ONE Universal Wireless GamePad
Specifications
- Working Platforms: iPhone, iPad, Android, Switch
- Working Modes: iOS, Android, PS4, PC, Switch
- Connection Types: Bluetooth v5.1
- Charging Time: 2-2.5 hrs
- Working Distance: 10 Feet
- Play Time: 8 hrs
- Net weight: 220g
Product Usage Instructions
Turbo Settings
- Enable/Disable Turbo: Press Turbo+ ABXY LT/RT
LB/RB to enable or disable turbo on a specific button. - Adjust Turbo Speed: Press Turbo+ DPAD
(UP/DOWN) to increase or decrease turbo speed. The gamepad will
vibrate. - Clear Turbo Setting: Long press the turbo
button to clear all turbo settings. All 4 LEDs will blink with
vibration.
Changing Vibration Levels
Press SR Button to increase vibration and SL Button to decrease
vibration. There are 4 levels to adjust vibration intensity.
RGB LED Control
Press the RGB LED Control Button to switch between 3 Lighting
Modes: BREATHING RGB, SINGLE COLOUR, NO LED.
Touch Panel Function
Enable/Disable Touch Panel Function: Press +
RIGHT JOYSTICK to enable and disable touch panel function.
Enhance Joystick Precision
Enable/Disable Joystick Precision: Press + LEFT
JOYSTICK to enhance or disable joystick precision.
Resetting the Gamepad
In case of unresponsiveness, use a pin to press the RESET button
located at the back of the gamepad.
FAQ
Why is this Gamepad not being detected by my device?
Make sure it is charged, in the correct pairing mode, not
connected to any other device. You may need to unpair and repair
it.
Why is the Gamepad disconnecting?
The Gamepad needs to be charged.
Facing any trouble with the connection?
The gamepad may require you to unpair and reset it for further
use.
Why is the Gamepad not working in all my games on Android or
iOS?
Ensure the game has support for Gamepads.
Why is the Gamepad not vibrating or speaker or headphone not
working?
These are special PS4 features and do not work on Android and
iOS.
TURBO SETTINGS
1 Enter the TURBO Speed Function:
ENABLE: Press Turbo+ ABXY LT/RT LB/RB to enable the turbo on a particular button.
DISABLE: Repeat above step to disable the turbo
LB RB LT RT
2 Adjust TURBO Speed:
Press Turbo+ DPAD (UP/DOWN) to increase or decrease the turbo speed. Gamepad will Vibrate
3 Clear ALL TURBO Setting:
Long Press the turbo button to clear the turbo. All the 4 LEDs will blink with a vibration.
LED 1,2,3,4 Blinking
SELECT TURBO
START
EZ
SELECT TURBO
START
EZ
SELECT TURBO
START
EZ
5 sec
CHANGING VIBRATION LEVELS
Press SR Button to Increase Vibration
Once Connected
SR MR
SL ML
LED STATUS
Press SL Button to Decrease Vibration
High Virbration
Medium Virbration
Low Virbration
No Virbration
THERE ARE 4 LEVELS TO ADJUST THE VIBRATION
Press the RGB LED Control Button to switch between 3 Lighting Modes.
1. BREATHING RGB 2. SINGLE COLOUR 3. NO LED
SR MR
SL ML
8
9
TOUCH PANEL FUNCTION
TROUBLESHOOTING
Enable Touch Panel Function
Press
+ RIGHT JOYSTICK
Disable Touch Panel Function
Again Press
+ RIGHT JOYSTICK
ENHANCE JOYSTICK PRECISION
Enable Joystick Precision
Press
+ LEFT JOYSTICK
Disable Joystick Precision
Again Press
+ LEFT JOYSTICK
SELECT TURBO
START
EZ
SELECT TURBO
START
EZ
Why is this Gamepad not being detected by my device?
Make sure it is charged. Make sure it is in the correct pairing mode. Make sure it is not connected to any other device. You may need to unpair and repair it.
Why is the Gamepad disconnecting? The Gamepads needs to be charged.
Facing any trouble with the connection? The gamepad may require you to unpair and reset it for further use.
Why is the Gamepad not working in all my games on Android or iOS? Ensure the game has support of Gamepads.
Why is the Gamepad not vibrating or speaker or headphone not working? These are special PS4 features and do not work on Android and iOS.
RESET THE GAMEPAD
SPECIFICATIONS
In the unlikely event the Gamepad is not responsive, use a pin to press the RESET button located at the back.
SR MR
SL ML
Working Platforms Working Modes
iPhone, iPad, Android, , Switch
iOS, Android, PS4, PC, Switch
Connection Types Charging Time Working Distance
Bluetooth v5.1 2-2.5 hrs
10 Feet
Play Time
8 hrs
Net weight
220g
10
11
WARRANTY STATEMENT
Amkette EvoFox One Universal Wireless Gamepad is backed by a 1 year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired or replaced at its discrete under the following conditions:
– The warranty applies to the original purchaser. Proof of original purchase is required. – The warranty does not cover the damage caused by misuse, abuse or improper storage. – In no event shall Amkette be responsible for any direct, incidental, consequential or other damages of any kind.
