CLS-DMX-WALL01 DMX Wall Mount Zone Controller
“
Specifications
- Brand: DMX Wall Mount Zone Controller
- Model: CLS-DMX-WALL01
- Input Voltage: 12 – 24VDC
- Constant Voltage Output Signal: DMX512
Product Usage Instructions
Safety & Warnings
- Install in accordance with national and local electrical code
regulations. - This product is intended to be installed and serviced by a
qualified, licensed electrician. - DO NOT connect directly to high voltage power. Install with a
compatible Class 2 constant voltage LED driver (power supply). - Only install compatible 24VDC constant voltage luminaires.
- This product is rated for indoor installation and is not
protected against moisture. - Do not modify the product beyond instructions or warranty will
be void.
Installation
- Turn power off at circuit breaker.
- SHOCK HAZARD! May result in serious injury or
death. Turn power OFF at circuit breaker prior to
installation.
Product Functionality
- Power Indicator: Red indicates unit is OFF.
Blue indicates unit is ON. Blue flash indicates DATA is
transmitting. - Color Wheel: Adjust RGB color mixing.
- Power: Short press to turn ALL zones and
channels ON/OFF. - RGB Brightness: Long press to adjust
brightness of RGB colors simultaneously (7 steps of brightness).
Adjust W (4CH) channel separately to adjust tone. - R, G, B, W Channel Adjustment: Short press to
turn channel ON/OFF. Long press to adjust brightness. - RGB ‘White’ Presets: Short press for 3 types
of ‘White’ RGB presets: warm white, neutral white, cool white.
Useful for applications that don’t utilize W (CH4) for RGBW
applications. - Dynamic Mode Zone Control: Short press to
control zones 1, 2, or 3. Long press to turn individual zone
ON/OFF. Short press changes mode/pauses mode. Long press adjusts
speed of dynamic mode. See ‘Dynamic Mode Chart’ for mode
descriptions.
FAQ
Q: Can I install this product myself?
A: No, installation and maintenance must be performed by a
qualified electrician.
Q: What tools are required for installation?
A: Phillips-head screwdriver, flat-head screwdriver, mini
flat-head screwdriver, wire stripper.
Q: What is the input voltage range for this product?
A: The input voltage range is 12 – 24VDC.
“`
IL52493623EN
Brand Logo
reversed out of
blacIkNS #
iO
DMX Wall Mount Zone Controller CLS-DMX-WALL01
WARNING
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product must be performed by a qualified electrician. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Risk of Personal Injury- Fixture not intended to be installed in a gymnasium or other space where impacts from objects can occur. Failure to comply with these instructions may result in death, serious bodily injury and property damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product. IMPORTANT: Read carefully before installing fixture. Retain for future reference. NOTICE: Green ground screw provided in proper location. Do not relocate. NOTICE: Fixture may become damaged and/or unstable if not installed properly. Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
QUICK SPECS / MODELS CLS-DMX-WALL01
TOOLS FOR INSTALL
Phillips-head screwdriver
Flat-head screwdriver
Input Voltage: 12 – 24VDC Constant Voltage Output Signal: DMX512
1 2 3
Mini flat-head screwdriver
Wire stripper
Installation Instructions – DMX Wall Mount Zone Controller
SAFETY & WARNINGS
1. Install in accordance with national and local electrical code regulations.
2. This product is intended to be installed and serviced by a qualified, licensed electrician.
3. DO NOT connect directly to high voltage power. Install with a compatible Class 2 constant voltage LED driver (power supply).
4. Only install compatible 24VDC constant voltage luminaires. 5. This product is rated for indoor installation and is not protected
against moisture. 6. Do not modify product beyond instructions or warranty will be
void.
INSTALLATION
1. Turn power off at circuit breaker
SHOCK HAZARD! May result in serious injury or death. Turn power OFF at circuit breaker prior to installation.
Power Indicator
Red indicates unit is OFF.
Blue indicates unit is ON.
Blue flash indicates DATA is transmitting.
Color Wheel: Adjust RGB color mixing.
Power: Short press to turn ALL zones and channels ON/OFF.
