DGS-FIFTYSUB STABILIZER KIT
INSTRUCTIONS
DGS-FIFTYSUB Stabilizer Kit for Fifty Sub
DESCRIPTION: Stabilizer kit for FIFTY SUB stack mounting
PACKAGE CONTENT
A. (4x) Stabilizer floor bracket
B. (4x) Three lobes knob
C. (2x) V bracket
CAUTION: Only qualified personnel may use the DGS-FIFTYSUB stabilizer kit. To prevent hazards to people, animals and/or objects, make sure that the installation is stable and secure. Follow the safety regulations and laws of the country in which you use the product. Install the product as described in these instructions. To use this accessory safely, check that it is working and intact before use.
CHECK (IF ANY) THE LATEST VERSION OF THIS DOCUMENT ON WWW.DBTECHNOLOGIES.COM
INSTALLATION
- Align the holes of the stabilizer floor brackets to the holes on the side of the subwoofer as shown and fasten screwing the B lobe-knob.
- In case of stack mounting of two subwoofers, use the V bracket to provide more stability to the cluster.
- Align the holes of the V bracket to the one of the upper subwoofers and fasten screwing the B lobe-knobs.
Features, specification and appearance of products are subject to change without notice. dB Technologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation change or improve products previously manufactured.
420120409Q REV.1.0
DGS-FIFTYSUB
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
Tel +39 051 969870
Fax +39 051 969725
www.dbtechnologies.com
info@dbtechnologies-aeb.com
Documents / Resources
 |
dB TECHNOLOGIES DGS-FIFTYSUB Stabilizer Kit for Fifty Sub [pdf] Instructions DGS-FIFTYSUB, Stabilizer Kit for Fifty Sub, DGS-FIFTYSUB Stabilizer Kit for Fifty Sub, DGS-FIFTYSUB Stabilizer Kit |
