Danfoss 088N2108 Zigbee Module Icon Master Controller
Product Usage Instructions
Before installation, ensure proper placement of the Zigbee module for optimal performance.
- Follow the installation instructions provided in the manual for your respective language.
- Mount the Zigbee module securely in the designated area.
- Connect the module to the Danfoss IconTM Master Controller.
- Ensure your Zigbee network is active and within range.
- Follow the steps outlined in the manual to include the module in the Zigbee network.
- Wait for LED blinking patterns to confirm the successful connection.
- Follow the firmware update process carefully to ensure proper functioning of the system:
- Do not disconnect power during firmware updates.
- Refer to the Danfoss IconTM 24V Master Controller installation guide for detailed instructions.
FAQ
- Q: Does the IconTM Master Controller support the Zigbee module?
- A: No, the IconTM Master Controller does not support the Zigbee module as indicated in the manual.
- Q: How can I confirm a successful connection to the Zigbee network?
- A: Look for specific LED blinking patterns on the module, which indicate a successful connection.
- Q: What should I do if I lose connection to the Zigbee network?
- A: Refer to the manual for troubleshooting steps when experiencing a lost connection to the Zigbee network.
Placement
Installation
- Ready for inclusion
- Icon™ Master Controller does not support the Zigbee module
Including module to Zigbee network
<Zigbee 3.0
Zigbee 3.0
Ping Test – from Zigbee module
LED Blinking patterns
- Identify – from App
- Lost connection to Zigbee network
- Updating the Master Controller firmware
Update in progress – Do not disconnect while updating.
Please refer to the Danfoss Icon™ 24V Master Controller installation guide for more information.
Factory reset Zigbee module
UK Product Security and Telecommunications Infrastructure (UK PSTI) statement
For the product covered by this instruction, including relevant software, Danfoss declares that, to the best of our knowledge, the product and related software comply with the requirements stated in the UK PSTI Act and Regulation, provided that the product is used under our instructions.
- No universal default passwords.
- The security update period for this product is Invoice date + 2 years.
- If a security vulnerability is identified with the product, this can be reported by following this link: https://www.danfoss.com/en/service-and-support/report-security-vulnerability/
If you report a security vulnerability you will receive an acknowledgment of the receipt of the security issue reported and the option for status updates until the resolution of the reported security issue.
Simplified EU Declaration of Conformity
- Hereby, Danfoss A/S declares that the radio equipment type Zigbee Module complies with Directive 2014/53/EU.
- The full text of the EU Declaration of Conformity is available at the following internet address: EU DECLARATION OF CONFORMITY
CONTACT
Danfoss A/S
- Climate Solutions
- danfoss.com
- +45 7488 2222
Any information, including, but not limited to information on the selection of the product, its application or use, product design, weight, dimensions, capacity, or any other technical data in product manuals, catalog descriptions, advertisements, etc., and whether made available in writing, orally, electronically, online or via download, shall be considered informative and is only binding if and to the Dantos reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that suctalierations cannes made without changes to the form, it or All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
Documents / Resources
 |
Danfoss 088N2108 Zigbee Module Icon Master Controller [pdf] Installation Guide 088N2108 Zigbee Module Icon Master Controller, 088N2108, Zigbee Module Icon Master Controller, Module Icon Master Controller, Icon Master Controller, Master Controller, Controller |