RGB Brightness
Long press to adjust brightness of RGB colors simultaneously (7 steps of brightness). Adjust W (4CH) channel seperately to adjust tone.
R, G, B, W Channel Adjustment
Short press to turn channel ON/OFF. Long press to adjust brightness.
RGB `White’ Presets
Short press for 3 types
of `White’ RGB presets:
warm white, neutral white,
cool white. Useful for
applications that don’t
utilize W (CH4) for RGBW
1
2
3 applications.
Dynamic Mode
Zone Control
Short press to conrtol zones 1, 2, or 3. Long press to turn individual zone ON/OFF.
Short press changes mode/ pauses mode. Long press adjusts speed of dynamic mode. See `Dynamic Mode Chart’ for mode descriptions.
Wiring connections
WARNING: DO NOT connect directly to 120VAC. See `System Architecture’ for a general system design.
This wall station will only operate at low voltage (12-24 V LED driver output).
2. Determine location to install components
See SYSTEM DIAGRAM for more information. DMX Decoders are only utilized to control Non-DMX type luminaires.
LED Driver(s)
1 2 3
Controller DMX Decoder
Luminaire
Mounting
3. Connect components
Only use copper wiring. Reference WIRING CONNECTIONS and SYSTEM ARCHITECTURE further in this guide for visuals.
4. Turn power on at circuit breaker
Pop off faceplate with a flathead screwdriver.
If system remains unresponsive or is working improperly, turn OFF main power at breaker and verify all connections.
2
Cooper Lighting Solutions Installation instructions
Mount to a standard switchbox.
Installation Instructions – DMX Wall Mount Zone Controller
Setting DMX address
Each DMX decoder or DMX luminaire needs to be addressed correctly so the controller can distinguish between each decoder. To pair a DMX decoder or luminaire to a specific zone of the controller (1-3), set each decoder/luminaire to one of the following addresses: · Zone 1: Set to address `001′ (will be fixed to address 001 004) · Zone 2: Set to address `005′ (will be fixed to address 005 008) · Zone 3: Set to address `009′ (will be fixed to address 009 012)
Each zone of the controller is fixed with 4 DMX addresses to control the 4 channels:
CH1 Red, CH2 Green, CH3 Blue, CH4 White or X.
Once DMX address is set on luminaire or DMX decoder, ensure to Press Zone 1, 2, or 3 on the controller to control desired zone.
Example of DMX Addressing Display
Dynamic mode chart
The Dynamic Mode tool plays factory-programmed scenes. Choose up to 10 different scenes. Short press switches/pauses the mode. Long press adjusts speed of the dynamic mode.
Mode 1 2 3
4 5 6 7 8 9 10
11
Description Fade 1 – B M R O Y G C Fade 2 – B G O W C M B Fade 3 – R W C G C W B W
Skip 1 – R Y W C G W B M W Y RGB Fade In/Out RGB Fade In RGB Fade Out RGB Skip Fade 4 – B M O G C Fade 5 – W Y W M C W G W M C
All Channels Off
Digital Display
Pinout connection guide
The following diagrams/tables indicate the appropriate connections for patching your own shielded CAT5/RJ45, and XLR-3 splice cables. These diagrams are for general reference and may slightly differ between different cable manufacturers.
12 34 56 78
Pin Wire Color No.
Function
1
White/Orange Data +
2
Orange
Data –
3
White/Green None
4
Blue
None
5
White/Blue
None
6
Green
None
7
White/Brown May be used as
2nd ground
8
Brown
Ground
Pin No. Function
1
Ground
2
Data –
3
Data +
3
Cooper Lighting Solutions Installation instructions
Installation Instructions – DMX Wall Mount Zone Controller
System Architecture
The following diagram is provided as an example system design. Shielded CAT5 (RJ45 connections) data cables are the most cost-effective solution for transmitting DMX-512 signals. XLR-3 cables may also be installed but require an additional adapter for connecting to DMX decoders. Always review each component installation guide for detailed and up-to-date wiring instructions. Install in accordance with NEC and local regulations.
