Danfoss 5000/6000 Relay Card
Warning!
Electronic components within the VLT are susceptible to Electrostatic Discharge – ESD. Make sure that the option card remains in the ESD protective bag at all times during transportation and storage. Before you take the card out of the protective back for mounting, make sure that you are properly connected to common ground, for example by means of a groundconnected wristband, and that the same applies to the VLT. When the option card is out of the protective bag, you should only touch the rim, and never touch the electronic components, as they may suffer irreparable damage.
Bookstyle
- VLT® 6002-6005, 200/240 V
- VLT® 5001-5006, 200/240 V
- VLT® 6002-6011, 380/460 V
- VLT® 5001-5011, 380/500 V
Compact IP 20
- VLT® 6002-6005, 200/240 V VLT® 5001-5006, 200/240 V VLT® 6002-6011, 380/460 V VLT® 5001-5011, 380/500 V
Compact IP 20
VLT®6006-6032, 200/240 V VLT® 5008-5027, 200/240 V VLT®6016-6032, 380/460 V VLT® 5016-5052, 380/500 V
Compact IP 54
- VLT®6002-6005, 200/240 V VLT® 5001-5006, 200/240 V VLT® 6002-6011, 380/460 V VLT® 5001-5011, 380/500 V
Compact IP 54
VLT® 6006-6032, 200/240 V VLT® 5008-5027, 200/240 V VLT® 6016-6062, 380/460 V VLT® 5016-5052, 380/500 V
MI.60.J2.52 – VLT is a registered Danfoss trademark
Documents / Resources
 |
Danfoss 5000/6000 Relay Card [pdf] Instructions 175Z2500, 175Z7803, 50006000 Relay Card, 50006000, Relay Card, Card |