Dante logo

Dante NewHank DU 22 2 Channel USB Input or Output Adapter

Dante NewHank DU 22 2 Channel USB Input or Output Adapter fig (2)

Thank you for buying NewHank DU 22, this guide will take you know how to use this product.

Product Introduction

This product is applied to the audio system field to realize the USB signal and Dante network audio signal conversion function.

Product Feature

  1. Function Introduction: Support USB signal and Dante network audio signal conversion
  2. Input & Output:2 channel

Technical Parameters

Model No. NewHank DU 22
Product Type  Audio signal adapter
 

Function

 
The USB signal and Dante network

audio signal conversion

 
RJ45 Port 1
Connection RJ45 and USB A type
Power supply USB
Sampling rate 48kHz
Network transmission Dante IP AES67 RTP audio
USB Specification level USB 2.0 devices
Operating temperature 0-40℃
Size (LxWxH) 652mm x 32mm x 22mm
Weight 0.2kg

Product OverviewDante NewHank DU 22 2 Channel USB Input or Output Adapter fig (2)

Product Connect

Follow the below steps to set up a Dante network for controlling.

  1. Download and install the Dante Controller from Audinate website (www.audinate.com).
  2. Connect the device to the switch using Dante network audio system with network cable
  3. The analog audio transmission device is connected through the XLR interface
  4. Search for devices in Dante Controller software, Select and open the devices to be configured,On the Routing page, match the input row with the output column with a custom check.
  5. Once set up and configured the audio routing between audio device, the audio device will remember and save the settings.

Dante NewHank DU 22 2 Channel USB Input or Output Adapter fig (3)

Packing List

  • QC Card 1 Piece
  • DU 22  1 Piece

Notes

In order to ensure the reliable use of equipment and the safety of personnel, please follow below details when installing, using and maintaining:

  1. Keep the working environment well ventilated, so that the heat generated by the equipment can be discharged in time, so as not to damage the equipment due to high temperature.
  2. Non-professionals without permission, do not dismantle the equipment without authorization, so as to avoid the risk of electric shock. Do not repair, so as not to increase the damage of the equipment.
  3. Do not spill any corrosive chemicals or liquids on or near the equipment.

Warranty Card

  • Date of production:
  • Model No.:
  • Serial No.:

Documents / Resources

Dante NewHank DU 22 2 Channel USB Input or Output Adapter [pdf] User Guide
NewHank DU 22, 2 Channel USB Input or Output Adapter, NewHank DU 22 2 Channel USB Input or Output Adapter, USB Input or Output Adapter, Input or Output Adapter, Input Adapter, Output Adapter, Adapter

References

Leave a comment

Your email address will not be published. Required fields are marked *