2024 Remi Large Sideboard
“
Specifications
- Product Name: Remi Large Sideboard
- Dimensions: 150x42cm, 80.7×38.5cm, 61.2x33cm, 139.4x4cm, and
more (refer to component parts list) - Recommended Assembly: Two people
- Manufacturer: Dunelm
Product Usage Instructions
1. Pre-Assembly Preparation
Before starting the assembly process, ensure you have all the
necessary parts and tools as listed in the manual (refer to pages 2
and 3).
2. Assembly Process
1. Lay out all components in a clean, level area with enough
space to move around.
2. Familiarize yourself with the fittings and components before
starting the assembly.
3. Follow the step-by-step guide provided in the manual for easy
assembly.
4. It is recommended to have two people assemble the sideboard
together for ease and safety.
3. Safety and Care Instructions
1. Read and understand all instructions before beginning
assembly to ensure safety.
2. Keep small parts away from children and pets to prevent
choking hazards.
3. Dispose of packaging responsibly to avoid accidents.
4. Secure the furniture to the wall using the wall fixing strap
provided to prevent tipping over.
FAQ
Q: Can I assemble the sideboard alone?
A: While it is possible to assemble the sideboard alone, it is
recommended to have two people for easier and safer assembly.
Q: What should I do if I encounter missing parts during
assembly?
A: In case of missing parts, please contact Dunelm customer
service at 03451 656565 for assistance.
Q: Is it necessary to use the wall fixing strap?
A: Yes, it is recommended to use the wall fixing strap provided
to secure the sideboard to the wall and prevent accidents.
“`
Remi Large Sideboard
INSTRUCTIONS
www.dunelm.com
www.dunelm.com
Thank you
Dear Customer
Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly.
If for any reason you feel we haven’t lived up to the high standards we set ourselves, please don’t hesitate in contacting us on 03451 656565 where our team will be very keen to understand what has gone wrong and, more importantly, put it right.
The next step…
There is no need to feel daunted by the number of parts and fittings in front of you, we have compiled this straight forward, step-by-step guide to make sure that assembling your furniture is as easy as 1, 2, 3,4. Before you begin, we advise that you check that you have everything you need to get started.
Top tip
Find a space to spread everything out across the floor before you begin assembling the item. Lay each panel down on a clean and level area, ideally in the room of intended use, ensuring there is enough room to manoeuvre around the item. It is recommended that two people assemble this product together. The full list of furniture parts, fixtures and fittings, as well as the tools you will need for assembly can be found on page 2 and 3 of this manual.
Top tip
Identify all of the fittings, make sure that you have them all prepared and familiarise yourself with each component, to make things easier when you are putting it all together.
Safety and care advice
IMPORTANT – The first step you need to take is to ensure your safety! Please take the time to read and understand these instructions before assembling your furniture.
Please keep these instructions for future reference.
Keep children and animals away from the assembly area. This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from babies and children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and responsibly.
From time to time check that there are no loose fittings on the unit, re-tighten when necessary.
Two people may be required for the assembly of this product.
Once items are part or fully assembled they are not returnable unless faulty.
This item is not for outdoor use unless stated otherwise.
Some items will be supplied with a wall fixing strap, which we recommend is used to secure the item to the wall, to prevent a child from accidentally pulling furniture over.Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
www.dunelm.com
Component parts supplied
Ref Dimensions
Visual
Qty
Ref Dimensions
Visual
Qty
1 150x42cm
1
12 63.5cm
1
2 80.7×38.5cm
1
13 64.8×31.5cm
1
3 80.7×38.5cm
1
14 17.4x4cm
2
4 61.2x33cm
1
15 36.2x30cm
2
5 61.2x33cm 6 139.4x4cm
1
16 59.1×36.6cm
2
1
17 58.6×14.5cm
3
7 63.8x6cm
2
18 30×14.5cm
3
8 139.4x33cm
1
19 30×14.5cm
3
9 139.4x6cm
1
20 26.4x4cm
3
10 62.2×37.3cm
2
21 59.8×27.4cm
3
11 64.8×31.5cm
1
22 65×19.5cm
3
www.dunelm.com
Parts and fittings
drawer runners to make assembly even easier.
