ExamVision PowerGo Total Pure Total Intense LED Light User Guide
Attachment of Total Intense/Pure LED
- Attach the lamp to the frame part
- Connect the USB-C port to the lamp
- Fixate the cable on the right or lxxleft temple
- Connect the USB-C port to cithe PowerGo Control Unit
Operation of PowerGo control unit
Power on
Press the Power button once
Changing light intensity
One click increases the light intensity, and additional single clicks will cycle the unit through High, Medium and Low intensity settings
Power off
Press and hold for two seconds
Video
You can find the instructional video on our YouTube channel (www.youtube.com/@ examvision) or by scanning the QR code.
Additional information
Read the full Instruction for use for PowerGo here:
Read the full Instruction for use for Total Pure
Total Intense LED Light here:
Or just scan the QR code.
facebook.com/ExamVisionDK
instagram.com/examvision/
linkedin.com/company/examvision-aps
youtube.com/@ExamVisionChannel
Documents / Resources
 |
ExamVision PowerGo Total Pure Total Intense LED Light [pdf] User Guide PowerGo Total Pure Total Intense LED Light, PowerGo, Total Pure Total Intense LED Light, Total Intense LED Light, Intense LED Light, LED Light |
