CZUR TouchBoard V2 Wireless Bluetooth Touchpad Keyboard
How to Use the TouchBoard
- TouchBoard acts as a wireless controller for the StarryHub.
- You can operate StarryHub with the TouchBoard easily.
- Before using the TouchBoard, please turn the power button (on the back of the TouchBoard) to ON status.
- Put the TouchBoard back to the charging dock (on the top of StarryHub) after each use.
- Pair the TouchBoard with the StarryHub
- TouchBoard and the StarryHub are paired by factory default.
If you need to pair them again, please do as following steps
- Power on StarryHub and the TouchBoard.
- Long press
on the upper left corner for 3 seconds until the LED indicator blinks in blue colour.
- Put the TouchBoard back into the charging dock, and wait for 10 seconds until the icons on the first row of the TouchBoard light up. Pairing is completed.
Touch Panel / Keyboard
- Tap on Touch/Board to switch input method (touch panel or keyboard).
Volume adjustment
- Tap on V- V+ to adjust the volume of the StarryHub.
Auto-focus
- Tap on
to focus the projector lens automatically. Long press to use manual focus.
Switch signal source
- Tap on
to switch between Starry OS main system, - HDMl, and wireless screen projection signal sources.
Home
- Tap on
and back to the home page, and long press for the APP selector.
Back
- Tap to get back to the previous page or previous operation.
Finger touch
- In Touch mode, regular operations such as “Slide”, “Click/Touch with 1 finger”, “Slide with 2 fingers” and “Zoom in & out with 2 fingers” are supported.
- Slide with ONE finger or Double click with ONE finger and slide: To move object.
- Tab with two fingers Call out more options = right-click on a computer mouse.
- Slide vertically with three fingers: To switch between APPs.
- Slide left/right with three fingers Switch applications.
- Tab Shift + Space bar at the same time to switch keyboard input language.
- [Fn], [OPT], [CMD] can work on Windows and MacOS, but are NOT available on StarryOS.
Keyboard
- In Board mode, the keyboard will light up so you can use the TouchBoard as an input method.
Low Battery Status
- “Low Battery” alert appears with the upper left indicator light flashing red when the Touchboard battery is under 20%. Please put the TouchBoard back into the charging dock (the 3 pins on the top of StarryHub) to recharge.
Touchpad standby and sleep
- Touchpad standby: Touch mode has no operation for 1 minute then will enter standby mode automatically. Keyboard mode without operation for 1 minute, will enter touch mode; Touch mode for 1 minute without operation, will enter standby mode.
- Standby definition: After entering the standby mode, the power indicator lights up slightly, and the backlight lights in the functional area and keyboard area are off.
- Touchpad enters standby wake-up mode: Use any key to wake up the touchpad.
- Touchpad Sleep: Bluetooth connected for 24 hours without any operation, will enter sleep mode automatically. Bluetooth is not connected for 30 minutes without any operation and will enter sleep automatically.
- Sleep definition: All indicator lights are off, and the device enters deep sleep.
- The touchpad enters sleep mode, and the wake-up method is: Place the touchpad in the charging area of the projector, and the touchpad will automatically wake up, or turn off the power switch and then turn it on again.
Documents / Resources
 |
CZUR TouchBoard V2 Wireless Bluetooth Touchpad Keyboard [pdf] User Manual TouchBoard V2, TouchBoard V2 Wireless Bluetooth Touchpad Keyboard, Wireless Bluetooth Touchpad Keyboard, Bluetooth Touchpad Keyboard, Touchpad Keyboard, Keyboard |