CSS GR 15-series
Health Smart Ring
(Common to all series product manuals)
CSSGR15 Series Health Smart Ring
This product has been certified by multiple international professional organizations such as FCC, CE, RoHS, SRRC, etc. It meets dozens of international testing standards, and the data has authenticity and validity, with an accuracy of over 95%. Please use it with confidence.
- Connect the charging cable to the ring.
- Search and download [ H WEAR PRO ] App.
- Open the App and pair your ring.
(Please do not pair directly in the Bluetooth list in Phone Settings.)
- When unpairing, please select ‘Forget This Device’ in the Bluetooth list in Phone Settings.
First startup
When using it for the first time, connect the ring to the magnetic charging cable, the charging light will light up, and it can be turned on.
Full charge duration: about one hour
Full charge available time: 2-5 days
Download App:
Scan the QR code above to open the interface, select iOS/Android, and then download using a mobile browser.
Android users can also search for [H Wear Pro] in the App Store, Google Play, and major mobile app stores for download, while iPhone users can search for [H Wear Pro] in the App Store.
Explanation: Please allow the app to access Bluetooth and location permissions. Some Android phones may require GPS to be enabled to search for the Bluetooth name of the ring.
APP internal connection
Open the “H wear pro” app to fill in personal information and bind it to the app device.
Mobile Bluetooth list forget devices
- In the Bluetooth options of the phone settings, find the ring, press the “i” button at the back, and select “forget this device”;
- Search for the ring in the app again, and once found, bind it.
Status Indicator
- Bluetooth connection: successful connection, blue light flashing;
- Bluetooth disconnection: green light flashing;
- Health monitoring: When connected normally, the APP tests the heart rate and the green light flashes; APP testing blood oxygen, red light flashing; APP tests blood pressure, green light flashes; The APP tests human body temperature and environmental temperature, and the green light flashes; The APP tests heart rate variability and the green light remains on; App testing pressure, green light flashing.
- Low battery: Red light flashing;
- Charging: The red light remains on during charging, and the green light remains on when fully charged; If it is connected and fully charged, the green light will remain on and the blue light will flash. If it is disconnected and fully charged, only the green light will remain on.
Wearing a ring
Please wear the ring on your suitable finger, choosing a comfortable size that is neither loose nor tight.
It is recommended to wear it on the index finger, middle finger, and ring finger of non dominant hands for better data detection.
Attention: Wearing too loose can affect the collection of heart rate and blood oxygen data.
Charge
Use magnetic charging wires to charge the ring.
Operational Definition
The ring has no touch or buttons; App initiates motion and functional testing.
Main Function Introduction
Heart rate monitoring: supported
Blood oxygen monitoring: support
Blood pressure monitoring: support
Sleep monitoring: supported
Step count information: supported
Calories: Supported
Heart rate variability monitoring: support
Pressure monitoring: support
Temperature monitoring: supports monitoring of human
body temperature and environmental temperature
Female Physiological Cycle Monitoring: Support
FAQ
Can't see the ring, can't see the ring in the Bluetooth list?
(1) First, check if other phones are connecting to this ring. (2) If the ring is not connected, you can open your phone - Settings - Bluetooth, turn off Bluetooth, and then turn on Bluetooth again. Then check the Bluetooth list to see if you can see the ring. (3) If you haven't seen the ring yet, you can charge it for 10 minutes. Then check if there is a ring in the Bluetooth list. (4) If you haven't seen the ring yet, proceed with charging and unplugging. Quickly plug and unplug three times within 5 seconds, and see the red and green lights repeatedly light up three times.
Product parameters
Product model: CSS R-series
Battery type: Rechargeable polymer lithium electronic battery
Battery capacity: 13mAh to 25mAh
Charging specification: 5V ⎓ 100mA (min)
Ring weight: 4.7g-6.5g
Bluetooth: BLE5.1
Waterproof grade: IP68
Device requirement: Only supports pairing Android 5.0 or iOS 10.0 and above devices
Charging interface: magnetic charger
Documents / Resources
 |
CSS CSSGR15 Series Health Smart Ring [pdf] User Guide CSSGR15 Series, CSSGR15 Series Health Smart Ring, Health Smart Ring, Smart Ring, Ring |