Crystal WMD104 Surface Agitator
Function
The WMD104 combination water surface agitator is designed to be flush mounted in diving pools to agitate the water surface increasing visibility during diving. These nozzles can accommodate all gutter configurations from parapet to deck level. Interchangeable face plates are provided. The stream jet produce a1/2″ (13mm) column spray (45°) that will strongly agitate the surface of water, while the Crown jet (15°) produces a gentler softer agitation.
Specification
- Construction shall be machined cast bronze/brass. Face plates shall be removable for nozzle alignment or nozzle cleaning by using a security key. Water inlet connection shall be 1 inch diameter (25mm) (standard 1″ n.p.t.).
Requires fine screening at pump, suction strainer openings maximum 0.040″ (1 mm).
Options
Bronze winter cover, order separately by part no. WMF081
Overview
Wall Mount Application
Stream Effect
Crown Effect
Deck Mount Application
Stream Effect
Crown Effect
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF CRYSTAL FOUNTAINS INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF CRYSTAL FOUNTAINS INC. IS PROHIBITED
Documents / Resources
 |
Crystal WMD104 Surface Agitator [pdf] Owner's Manual WMD104, WMD104 Surface Agitator, Surface Agitator, Agitator |
