CONEC 17-101814 Socket

INSTALLATION INSTRUCTIONS

Notes:

1. Electrical Specifications:
   1. Meets EIA/TIA-568-B.2 Cat.5e Specification
   2. Contact Resistance: 20mOhm max.
   3. Insulation Resistance: 500MOhm min. @ 100 VDC
   4. Current Rating: 1.2A max. at 25~C
   5. Working Voltage: 100 VDC
   6. DWV: 1000 VDC/60s Contact to Contact, 1500 VDC/60s Contact to Metal Shell
   7. Operating Temperature: -40~C to +85~C
2. Material and Finish:
   1. Receptacle Housing & Protective Cover: Zinc Die-Cast, Finish: Nickel Plated
   2. Ball Chain Assembly: Copper Alloy and Stainless Steel, Nickel Plated
   3. Panel Nut: Brass, Finish: Nickel Plated
   4. Panel Gasket: Silicon, Color: White
   5. Cover Gasket: Silcon, Color: White
   6. RJ45 Jack Metal Shell: Copper Alloy, Nickel Plated
   7. RJ45 Jack Plastic Housing: Glass filled PBT UL94 V-0, Color: Black
   8. RJ45 Jack Contacts: Phosphor Bronze, Finish: 50u” Gold min. over Nickel
3. Connector can be front or rear mounted to a maximum panel thickness of 3.2mm.
4. IP67 rated when covered or fully mated with the appropriate mating connector
5. Recommaned Mounting Panel Nut Torque is 20 to 25 lb-inch

Downloaded from Arrow.com.

Documents / Resources

CONEC 17-101814 Socket [pdf] Instructions 17-101814 Socket, 17-101814, Socket

References

• User Manual