Danfoss PC 78xA IDCM Programming Software
Specifications
- Model: AK-PC 78xA
- IDCM Programming
- LT IDCM Compressor Setup
- IDCM Compressor AO Setup
LT IDCM Compressor Setup
Follow these steps to set up the LT IDCM Compressor:
- Ensure `Speed comp. LT-1 AO’ is wired directly to `PI-2 in voltage’ AI.
- Module and point numbers are used as examples only.
PI Controller Setup
For setting up the LT IDCM Compressor General Purpose PI Controller:
- Use PI-2 as an example to create `PI-2 in voltage’ AI.
- Module and point numbers are used as examples only.
PI-2 in Voltage AI Setup
Set up the PI-2 in voltage AI using the following steps:
- Module and point numbers are used as examples only.
PI-2 Analog Output Setup
To complete the IDCM programming, follow these steps:
FAQ (Frequently Asked Questions)
- Q: What is the purpose of LT IDCM Compressor Setup?
A: The LT IDCM Compressor Setup is designed to configure the compressor settings for optimal performance.
Programming Guide
AK-PC 78xA IDCM programming\
LT IDCM Compressor Setup
IDCM Compressor AO Setup
- ‘Speed comp. LT-1 AO’ is wired directly to ‘PI-2 in voltage’ AI created in next step.
- Module and point numbers used as example only.
LT IDCM Compressor Gen Purpose PI Controller Setup
PI-2 in voltage AI Setup 
- Module and point numbers used as example only.
- PI-2 used as example only.
PI-2 Analog Output Setup
IDCM programming complete.
Danfoss A/S
Climate Solutions • danfoss.com • +45 7488 2222 catalingues descriptions ad, Vertisemits ete. and whation made available in writing, orally, etectronically odie desian wend, smal bie considered informative, anchis only bia in groand manuals, bates reserveste right to ate in proctatis without notice. This also applies to products ordered sut not differed provided that suatalierations cautes made without changes to form, it or All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
Documents / Resources
 |
Danfoss PC 78xA IDCM Programming Software [pdf] User Guide 78xA, PC 78xA IDCM Programming Software, 78xA IDCM Programming Software, IDCM Programming Software, Programming Software, Software |