Install applicable wire gauge / type Input Output
DMX Controller DInMstXalWledallinCWonatlrl oBlolexr
L N
AC Power 50/60Hz
Class 2 12-24VDC Driver** Installed in Junction Box
L V+
N
G*
V-
DMX Data Output
G
V+
+
–
V –
1 2 3
V- V+
CAT5 / EthWerinrientgCapbrolev(iRdJe4d5bCyoonntheectrisons)
V+ VData IN
Data OUT
0-5 0-9 0-9
V+ CH1 – R CH2 – G CH3 – B CH4 – W
DMX Decoder
V+ V+ CH1 R
CH2 G CH3 B
MMG RGBW
RJ45 Splice Cable Wiring Connections
Brown Ground White/Orange Data + Orange Data –
White/Brown wire may be used as an additional ground.
V- V+
V+ V+
CH1 R
V+
V+
V-
CH1 – R
Data IN Data OUT
0-5 0-9 0-9
CH2 – G CH3 – B CH4 – W
DMX Decoder
CH2 G CH3 B CH4 W
MMG RGBW
* Driver may not require a fault ground connection. Refer to driver specifications for additional information.
** Install a compatible Class 2 constant voltage driver. Refer to driver specifications for a compatible junction box.
See luminaire specifications for maximum series run limits.
Troubleshooting
For thorough troubleshooting of LED strip light and luminaires, see LED luminaire installation guides.
LED luminaires not responding to touch
1. Ensure the blue indicator light is on by pressing `Power.’ A red indicator signifies the device is off. The blue indicator light will blink rapidly when pressing/holding any key on the touch pad.
2. Ensure the appropriate zone number was pressed prior to controlling the DMX decoder/luminaire. For example, if you know the luminaire is addressed to zone 1, press `1′ prior to controlling.
3. Ensure the individual zone has not been turned off. Long pressing zones 1-3 will turn the specific zone ON/OFF. Additionally, long pressing R, G, B, W will increase/decrease individual brightness and short pressing will turn R, G, B, W ON/OFF.
4. Ensure the DMX decoder/luminaire is addressed properly. For example, address `001′ will respond to zone 1 of the controller. See `Setting the DMX Address’ for additional addressing information.
LED luminaire responding incorrectly
Ensure all wiring connections are correct. Reversing the Data + and Data – will cause lights to flicker and not respond to controller.
1. Check power connections of all components (drivers, DMX decoders/luminaires, DMX controller). 2. Check DMX Data connections – See Pinout Connection Guide and System Diagram for RJ45 hard-wiring connections. 3. Check DMX decoder connections See System Diagram for CH 1-4 connections. 4. See CLS-DMX-DECODER – DMX 4-CHANNEL DECODER specification sheet and Installation Instructions for additional information.
4
Cooper Lighting Solutions Installation instructions
Patented USPTO 11,054,091 | D1010,200 | D1011,602 | 9,951,934 | 3017928 | 10,116,127
Warranties and Limitation of Liability
Please refer to www.cooperlighting.com/WarrantyTerms for our terms and conditions.
Garanties et limitation de responsabilité
Veuillez consulter le site www.cooperlighting.com/WarrantyTerms pour obtenir les conditions générales.
Garantías y Limitación de Responsabilidad
Visite www.cooperlighting.com/WarrantyTerms para conocer nuestros términos y condiciones.
FCC Statement · This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Note: The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
Cooper Lighting Solutions 18001 East Colfax Avenue Aurora, CO 80011 P: 800-760-1317 www.cooperlighting.com For service or technical assistance: 1-800-553-3879
Canada Sales 281 Hillmount Rd, Markham, ON L6C 2S3 P: 1-800-863-1354
© 2025 Cooper Lighting Solutions All Rights Reserved.
Product availability, specifications, and compliances are subject to change without notice.
Documents / Resources
 |
COOPER CLS-DMX-WALL01 DMX Wall Mount Zone Controller [pdf] Installation Guide CLS-DMX-WALL01, CLS-DMX-WALL01 DMX Wall Mount Zone Controller, CLS-DMX-WALL01, DMX Wall Mount Zone Controller, Wall Mount Zone Controller, Zone Controller, Controller |