DALI Zigbee3.0 Constant Current LED Driver
Zigbee3.0 Constant Current LED Driver
| Model No. | PB-12A-H(WZS), PB-12A-L(WZS) |
|---|
Features
- Tuya APP cloud control
- Support brightness adjust
- Delay turn on/off
- Timer run
- Scene edit
- Sleep wake-up
- Biorhythms function
Technical Parameters
| Digital Dimming | ON |
|---|---|
| Over-heat Protection | Yes |
| Multiple Current | 123 |
| Over Load Protection | Yes |
| Short Circuit Protection | Yes |
| Warranty | 5 years |
Applications
Suitable for downlight, spotlight and decorative applications.Office / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health care, Retail and Display. Use for retrofit upgrades & new luminaire designs.
Model No.: PB-12A-H(WZS),PB-12A-L(WZS
Features
- Tuya APP cloud control, support brightness adjust, delay turn on/off, timer run, scene edit, sleep wake-up and biorhythms function
- Philips HUE APP control by connect with Philips HUE bridge
- Voice control, support Alexa, Google, Amazon ECHO and TmallGenie smart speaker
- Can relay and route to each other, up to 15 hops
- Match with Zigbee 3.0 remote or scene panel control optional
- RESET button for clearing network connection
- Universal AC input / Full range
- Flicker – Free
- 1 channel constant current output, configurable current via DIP switch
- Synchronize on multiple number of LED drivers
- Over-heat / Over-load / Short circuit protection, recover automatically
- Full protective plastic case
- Suitable for indoor LED lighting application
- 5 Year, 50,000hr warranty
Mechanical Structures and Installations
Technical Parameters
| Model | PB-12A-H(WZS) | PB-12A-L(WZS) | |
|
Output |
Output Voltage | 3-24VDC | 9-45VDC |
| Max Output Voltage | 33VDC | 48VDC | |
| Output Current | 350-700mA | 100-450mA | |
| Output Power | Max. 12W | ||
| Dimming Range | 0～100％, dimming depth:0.5% | ||
| PWM Frequency | 4000Hz | ||
| Current Accuracy | ±5％ | ||
| Ripple & Noise | < 100mV | ||
|
Input |
Input Voltage Range | 100～240VAC | |
| Frequency Range | 50/60Hz | ||
| Effciency | >79%/230VAC | >80%/230VAC | |
| Alternating Current | 0.3A/115VAC, 0.15A/230VAC | ||
| Anti Surge | L-N:1KV | ||
| Inrush Current | Cold start 27A at 230VAC | ||
| Leakage Current | < 0.5mA/230VAC | ||
| No Load Power | < 2W | ||
| Protection | Over Load Power | Hiccup,recovers automatically affer fault condition is removed | |
| Short Circuit | Hiccup,recovers automatically affer fault condition is removed | ||
|
Environment |
Woking Temperature | -20℃～50℃ | |
| T-case Max | 80℃ | ||
| Working Humidity | 20％～90％RH, non-condensing | ||
| Storage Temp/Humidity | -40℃～80℃, 10％～95％RH | ||
| Temperature Coeffcient | ±0.03％/℃ (0-50％) | ||
| Vibration Resistance | 10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min | ||
| IP Rating | IP20 | ||
|
Safety&EMC |
Security Specifcations | IEC/EN61347-1, IEC/EN61347-2-13 | |
| Withstand Voltage | I/P-O/P: 3750VAC | ||
| Insulation Resistance | I/P-O/P: 100MΩ/500VDC/25℃/70％RH | ||
| EMC Emission | EN61000-3-2 Class C, IEC61000-3-2 | ||
| EMC Immunity | EN61000-4-2.3.4.5.6.8.11, EN61347 | ||
| Certications | CE | ||
LED Current Selection: 
Applications
- Suitable for downlight, spotlight and decorative applications.
- Ofce / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health care, Retail and Display.
- Use for retrot upgrades & new luminaire designs.
Note:
- The above distance is measured in spacious (no obstacle) environment, Please refer to the actual test distance before installation.
- Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network.
- Please keep the distance between LED driver and router close, and check the WiFi signals.
- Users must use the Tuya ZigBee gateway to realize remote control and voice control (The smart panel integrate Zigbee gateway function).
App Operating Instructions
- Network pairing
- Download the Tuya APP and register an account, search and add the Tuya Zigbee gateway device.
- Quickly press the “RESET” button five times or repeat power on and off five times to clear the previous network connection, enter pairing mode with the output light breathes blinking.
- Under the gateway, search and add new device. If the network connection is successful, you can find ZBS-DIM devices in Tuya APP.
- Lighting control settings
- After pairing the light device, click the device and change brightness by touch brightness slide.
- After pairing the light device, click the device and change brightness by touch brightness slide.
Guangzhou Skyacne Co.,Ltd
www.iskydance.cn
Documents / Resources
 |
DALI Zigbee3.0 Constant Current LED Driver [pdf] Instruction Manual PB-12A-H WZS, PB-12A-L WZS, Zigbee3.0 Constant Current LED Driver, Zigbee3.0, Zigbee3.0 Current LED Driver, Constant Current LED Driver, Current LED Driver, Current Driver, LED Driver |
