Danfoss logoDanfoss 088N2109 01 Zigbee RepeaterInstallation Guide
Zigbee Repeater

PlacementDanfoss 088N2109 01 Zigbee Repeater - figure 1

Installation

Danfoss 088N2109 01 Zigbee Repeater - figure 2

Ready for inclusion   Danfoss 088N2109 01 Zigbee Repeater - icon 1 Danfoss 088N2109 01 Zigbee Repeater - icon 2

Including Repeater to Zigbee network

2.1. <Zigbee 3.0Danfoss 088N2109 01 Zigbee Repeater - figure 32.2. Zigbee 3.0Danfoss 088N2109 01 Zigbee Repeater - figure 4

Ping Test – from Zigbee Repeater

Danfoss 088N2109 01 Zigbee Repeater - figure 5

LED Blinking patterns

Identify – from AppDanfoss 088N2109 01 Zigbee Repeater - icon 3
Lost connection to Zigbee network Danfoss 088N2109 01 Zigbee Repeater - icon 4

Factory reset (Zigbee Repeater)

Danfoss 088N2109 01 Zigbee Repeater - figure 6UK Product Security and Telecommunications Infrastructure (UK PSTI) statement
For the product covered by this instruction, including relevant software, Danfoss declares that, to the best of our knowledge, the product and related software complies with the requirements stated in the UK PSTI Act and Regulation, provided that the product is used in accordance with our instructions.

If you report a security vulnerability you will receive an acknowledgment of the receipt of the security issue reported and the option for status updates until the resolution of the reported security issue.

Simplified Declaration of Conformity

Hereby, Danfoss A/S declares that the radio equipment type Zigbee Repeater is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet adress: EU DECLARATION OF CONFORMITY

Danfoss A/S
Climate Solutions danfoss.com +45 7488 2222
Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or
function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.

Danfoss 088N2109 01 Zigbee Repeater - logo 1Danfoss
 Climate Solutions | 2024.10
AN33005206123801-010202/088N2109 01

Documents / Resources

Danfoss 088N2109 01 Zigbee Repeater [pdf] Installation Guide
088N2109 01, 088N2109 01 Zigbee Repeater, Zigbee Repeater, Repeater

References

Leave a comment

Your email address will not be published. Required fields are marked *