Chuanghongyu V21 Car Dvr Dash Camera

Chuanghongyu V21 Car Dvr Dash Camera

Instructions for use

Thank you for purchasing the appearance of fine high-resolution multi-function onboard recorder. This product uses high-performance chips, High-definition video, dynamic picture of the continuity of strong, under low light, can record video, To achieve high-definition wide-angle shot.

This user manual details how to use, and provide you with detailed information, including the use, Operational and technical specifications, please read the manual carefully and fully understood before using, please keep this manual Book, we hope that this product will meet your needs and long-term service to you!

Product manual

Introduction to main functions of mobile app

  1. Download app

App loading can be performed in two ways:

  1. Go to the app store to download
    For IOS system, you can search “Viidure” in the app store to download:
    Product manual
  2. Scan the QR code for IOS and Android systems, which can be downloaded by scanning the QR code Viidure “APP. The steps are as follows:

Open WeChat or other software with “scan” function to scan

Select the corresponding system of the mobile phone and click to download

QR Code

Registered account

  1. Enter the “Viidure” app for account registration
  2. Fill in the corresponding information as required, obtain the verification code and fill in it. Click registration to complete the operation

Connecting the camera

  1. Enter the mobile phone wifi list (as shown in the figure below), click “CAR-******” to enter the recorder device name, enter the password “12345678”, and the mobile phone is successfully connected to the recorder;
    Connecting the camera
  2. Log in to the downloaded app, “Viidure” enters the main interface, click the camera icon above “CAR-******” to enter the recorder screen;
    Connecting the camera

Parameter setting

Set the parameters of the dash cam, such as modifying the WiFi password, recording or not, and displaying the watermark time, Video cycle time, collision sensitivity, video resolution, etc.
Parameter setting

Parking monitoring

Parking Monitoring

The parking monitoring mode requires a three core step-down wire connection, and ordinary car chargers cannot trigger this function!
Parking monitoring function triggered time setting for time-lapse recording cycle: 6 hours, 12 hours, 24 hours, 48 hours, (set a 6-hour time, and the machine will automatically shut down after continuously recording for 6 hours after triggering the parking monitoring function) Low voltage protection settings: 11.2V, 11.5V, 11.8V (When 11. 2V is set, the machine will automatically shut down when the car battery voltage is lower than 11.2V)

video review and download

video review and download

Product description

Key function description

power key 2 Reset key 3 TF card slot Key function description:

  1. power key On/off function
    In the shutdown state, long press the [power key] for 2 seconds to turn on the power supply of the machine, and the machine will start working automatically.
    Press and hold the [power key] for 2 seconds when the machine is turned on. The machine will automatically save the video file and user settings and shut down.
  2. Reset key
    Press the reset key to reset the machine and restart it when the machine crashes and cannot be switched on or off normally.
  3. Tf card slot
    Used to insert a memory card, [note] please use a high-speed TF Card (class10 or above) with a capacity of no less than 8GB. The TF card can support 128GB at most.

Product Specifications

product name Dash camera, Car Dvr
Features WiFi dash cam
Color custom made
Camera lens High-resolution ultra wide- angle Camera lens
Language English, Japanese, French, Italian, German, Spanish, Thai Russian, Chinese (simplified Traditional), Korean, etc.
file format MOV/MP4
Continuous loop recording  Seamless loop recording, do not leak seconds
Motion detection Support
Year Month Day points Support
Carrier media Built-in memory (total: 64MB)
Camera mode 800W
Photo format JPEG
Storage card TF (recommended more than 10-speed, capacity 8G-128G TF card)
Microphone Support
Built-in audio Support
Infrared night vision Support
Power Interface 5V 1.5A

Troubleshooting

Under normal operating conditions, if the products have problems, please refer to the solution:

  1. Could not take photos, video Check TF card whether there is enough space, whether locked.
  2. When recording, it will automatically stop Because of huge high-definition video data, use SDHC compatible high-speed TF card, high-speed TF card will be C10 identity.
  3. Replay pictures and videos, the “File” prompt An error occurred when TF card memory data, resulting in incomplete files, use the Car DVR “Format” function, reformat the card.
  4. The image is foggy
    Please check the lens for dirt and finger prints. Before shooting, wipe the lens with lens paper.
  5. The recorder does not work. You can press the reset key with a sharp object and then start it again to restore normal.
  6. Open the network access permission for the first time, and open the local photo album
    Troubleshooting
  7. If the mobile phone cannot be connected to the product, first of all, check whether the mobile phone is connected to other WiFi hotspots. The app can only be connected to the recorder when the WiFi in the mobile phone settings is connected to the recorder (for example, at home, it is found that the recorder cannot be connected, so it is necessary to check whether the WiFi signal in the mobile phone settings is connected to the WiFi in the home)
  8. The real-time picture of the mobile phone is stuck, which is generally related to the WiFi signal. For example, when the mobile phone is too far away from the recorder, the WiFi signal is weak, and the real-time picture of the mobile phone will get stuck. In addition, if there are too many WiFi signals around the recorder, it will also interfere with the recorder and cause the real-time picture to jam
  9. The preview speed in the album is very slow. It may be that there are too many video files in the TF card, resulting in the timeout of obtaining file information. Consumers are advised to format TF cards regularly
  10. record appearance many clients connect to it. But only one mobile phone can be used to link at the same time. If it is found that the mobile phone cannot be connected to the recorder, it should be ruled out whether the recorder is connected to other mobile phones
  11. Use the computer to play video recordings:
    The product uses H. 264 compression format The file type is mov or MP4 format. Many Microsoft Windows computers’ built-in playback software bodies (such as Windows Media Player) do not support H. 264 encoding format It may not be able to play, or the playing of the movie is not smooth, the frame is fixed or broken, or the video and audio are not synchronized. It is recommended to download other professional playing software (such as pot player, etc.).

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Documents / Resources

Chuanghongyu V21 Car Dvr Dash Camera [pdf] User Guide
V21, V21 Car Dvr Dash Camera, Car Dvr Dash Camera, Dvr Dash Camera, Dash Camera

References

Leave a comment

Your email address will not be published. Required fields are marked *