Please contact our Technical Support Line and/or send the defective product, postage pre-paid, together with the proof of purchase to our Customer Care Service Center to avail warranty service. Return postage will be paid by us.
CUSTOMER CARE SERVICE CENTER
Amkette House, C-64/4, Okhla, Phase-II, New Delhi-110020
1800-11-9090 (Toll Free) (9:30 AM – 6:00 PM)
+91 9312691448
(9:30 AM – 6:00 PM)
techsupport@amkette.in
FOR HASSLE FREE SERVICE REGISTER YOUR PRODUCT AT WWW.AMKETTE.COM/REGISTER
UNIVERSAL
WIRELESS GAMEPAD
QUICK START GUIDE
PRODUCT OVERVIEW
Charging LED EvoFox Home Button
TURBO Button SELECT Button
Button START Button
RT – Trigger
RB – Bumper
LB – Bumper
Mobile Clamp
LT – Trigger
L Analog
D Pad
EZ Click Setup
SELECT TURBO
START
LED Indication
Action Buttons R Analog
TYPE-C Charging Port
Vibration Increase SR Button
EZ Click Button Right
SR MR
SL ML
Reset Button
RGB LED Control
Vibration Decrease SL Button
EZ Click Button Left
1. SLEEP AFTER 10 SEC OF DISCONNECTION. 2. TURNS OFF AFTER 5 MIN OF NO ACTION. 3. TO POWER OFF PRESS THE EVOFOX BUTTON
FOR 5 SEC.
2
IN THE BOX
SELECT TURBO
START
EZ
Wireless Gamepad
Charging Cable
QSG
Docs
CHARGING THE GAMEPAD
Mobile Clamp
SELECT TURBO
START
EZ
CHARGING BLINKING GREEN LED
FULLY CHARGED STABLE GREEN LED
ENSURE GAMEPAD IS FULLY CHARGED BEFORE FIRST USE
IPHONE, IPAD AND APPLE TV MODE
1 Press 2 Open Bluetooth Settings on the device. 3 Connect to “DUALSHOCK 4 Wireless Controller”.
LED 4
SELECT TURBO
START
EZ
RECONNECTING: SIMPLY PRESS THE EVOFOX BUTTON TO POWER ON AND RECONNECT THE GAMEPAD
ANDROID MODE
1 Press 2 Open Bluetooth Settings on the device. 3 Connect to “Wireless Controller”.
LED 4
SELECT TURBO
START
EZ
RECONNECTING: SIMPLY PRESS THE EVOFOX BUTTON TO POWER ON AND RECONNECT THE GAMEPAD 3
ANDROID HID MODE
1 Press 2 Open Bluetooth Settings on the device. 3 Scan the devices and pair with “EvoFox One”.
LED 3
SELECT TURBO
START
EZ
RECONNECTING: SIMPLY PRESS THE EVOFOX BUTTON TO POWER ON AND RECONNECT THE GAMEPAD
PC X-INPUT MODE
1 Press
RB Button
2 Open Bluetooth Settings on the device.
3 Connect to “Xbox Wireless Controller”.
LED 1,2,3
SELECT TURBO
START
EZ
RECONNECTING: SIMPLY PRESS THE EVOFOX BUTTON TO POWER ON AND RECONNECT THE GAMEPAD 4
MODE
1 Connect to PS4 or PS3 with the provided cable.
2 Press
button until LED turns ON.
3 Disconnect the cable for wireless mode.
SELECT TURBO
START
EZ
RECONNECTING: SIMPLY PRESS THE EVOFOX BUTTON TO POWER ON AND RECONNECT THE GAMEPAD
SWITCH MODE
1 Open Settings Controllers Change Grip / Order
2 Press
L Button
3 The Gamepad connects automatically
after 7 seconds.
LED 1,2,3,4 Blinking in Waves
SELECT TURBO
START
EZ
RECONNECTING: SIMPLY PRESS THE EVOFOX BUTTON TO POWER ON AND RECONNECT THE GAMEPAD
5
EASY CLICK SETUP (MACROS)
Enable MACRO
1 Press
+ MR or
+ ML
together to set Macro. Connection
LED will Blink.
SELECT TURBO
START
EZ
1. YOU CAN USE UP TO 14 BUTTON IMPRESSIONS TO SET UP THE MACRO.
2. THE BUTTON SHOULD BE PRESSED ONLY IN THEE SEQUENCE TO CREATE THE MACRO.
3 CLEAR MACRO’S
Long Press
to clear the MACRO.
All 4 LEDs will Blink.
Your MACRO is now cleared.
SELECT TURBO
START
EZ
6
SR MR
SL ML
2
Disable Macro Repeat the above step 1.
LED 1,2,3,4 Blinking
7
Documents / Resources
 |
EVOFOX ONE Universal Wireless GamePad [pdf] User Guide ONE Universal Wireless GamePad, ONE Universal, Wireless GamePad, GamePad |