DT Research 582TM Battery Powered Computer
INTRODUCTION
Thank you for purchasing the DT Research 582TM All-in-One Battery Powered Computer. Powered by an Intel® Core™ Ultra processor, the 582TM guarantees high-performance yet energy-efficient functionality while offering at-a-glance examination thanks to its big, easy-to-read display. With the optional hot-swappable batteries, patient data can be managed fluidly without operations being interrupted due to the act of replacing batteries, while the built-in Wi-Fi and
other optional data-captumodules further improve any point-of-care applications.
Please examine the contents below to ensure a smooth set-up and startup. The All-in-One Battery PowComputersteris ready for use out of the box in its default configuration when powered by the energy source provided. The following content eludes instructions and guidance on hardware features and applications for the computer. Please contact your device provider for informationon about software operating systems or relevant software applications.
PACKAGE CONTENTS
- 582TM
- 3 DR202 Li-ion batteries(optional)
- AC-DC power adapter with power cord
- Basic operation guide
Wireless Networking
Wireless LAN
The Battery Poweredoftenn is delivered with an embedded (user-inaccessible) 802.11ax WLAN adapter equipped with a hidden custom antenna.
- Through the support of typical WLAN adapters, the Medical-Grade Integrated LCD System should be able to detect all 802.11 access points in the vicinity for you to select the access point of your choice for connection.
- The SSID and WEP/WPA/WPA2 (if enabled) parameters on the Medical-Grade Integrated LCD System and the access points have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
- When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your networking equipment literature to properly configure associated settings such as Authentication mode, etc.
- Refer to the access point operating manuals for setting up the 802.11 access points.
Cleaning the Screen
- A screen cleaning solution that is alcohol-free and non-abrasive can be used to clean the touch screen.
- Cleaning with a micro-fiber cloth is recommended.
- Please spread the solution onto the cloth and then clean the touch screen.
Cleaning the Anti-microbial Enclosure
- Use a soft/non-abrasive cloth moistened with water to clean the enclosure.
- If using a cleaner, an alcohol-free and oxide-free cleaning liquid is recommended.
- To prevent scratching the anti-microbial coating, please wipe gently.
CAUTION
- Disposal of a battery inta o a fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
OPERATION
Mounting the Battery PowerComputer
The Battery Power Computers support 1a 00 × 100 mm VESA standard mounting option. So, it can be easily attached to a medical cart. Please use four M4 * 17 type screwsto install the Battery Power Computer onto the medical cart.
I/O Ports
The Battery Powered Computer has a comprehensive set of I/O ports. The following ports are located along the lower edge of the unit.
Battery Replacement
Hot-swappable batteries allow for quick and easy changes without interrupting the continuous operation of computer systems To insert/ replace the hot-swappable batteries for 582TM:
- Open the battery lid.
- Hold the battery with its yellow label facing and insert it into the battery slot.
- Closethebatterylid. Make sure the lid is the lid.
PRECAUTIONS
- Always exercise care when operating and handling the Battery Powered Computer.
- Never disassemble any portion of the enclosure, as this will void any product warranty onthe Battery Powered Computer.
- Do not use any AC/DC adapter other than the one provided with the device or a replacement acquired from the manufacturer.
- In the unlikely event that smoke, abnormal noise or
BASIC FEATURES
The Battery PoweredComputer integrates a bright 21.5” display with a high-performance system, USB ports, and integrated options such as a touchscreen, hot-swappable batteries, and smart card reader for a comprehensive point-of-healthcare solution.
Powering ON and OFF
If your Battery Powered Computer comes wwithbattery packs, please open the battery slot caps and then put them in the battery packs one by one. If not, please use the AC-DC adapter with the battery-powered computer power supply. To activate the Battery Powered Computer, push and quickly release the Power Button and the display will come on in a few seconds. To put in Standby mode, push and quickly release the Power Button to turn off for extended storage.
