EV220B Solenoid Valve

“

Product Specifications

• Product Name: Solenoid Valve Type EV220B
• Models: EV220B 6 – EV220B 22
• Manufacturer: Danfoss
• Max. Pressure (PT):
  • For DN 6 – 10: 20 bar (290 psi)
  • For DN 11.5 – 22: 10 bar (145 psi)
• Max. Test Pressure (PT):
  • For DN 6 – 10: 30 bar (435 psi)
  • For DN 11.5 – 22: 15 bar (225 psi)
• Standards: EN 60730-2-8

Product Usage Instructions

Installation Guide

Follow the steps below to install the Solenoid Valve Type
EV220B:

1. Identify the appropriate model based on your requirements.
2. Ensure proper alignment of components A, B, C as per the
   provided diagram.
3. Connect the valve according to the A1, A2, A3, B1, B2, B3
   markings.
4. Check for any leaks and make sure the valve is in the OFF
   position before use.

Frequently Asked Questions (FAQ)

Q: What is the maximum pressure rating for the Solenoid Valve
Type EV220B?

A: The maximum pressure varies based on the model – for DN 6 –
10 it is 20 bar (290 psi), and for DN 11.5 – 22 it is 10 bar (145
psi).

Q: How do I know if the valve is installed correctly?

A: Ensure that components A, B, C are aligned as per the
provided diagram and that there are no leaks after installation.
The valve should also be in the OFF position before use.

“`

Installation guide

Solenoid valve Type EV220B 6 – EV220B 22

A

B

C

032R9328
Danfoss 18F116.10 Danfoss 18F117.10
032R9328

ID

Danfoss 32F905.11 Danfoss 32F903.11

A1 B1
OFF B
A

A2 B2

B1

B2

OFF

1 | © Danfoss | DCS (rja) | 2016-05

A3 B3
A B
B3
IC.PI.200.P4.22

4

5

6

7

8

9

10

11

12

13

Max. PT Bar

DN 6 – 10 11.5 – 22

MWP

[bar] [psi]

20

290

10

145

Max. test pressure PT

[bar] 30 15 [psi] 435 225 EN 60730-2-8

Visit www.products.danfoss.com for further technical data 2 | © Danfoss | DCS (rja) | 2016-05

IC.PI.200.P4.22

Documents / Resources

Danfoss EV220B Solenoid Valve [pdf] Installation Guide EV220B 6, EV220B 22, EV220B Solenoid Valve, Solenoid Valve, Valve

References

• User Manual