dynamic BIOSENSORS RT-IC Running Buffer
Product Description
Order Number: BU-RB-10-1
Table 1. Contents and Storage Information
| Material | Concentration | Amount | Storage |
| RT-IC Running Buffer (RB 1) (1.37 M NaCl,
26.7 mM KCl, 14.7 mM KH2PO4, 81 mM Na2HPO4, 0.1 % Pluronic, without calcium, without magnesium; 0.2 µm sterile filtered) |
10 x stock | 50 mL | 2-8 °C |
For research use only.
This product has a limited shelf life, please see expiry date on label.
Preparation
Dilute the 50 mL complete solution 10x RT-IC Running Buffer 1 by mixing with 450 mL ultrapure water. After dilution RT-IC Running Buffer is ready for use (137 mM NaCl, 2.67 mM KCl, 1.47 mM KH2PO4, 8.1 mM Na2HPO4, 0.01 % Pluronic, without calcium, without magnesium).
The diluted buffer should be stored at 2-8°C.
Filter running buffer before use in heliXcyto.
Contact
Dynamic Biosensors GmbH
Perchtinger Str. 8/10
81379 Munich
Germany
Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400
Woburn, MA 01801
USA
Order Information order@dynamic-biosensors.com
Technical Support support@dynamic-biosensors.com
www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
Documents / Resources
 |
dynamic BIOSENSORS RT-IC Running Buffer [pdf] User Manual BU-RB-10-1, RT-IC Running Buffer, RT-IC, Running Buffer, Buffer |