PRE-FITTED RUNNERS
Fixtures and fittings mm 10 20 30 40 50 60 70 80 90 100 110 120 130 supplied(actual size)
Re Dimensions Qty
A 8X30mm 22
B 5X40mm 19
C 3.5X14mm 28
D 4X22mm
8
E 5X25mm
1
Fixtures and fittings supplied(not to scale)
Re Dimensions
Visual
Qty
F
N/A
1
G
N/A
38
H
N/A
38
I
N/A
2
J
N/A
4
K
N/A
8
Re Dimensions
Visual
Qty
L
N/A
4
M
N/A
2
N
N/A
16
O
N/A
8
P
N/A
16
www.dunelm.com
Exploded view
1 10
10 2
11 12 13
15
6 7
7
4
8 14
15 5
9 14
17
16 16
18 20
3
19 21
22
x3
www.dunelm.com
Step 1:
Ax18
Gx7
4
CAM-LOCK
Tighten until shoulder is flush with panel.Do not overtighten or undertighten(see example below)
Shoulder NO GAP
Panel
Panel
7 x2
5
8 9
A x 18
G x7
www.dunelm.com
Step 2:
Ax4
CAM-LOCK
Tighten until shoulder is flush with panel.Do not overtighten or undertighten(see example below)
Shoulder NO GAP
Panel
Panel
2
Gx31
3
Cx4 Ix2
1
22 x3
A x 4
C x4
G x 31
I x2 www.dunelm.com
Step 3:
WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
CORRECT
INCORRECT
7 7
5
H x 7
4 8
9
Hx7
www.dunelm.com
Step 4:
4 8
5
B x 4
Step 5:
4 6
Bx4
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
2
CORRECT
INCORRECT
8
9
Hx4
H x 4
www.dunelm.com
Step 6:
5
6
3
Step 7:
Hx4
H x 4
L x 4
M x 2
WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
CORRECT
INCORRECT
Lx4
14
Mx2
www.dunelm.com
Step 8:
10
11 10
12 13
Step 9:
1
WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
CORRECT
INCORRECT
Hx8
H x 8
www.dunelm.com
Step 10:
Px4
8
E x 1
Step 11:
6
F x 1
E F
P x 4
X Y
N x 16
Nx16
X=Y=90°
www.dunelm.com
Step 12:
Ox8
15
15
O x 8
Step 13:
Cx8 Jx4
Dx2
16
Kx2
x2
C x 8
D x 2
J x 4
K x 2
www.dunelm.com
Step 14:
16
16
Cx8
C x 8
www.dunelm.com
Step 15:
16
16
Cx8
C x 8
www.dunelm.com
Step 16:
19 17
Bx15
20 18
B x 15
Step 17:
21
x3
x3
www.dunelm.com
Step 18:
22
WHEN FITTING CAMS ENSURE STARTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
CORRECT
INCORRECT
H x 15
Step 19:
Hx15 Px12
P x 12
x3
Dx6 Kx6
D x 6
K x 6
x3
www.dunelm.com
Step 20:
Please slide the drawer backwards and forwards until the drawer runner is sliding smooth.
www.dunelm.com
Tip kit instructions
Your item of furniture has been provided with a wall attachment for your safety. It is highly recommended that this is used to prevent furniture over tipping which can cause serious or fatal crushing injuries.
· Never allow children to climb or hang on the drawers, doors or shelves. · Place the heaviest items in the lower drawers or shelves. · Never open more than one drawer at a time. · A suitable attachment device is provided with your product; however you will need to source suitable
fixings for your wall. · If in doubt, please consult a qualified tradesperson. · Two different wall fixings types could be provided with our furniture, the correct type is in this bag to suit
your furniture. Further information below.
Plastic cable tie image
Metal L bracket image
· Please ensure that the plastic bracket is screwed into the wall as the image shows.
· Wall screws and plugs are not provided however please use our guide to help you choose the correct screw / plug type for your wall.
· When drilling the walls, always ensure there are no hidden wires or pipes.
· Please ensure that the Metal L bracket is screwed into the wall at the image shows, the bracket location may vary on unit location and personal preference.
· Wall screws and plugs are not provided however please use our guide to help you choose the correct screw / plug type for your wall.
