FTL4X Liquiphant Point Level Switch
“
Product Information
Specifications
- Product Name: Liquiphant FTL43/FTL60
- Type: Point level switch for liquids
- Compliance: Radio Equipment Directive RED 2014/53/EU, Part 15
of FCC Rules, Industry Canada licence-exempt RSS standard(s),
Japanese Radio Law, Japanese Telecommunications Business Law, NCC
Taiwan, IDMA Standards, etc. - Manufacturer: Endress+Hauser SE+Co. KG
- Version: V. 1, Rev. 4
- Release Date: 30-09-2024
Product Usage Instructions
Installation
- Choose a suitable location for installing the point level
switch. - Ensure the switch is securely mounted and aligned
properly. - Connect the necessary cables following the provided wiring
diagram.
Calibration
- Before calibration, ensure the switch is free from any liquid
contact. - Follow the calibration procedure outlined in the user
manual. - Test the switch after calibration to ensure accurate level
detection.
Maintenance
- Regularly inspect the switch for any signs of damage or
wear. - Clean the switch as recommended by the manufacturer to prevent
false readings. - Replace any worn-out parts promptly to maintain optimal
performance.
FAQ
Q: How do I troubleshoot if the point level switch is not
functioning correctly?
A: If the switch is not working properly, first check the power
supply and connections. Ensure proper installation and calibration.
If issues persist, refer to the troubleshooting section in the user
manual or contact customer support.
Q: Can the point level switch be used for detecting all types
of liquids?
A: The point level switch is designed for specific types of
liquids. Refer to the product specifications to determine
compatibility with the liquid you intend to detect. Using it with
incompatible liquids may result in inaccurate readings or damage to
the switch.
“`
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
unbekannt unbekannt
Products
Solutions
*unbekannt*
unbekannt
Special Documentation Radio approvals Liquiphant FTL43/FTL60
Point level switch for liquids
Services
EU
This device meets the requirements of the Radio Equipment Directive RED 2014/53/EU. The standards applied are listed in the Declaration of Conformity. The EU declaration of conformity is available at the following internet address: www.endress.com
Canada and United States
English This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: · This device may not cause harmful interference, and · This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Endress+Hauser SE+Co. KG may void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC & ISED radiation exposure limits set forth for an uncontrolled environment when it is installed to be operated in fixed or mobile operating conditions.
Français Le présent appareil est conforme aux CNR d’industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : · L’appareil ne doit pas produire de brouillage, et · L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Les changements ou modifications apportés à cet appareil non expressément approuvés par Endress+Hauser SE+Co. KG peuvent annuler l’autorisation FCC d’utiliser cet appareil.
Cet appareil est conforme aux limites d’exposition aux rayonnements d’ISDE établies pour un environnement non contrôlé lorsqu’il est installé pour fonctionner dans des conditions de fonctionnement fixes ou mobiles.
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
unbekannt
Mexico
IFETEL notice La operación de este equipo está sujeta a las siguientes dos condiciones: · (1) es posible que este equipo o dispositivo no cause interferencia perjudicial · (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada
Malaysia
A0042674
HIDF18000085
A0042675
Japan
Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is granted pursuant to the Japanese Radio Law () and the Japanese Telecommunications Business Law ( ). This device should not be modified (otherwise the granted designation number will become invalid).
Taiwan
NCC Endress+Hauser FTL43 Endress+Hauser SE+Co.KG
2
V. 1, Rev. 4, 30-09-2024
Endress+Hauser
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
Thailand
unbekannt
Qatar
ictQATAR Type Approval reg. No.: CRA/SM/2019/R-7593 Importer No: FT-2887
United Arab Emirates
A0042673
Endress+Hauser
V. 1, Rev. 4, 30-09-2024
3
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT
unbekannt
Singapore
Complies with IDMA Standards
DA108204
A0042672
Indonesia
Cert. ID: 90241/SDPPI/2023 PLG ID: 4962
Brazil
A0044414
A0039064
00732-21-07318 Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados
South Africa Australia
A0029561
4
V. 1, Rev. 4, 30-09-2024
Endress+Hauser
Documents / Resources
 |
Endress Plus Hauser FTL4X Liquiphant Point Level Switch [pdf] Instructions FTL4X, FTL4X Liquiphant Point Level Switch, Liquiphant Point Level Switch, Point Level Switch, Level Switch, Switch |