NOTE
The battery packs(optional)shipped with your device may be low in power—please use the AC-DC adapter with the Battery Powered Computer when setting up the advisor the first time to fully charge the battery pack you may charge the battery packs with the attached to the Battery Powered Computer, or with the optional battery charger kit.
NOTE
When the battery pack(s) is(are) charging, the blue-colored Battery LED should blink slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may have been drained substantially. Try unplugging/replugging the ACDC adapter to the Battery Powered Computer a few times to activate the charging process.
NOTE: To conserve power, use (push and quick release)the Power Button to put the device in “Standby” mode while not in use. Pushing briefly on the same button will wake up the system within seconds.
NOTE: Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the devices for more hardware shutdis intended to be a means of recovery from device lockups, and not as normal operation.
NOTE: If connecting an external monitor to the Battery battery-powered computer (via HDMI port), you power your Powered Computer with the provided AC-DC power adapter.
Power/Battery LED Status
- Blue indicates the battery is 25% to 100% charged
- Blinking blue indicates the battery is charging
- indicates the battery is between 11% to 25%
- BlinkingOrange indicates the battery is below 10%
RF Exposure Information (RED & UKCA)
To be protected against all verified adverse effects, a separation distance of at least 200mm must be maintained between the antenna of the radio having max. 2.5dBi antenna and all persons. Hereby, [DT Research, Inc.] declares that the radio equipment type [582TM] complies with Directive 2014/53/EU and UK Radio Equipment Regulations 2017. The full text of the EU and UK Declaration of Conformity is available at the following internet address: http://www.dtresearch.com.
The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz and 5945-6425MHz for this device are restricted to indoor use only within all European Union countries (BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/N O/CH/IS/LI/UK(NI).
Maximum EIRP for EU
- Bluetooth:2402MHz-2480MHz 11.30dBm
- Bluetooth LE:2402MHz-2480MHz 7.60dBm
- Wifi: 2412MHz-2472MHz/2422MHz-2462MHz 18.89dBm
- Wifi: 5150MHz-5725MHz 19.33dBm
- Wifi: 5725MHz-5875MHz 12.99dBm
- Wifi: 5925MHz-6425MHz 17.38dBm
Operating authorizations must exist to operate the product in the following member states of the European Union, refer to the table below.
- Importer Name: Concept International GmbH
- Importer Address: Zweibrückenstr. 5-7 80331 München Germany
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates us, es and can radiate radio frequency energy and, if not installed and the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure Compliance
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 200mm of the radiator and your body: Use only the supplied antenna.
Indoor Client 6XD statement
- FCC regulations restrict the operation of this device to indoor use only.
- The device will only associate and connect with a low-power indoor access point or subordinate device and never directly connect to other client devices.
- The device will always initiate transmission under the control of a low-power indoor AP or subordinate except for brief transmissions before joining a network. These short messages will only occur if the client has detected an indoor AP or subordinate operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request.
- ttransmissions willbe lower or equal to the power advertised by the indoor low-power access point or subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6XD.
- Prohibited for control of or communications with unmanned aircraft systems, including drones.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier Trade Name: Model No.: 582TM
Responsible Party – U.S. Contact Information DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
IC Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This Class [B] digital apparatus complies with Canadian ICES-003.
RF Exposure Compliance
To maintain compliance with RSS’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 200mm of the radiator and your body: Use only the supplied antenna. The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5250 MHz for this device are restricted to indoor use only.
IC Wi-Fi 6E Statement
Devices shall not be used for control of or communications with unmanned aircraft systems. Low-power indoor access points and indoor subordinate devices shall bear statements acknowledging both of the following restrictions in the user manual and, where feasible, in a conspicuous location on the device: Operation shall be limited to indoor use only.
Documents / Resources
 |
DT Research 582TM Battery Powered Computer [pdf] User Guide 600-AX210NG, YE3600-AX210NG, YE3600AX210NG, 582TM Battery Powered Computer, 582TM, Battery Powered Computer, Powered Computer, Computer |
