Danfoss-LOGO

Danfoss TP5001B Programmable Room Thermostat

Danfoss-TP5001B-Programmable-Room-Thermostat-PRODUCT

What is a programmable room thermostat?

  • A programmable thermostat allows you to set the times at which you want your heating to be at a specific temperature.
  • A room thermostat works by sensing the air temperature and switching on the heating when the air temperature falls below the thermostat setting, switching it off once this set temperature has been reached.
  • The TP5001 programmable room thermostat has made intelligent heating control easier than ever before.

Setting Time and Date

  • a. Press Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1)button, and the screen will change to show the current year.
  • b. Adjust using Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3) to set the correct year. Press Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1)to accept. Repeat step b to set month and time settings.

Advanced Programmable Timer

The Advanced Programmable Timer mode enables the setting of a timer-controlled program for automatic comfort temperature, and an energy-saving lower setback temperature if standard room comfort temperature is not required. The example below for 5/2 day setup, 4 Temperature settings

The function consists of 2 programs:

  • P1 with 4 events over weekdays (Mon. To. Fri.)
  • P2 with 4 events over weekends (Sat. Sun.).
  • P1: PressDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1) once to activate the product.
  • Press Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1)for 3 seconds to display Mo. Tu. We. Th. Fr.

P1, Event 1:

  1. Use Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3) to select the start hour.
  2. PressDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1) to accept the setting.
  3. Use Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3) to set the minute.
  4. PressDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1) to accept the setting.
  5. Use Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)or Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3)to select the temperature.
  6. PressDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1) to accept the setting.

P1, Event 2–4:

  • Repeat the Event 1 procedure for programming Events 2–4.

P2:

  • Sa. Su. are now shown in the display.

P2, Event 1:

  1. Use Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3) to select the start hour
  2. Press Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1)to accept the setting.
  3. Use Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3) to set the minute.
  4. Press Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1)to accept the setting.
  5. Use Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3) to select the temperature.
  6. PressDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1) to accept the setting.

P2, Event 2–4:

  • Repeat the Event 1 procedure for programming Event 2–4.

If the working mode is set to 24 hours, only the P1 program will be available (same times each day of the week), to change this see the User settings section of this document.

Display and Navigation Details

Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (4)

Display & Navigations

Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (5)

Setting/Changing the Temperature

  • a. Press Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3) at any time to change the desired temperature value. SET is shown in the display.
  • b. When releasing the Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3), after around 5 seconds, the display returns to showing the actual temperature. This temperature change is only temporary and will be maintained only until the next programmed setting.

Holiday Mode

Holiday Mode selects the comfort temperature typically when the home is unoccupied

  • a. Press M to enter into Holiday mode and Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (6)will be displayed.
  • b. Holiday mode temperature can be set in User settings, 07.
  • c. Press M again to exit Holiday mode.

Frost Protection Temperature

  • a. The thermostat is turned OFF (Standby) mode by pressingDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1). In OFF (Standby) mode the thermostat is set to Frost Protect temperature setting and will switch the output On if the measured temperature falls below the Frost protection temperature setting.
  • b. Frost protect icon and current temperature will be displayed.

User Settings

  • a. Press the M button once to illuminate the screen, and next press M for 6 seconds to enter the User setting mode. Press M for parameter selection and set the parameter range via Danfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (2)orDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (3). Complete all adjustments.
  • b. To exit pressDanfoss-TP5001B-Programmable-Room-Thermostat-FIG-1 (1), automatic exit after 20 seconds when no button is pressed.
No. Parameter settings Settings range Default
01 Working mode 01: Manual
02: Schedule timer 5/2 day
03: Schedule timer 24hr
02
02 Heat control mode 01: On/offload compensation
02: On/off standard
01
03 Heat control start-up mode 01: Normal start control
02: Delayed start control
03: Optimised start control
01
04 Temperature limit high Between low (05) and 35° C 35° C
05 Temperature limit low Between 5° C and high (04) 5° C
06 Frost protect temperature Between 5° C and 15° C 5° C
07 Holiday mode temperature Between low (05) and high (04) 18° C
08 Timer display 01: 24hr
02: 12hr
24hr
09 Service due setup Installer setting only  
10 RF Pairing (TP5001RF only) 00: RF pairing mode off
01: RF pairing mode on
00
11 Auto daylight saving 01: On
02: Off
01

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are the property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. © Danfoss | FEC | 09.2020 087R1003

Documents / Resources

Danfoss TP5001B Programmable Room Thermostat [pdf] User Guide
TP5001B Programmable Room Thermostat, TP5001B, Programmable Room Thermostat, Room Thermostat, Thermostat

References

Leave a comment

Your email address will not be published. Required fields are marked *