1. Connect the power adaptor.

2. Make additional connections from the back of the Touchcomputer.3. Make additional connections from the bottom of the stand module.

4 Route the cable with a cable management kit. Press the power button to turn on the Touchcomputer.

Learn more about Elo at EloTouch.com
Americas
Tel +1 408 597 8000
EloSales.NA@elotouch.com
Europe (EMEA)
Tel +32 16 930 136
EMEA.sales@elotouch.com 
Asia Pacific
Tel +86 (21) 3329 1385
EloAsia@elotouch.com

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) make no representations or warranties with respect to the contents herein and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without the obligation of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc. © 2021 Elo Touch Solutions, Inc. All rights reserved. www.EloTouch.com