Instruction Manual

Easy Installation

For universal car stereo

1. Connect the red +12V wire of the camera to the positive wire of car reverse light, and connect the black GND wire to the negative wire of the car reverse light.
2. Connect the RCA output of the camera to the rear camera input of the car stereo.
3. Connect the red reverse trigger wire of the camera to the reverse control cable of the car stereo.
4. Installation finished.

For car-specific car stereo

1. Connect the red +12V wire of the camera to the positive wire of car reverse light, and connect the black GND wire to the negative wire of the car reverse light.
2. Connect the RCA output of the camera to the rear camera input of the car stereo.
3. Installation finished.

Documents / Resources

eonon Q03Pro Reversing Backup Camera [pdf] Instruction Manual Q03Pro, Q03Pro Reversing Backup Camera, Reversing Backup Camera, Backup Camera, Camera, Q04Pro, Q49Pro, Q50Pro, Q53Pro, Q63Pro, Q65Pro, R63, UA12-Plus, E46A12S, VWA12S, A0125

References

• User Manual