CASIO 10B Plus 7L Smart Watch User Manual
CASIO 10B Plus 7L Smart Watch

Reading the display

Reading Display

SU: Sunday, MO: Monday, TU: Tuesday, WE: Wednesday, TH: Thursday, FR: Friday, SA: Saturday (Changeover between 12-hour and 24-hour formats) In regular timekeeping mode, with every push of A, the display is switched between 12-hour and 24-hour formats.

Setting daily alarm

If the daily alarm is set, the buzzer sounds for 20 seconds at the preset time every day until cleared. To stop the buzzer, press the L button. If the time signal is set, the watch sounds every hour on the hour.
(Sound demonstration) Press and hold the A button in alarm mode to sound the buzzer.

[Hour setting] Setting Daily Alarm
Press L in the daily alarm mode to set hour. One hour advances with every push of A.

[Minute setting]
Setting Daily Alarm
Press L to set minute digits.
One minute advances with every push of A. Press L to complete.*

*If the C button is pressed, the watch reverts to the regular timekeeping mode.
(Quick digit advance) When the A button is pressed for more than 2 seconds, the digit advances quickly. When released, the digit advance will stop.

[On or off setting of daily alarm and time signal]

[The alarm-onmark and timesignal-on-mark appear.] [The alarm-onmark and timesignal-on-mark disappear.] [The alarm-on-mark only appears.] [The time-signalon-mark only appears.] Setting Daily Alarm Time Signal

Setting time and calendar

[Regular timekeeping]
Setting Time Calendar
Press Cthree times to change regular timekeeping mode to time/calendar setting mode.

[Second adjusting]
Setting Time Calendar
Press A to adjust seconds.*

[Hour setting]
Setting Time Calendar
Press L to move to the hour setting.
Press Ato increase the number.

[Minute setting]
Setting Time Calendar
Press L to move to the minute setting.
Press Ato increase the number.

*Precise time can be maintained by correcting the seconds once a month on a time signal from a radio, TV, telephone, etc.
(Quick digit advance) When the A button is pressed for more than 2 seconds, the digit advances quickly. When released, the digit advance will stop.

IMPORTANT: Setting sequence MUST BE FOLLOWED when making any new setting.

[Month setting]
Setting Time Calendar
Press L to move to the month setting. Press A to increase the number.

[Date setting]
Setting Time Calendar
Press Lto move to the date setting. Press Ato increase the number.

[Day setting]
Setting Time Calendar
Press L to move to the day setting. Pressing Aadvances to the next day. And press C to complete.

  • Correction of any digit, if not required, can be skipped by pressing the L button repeatedly.
  • If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the regular timekeeping mode automatically.

Stopwatch operation

Stopwatch Operation
A signal confirms start/stop operation.
(Working range) The stopwatch display is limited to 59 minutes 59.99 seconds, for longer times reset and start C again.

(a) Net time measurement

A Icon
Start
A Time loss
Stop

A Icon
Re-start

A Icon
Stop

L
Reset

(b) Split time measurement

A Icon
Start

L Icon
Split

L Icon
Split release

A Icon
Stop

L
Reset

(c) 1st-2nd place times

A Icon
Start

L Icon
Split
The first runner finishes.

A Icon
Stop
The second runner finishes. Record the time of the first runner.

L Icon
Split release
Record the time of the second runner.

L
Reset

Specifications

Accuracy at normal temperature: ±30 seconds a month
Display capacity:

  • Regular timekeeping mode Hour, minute, second, am/pm, date and day
    Calendar system: Auto-calendar set at 28 days for February
  •  Daily alarm mode
  • Hourly time signal function
  • Stopwatch mode
    Measuring capacity: 59 minutes 59.99 seconds
    Measuring unit: 1/100th of a second
    Measuring modes: Normal time, net time, split time and 1st-2nd place times

Battery:
One lithium battery (type: CR-2016-except Module 1271/BR-2020 – Module 1271 only) Approx. 7 years operation on type CR-2016 (except Module 1271) /10 years on type BR-2020 (Module 1271 only). [assuming alarm operation for 20 sec./day and one light operation for 1 sec./day]

NOTE: THERE IS NO WAY unit components can be damaged or malfunction, due to maloperation of buttons. If confusing information appears on the display it means entry sequence was incorrect. Please read the manual and try again.

Company Logo

Documents / Resources

CASIO 10B Plus 7L Smart Watch [pdf] User Manual
10B_7L VerC, MA1211-ED, 10B Plus 7L Smart Watch, 10B Plus 7L, Smart Watch, Watch

References

Leave a comment

Your email address will not be published. Required fields are marked *