· When drilling the walls, always ensure there are no hidden wires or pipes.
www.dunelm.com
Wall fixings
Step by step
Important
When drilling into walls always check there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints
1. General Rule; Always use a larger screw and wall plug if you are not sure. 2. Ensure you use the recommended drill bit to match the wall plug and hole size. 3. Ensure you drill the hole horizontally, do not force the drill or enlarge the hole. 4. Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the plug is fitting below the
ceramic tile to avoid splitting or cracking. 5. Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types of Walls
You can use one of the following types of wall plug if your walls are made of brick, breeze block, concrete, stone, wood or plastic board.
3. SHIELD ANCHOR Wall Plug
Heavy loads
6. HAMMER FIXING Wall Plug
1. STANDARD Wall Plug
General wall materials
These come in various sizes and are made from plastic or sometimes wood fibre.
2. GENERAL PURPOSE Wall Plug
Aerated/Breeze block
For use with heavier loads such as TV & Hi-fi Speakers and Satellite Dishes etc.
4. CAVITY FIXING Wall Plug
For use with plaster board partitions or hollow wooden doors.
5. CAVITY FIXING HEAVY DUTY Wall Plug
Generally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, a General Purpose Plug can be used.
For use with plaster board partitions or hollow wooden doors.
For use with walls stuck with plaster board. The hammer fixing allows it to be fixed to the wall rather than the plaster board. Always check the fixing is secure to the retaining wall.
Care and Maintenance
Safety Always check the fitting and location to ensure your safety in and around the home.
Fitting From time to time check the fitting to ensure the wall plugs or screws do not become loose.
www.dunelm.com
Wall fixings
· This wall fixing is provided for your safety and we recommend that once in position the unit is secured to the wall for extra stability.
· Wall fixings may vary depending on item of furniture purchased.
· Wall fittings are not provided as different wall types require different raw plugs and screws.
· Please ensure that you use fittings that are suitable for your wall type (see next page for a general guide).
· Please ensure that the head of the screws used has a diameter greater than the diameter of the hole on the wall fixing and that the fixing is safe and secure before using.
· When drilling into the walls, always ensure there are no hidden wires or pipes.
· If you are unsure, we recommend you consult a qualified tradesperson.
WALL
www.dunelm.com
Assembly instructions
www.dunelm.com
Wood care advice
Wood care advice
Wood is a natural product and each piece is individual.
As a natural product, wood is affected by temperature and humidity. We recommend that you avoid placing the furniture directly in front of heat sources such as radiators or fires as this can cause cracking or warping over time.
The colour will mellow over time and new items can vary in shade from items that you have already purchased.
Strong direct sunlight can affect the colour dramatically, so try to avoid this as much as possible, we also recommend that any ornaments, coasters and items placed on the product are periodically moved around to allow the colour to mellow evenly.
Always use matts and coasters to protect the surface when placing items on the furniture. This will help to protect the finish from heat, liquids or items that might scratch your furniture.
If items are to be placed on the surface of your furniture and have rubber feet, it is advisable to use mats to prevent marking.
Always lift your furniture into place, avoid dragging it across the floor as this can cause damage to joints.
When placing furniture on a wooden or laminate floor, please ensure that the plastic or felt protectors are securely fitted and in place.
Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners.
From time to time check that there are no loose screws on this unit.
Remove any spills immediately to avoid staining.
Dust regularly with a soft lint free cloth or duster.
The use of abrasive polish or silicon based polishes is not advised as these can affect the polished finish and joints over time.
Uneven floors could give the impression that doors of wall units and wardrobes are out of alignment. Be aware of this and compensate if necessary by adjusting the hinges or packing a corner to level the item. Please refer to the instructions, included with your furniture, and adjust accordingly.
If your furniture becomes stained, scratched, chipped or suffers other damage, we recommend professional help is sought to restore it. Please contact our customer services line for recommended agents.
Always follow fitting instructions carefully and retain them for future use.
Manufactured in China for Dunelm (Soft Furnishings) Ltd.LE7 1AD & Dunelm (Soft Furnishings) Londonderry Ltd. BT48 8QN
Documents / Resources
 |
Dunelm 2024 Remi Large Sideboard [pdf] Instructions 2024, 2024 Remi Large Sideboard, Remi Large Sideboard, Large Sideboard, Sideboard |
