Danfoss ECA-XM 210A I/O Module
Product Information
Specifications
- Model: ECA-XM 210A
- Inputs: 7 Analog Inputs (AI), 2 Analog Outputs (AO), 3 Digital
Outputs (DO), 2 Pulse Inputs, M-Bus - Signal Types: Pt 1000, 0-5 V, 0-10 V
Product Usage Instructions
Signal Types and Functions
- AKS 32R -1 – xx bar SP – Comfort / reduced temperature
- AKS 32 -1 – xx bar – Ext. switch closed / open
- AO – 0-10 V signal for ON/OFF control
- DO – Digital Outputs for various functions
- Pulse – Input for flow or energy reading (5 or 24 V)
- M-Bus – Communication protocol for metering
Terminal Assignments
| Point | Terminal |
|---|---|
| AI 1 | 3-4 |
| AI 2 | 5-6 |
Instructions
-20 °C < tamb < 55 °C
0 °F < tamb < 130 °F
0-95% RH, non condensing
IP 10 / VBG4
- AI x 7
- AO x 2
- DO x 3
- Pulse x 2
- M-Bus
Point
- Terminal 1: SP 24 V a.c. (supply)
- Terminal 2: SN 24 V a.c. (supply)
- Terminal 17: 12 V
- Terminal 18: 5 V
- Terminals 19, 20: (shield)
VI.KM.C2.00 © Danfoss 05/2006
Frequently Asked Questions
- Q: What is the power supply requirement for the ECA-XM 210A module?
A: The module requires a SP 24 V a.c. supply and a SN 24 V a.c. supply. - Q: What signal types can be used with the ECA-XM 210A module?
A: The module supports Pt 1000, 0-5 V, and 0-10 V signal types for various functions.
Documents / Resources
 |
Danfoss ECA-XM 210A I/O Module [pdf] Instructions 087R9763, 087R9763, ECA-XM 210A I O Module, ECA-XM 210A, I O Module, Module |
