It is recommended to wear the device on your bicep or forearm
skin of either hand. Fasten the strap snugly and adjust it to stay
in place during activity. Find the best position and length of the
strap for accurate data. Ensure it fits snugly on your skin for
proper operation.

2. Checking Battery Level

While in shutdown state, tap the button to check the battery
level indicated by the colors green, orange, and red corresponding
to different percentages.

3. Powering On

Before powering on, ensure you have worn the heart rate monitor.
Press and hold the button to turn it on. The indicator light will
flash red and green alternately for about 5 seconds as it analyzes
and calculates the current heart rate. It will then continue normal
operation with the indicator light flashing according to heart rate
values.

4. Shutdown

The heart rate monitor will automatically shut down after being
removed from the skin and left idle for 5 minutes. Alternatively,
you can turn it off by briefly pressing the button.

5. Charging

Use the magnetic charging interface for charging. The indicator
light will flash slowly in red during charging and remain green
when fully charged. Avoid metal objects during charging and unplug
after charging.

FAQ

Q: Can the heart rate monitor be worn during cold weather?

A: In cold environments, reduced blood flow may affect accuracy.
It is recommended to wear the monitor under warm clothing and warm
up before use.

Q: How should I clean the sensor of the heart rate
monitor?

A: Sweat or debris may interfere with the sensor. Wipe and
reposition the monitor if needed for optimal performance.

Q: What should I do if the sensor is obstructed by tattoos or
excessive hair?

A: Tattoos, scars, dark skin, or excessive hair may obstruct the
sensor, affecting data accuracy. Ensure the sensor area is clear
for accurate readings.

“`

View Fullscreen

Heart Rate Monitor H1 User manual
H1
After sale email: steven@cycplus.com
Model: H1 V03

Getting Sta ed Guide

1 Wearing It is recommended to wear the device on your bicep or forearm skin of either hands. Fasten the strap and adjust it to t snugly and stay in place during activity. Adjust to nd the best position and length of the strap for more accurate data. Note: Fit it snugly on your skin for proper operation.
2 Check batte level
While in shutdown state, tap the button, and the indicator will light up for 2 seconds to indicate the batte level.

Green Orange Red

100%

50%

3 Power on

20% 0

Before powering on, please ensure that you have worn

the hea rate monitor. To turn it on, press and hold the

button. Upon powering on, the indicator light will ash

red and green alternately for approximately 5 seconds

as it analyzes and calculates the current hea rate.

After this initial phase, it will begin normal operation.

While the hea rate monitor is functioning, the

indicator light will continue ashing at the same

frequency as the hea rate, and its color will change

based on the hea rate value.

Green light: hea rate80 BPM

Orange light: 80 BPM hea rate 140 BPM

Red light: hea rate 140 BPM

4 Shutdown

The hea rate monitor will automatically shut down

after being removed from the skin and left idle for 5

minutes, or you can turn it o by brie y pressing the

button. The indicator light will turn o after shutdown.

5 Charging
The device uses a magnetic charging inte ace, and the indicator light will ashes slowly in red when charging, and the green light will be always on when it is full. Please avoid metal objects while charging, and peel o the plug in time after charging.

Notes
1. The hea rate monitor is not a replacement for medical equipment.
2. In cold environments, reduced blood ow may a ect accuracy. Wear the monitor under warm clothing and warm up before use.
3. Sweat or debris may inte ere with the sensor. Wipe and reposition the monitor if needed.
4. Tattoos, scars, dark skin, or excessive hair may obstruct the sensor, a ecting data accuracy.
Speci cations
Size: 43 × 44 × 12 mm Weight: 13g Water-proof: IPX6 Operating temperature: -10 to 60 Batte : 3.7 V 90 mAh Charging mode: 5V magnetic Charging time: 30 min Batte life: Up to 110 h (Depends on environmental and personal factors) Wireless protocol: ANT+, BLE
Packing List
Hea rate monitor Strap Charging cable Manual
Manufacturer Information
Company: Chengdu Chendian Intelligent Technology Co., Ltd. Address: No. 88, Tianchen Road, Chengdu, Sichuan, China Warranty: Free repair or replacement within 2 years for non-user-induced damage. Contact: steven@cycplus.com
02

Installation of strap
1
2
4
3
Product Optimization Notice
To continuously improve product functionality and user experience, we may make adjustments to the design, features, or accessories of the product. The actual item you receive may di er from the description in this manual. Please refer to the physical product as the nal reference. We rese e the right to modify products without prior notice. Thank you for your understanding and suppo !
03

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents / Resources

CYCPLUS H1 Heart Rate Monitor [pdf] User Manual
H1 V03, H1 Heart Rate Monitor, H1, Heart Rate Monitor, Rate Monitor, Monitor

References

User Manual

CYCPLUS H1 Heart Rate Monitor User Manual

H1 Heart Rate Monitor

Product Information

Specifications

Product Usage Instructions

1. Wearing the Heart Rate Monitor