Danfoss PMFL Liquid Regulating Valve
Specifications
- Product Name: Special springs for liquid level regulating valve Type PMFL
- Model Number: 027R9614
- Compatible Models: PMFL 80-1…7, 125, 200, 300
Product Usage Instructions
- Remove the top cover of the valve.
- Take out the STANDARD spring set (1) from the valve.
- Install the special spring set (2) into the valve.
- Reattach the top cover securely.
- Attach the label provided to the top cover bolt (3). The label should indicate either WEAK or STRONG.
| Item | Strength | Springset / Label | Code No. (Weak) | Code No. (Strong) |
|---|---|---|---|---|
| PMFL 80-1…7 | WEAK / STRONG | Springset / Label | 027F0123 | 027F0118 |
| PMFL 125 | WEAK / STRONG | Springset / Label | 027F0124 | 027F0119 |
| PMFL 200 | WEAK | Springset / Label | 027F0125 | — |
| PMFL 300 | WEAK / STRONG | Springset / Label | 027F0126 | 027F0121 |
Fitting
- Remove top cover.
- Remove STANDARD spring set (1).
- Fit special spring set (2).
- Fit top cover.
- Fit label by top cover bolt (3).
- The label carries the designation WEAK or STRONG.
FAQ
Q: How do I know which spring set to use?
A: The choice between using the WEAK or STRONG spring set depends on the specific requirements of your liquid level regulating valve. If you need higher pressure regulation, use the STRONG spring set. For lower pressure regulation, use the WEAK spring set.
Q: Can I use these special springs with other valve models?
A: These special springs are designed specifically for use with the PMFL series of liquid level regulating valves. It is recommended to only use them with compatible models as indicated in the specifications.
Documents / Resources
 |
Danfoss PMFL Liquid Regulating Valve [pdf] Installation Guide 80-1, 125, 200, 300, PMFL Liquid Regulating Valve, Liquid Regulating Valve, Regulating Valve, Valve |