SR-CS9041A-R Smart Relay Module
“
Product Information
Specifications:
- Input Voltage: 100-240Vac
- Output Voltage: 100-240Vac
- Max. Load Current: Resistive load: max. 4.3A,
Capacitive/Inductive load: max. 1.7A - Standby Power Consumption: [specifications
missing]
Product Usage Instructions
Function Introduction:
The Casambi Smart Relay Module is designed to control connected
light sources. It can be used with or without a neutral wire.
Wiring Instructions:
1) Wiring with neutral wire:
For wiring with a neutral wire, connect the L terminal to the
live lead, N terminal to the neutral lead, L-out terminal to the
output terminal of the dimmer, and S terminal to the switch.
2) Wiring without neutral wire:
For wiring without a neutral wire, follow the same connections
as above but without the neutral wire.
Accessories:
- Accessory 1: Wire clamp cover (sold separately)
- Accessory 2: Din rail bracket (sold separately)
Frequently Asked Questions (FAQ)
Q: What is the standby power consumption of the Casambi Smart
Relay Module?
A: The standby power consumption information is currently
unavailable in the provided text.
“`
Casambi Smart Relay Module
Important: Read All Instructions Prior to Installation Function introduction
42 mm
Wiring Diagram
Notes for the diagrams: L – terminal for live lead N – terminal for neutral lead L-out – output terminal of the dimmer (controlling connected light source) S – terminal for switch
1) Wiring with neutral wire
2): Wiring without neutral wire
L-out
S
L
N
L-out
S
L
N
L-out
S
L
N
38 mm
L-out
S
L
N
Accessory 1: Wire clamp cover. Need to purchase separately.
16 mm
Accessory 2: din rail bracket. Need to purchase separately.
Product Data
Input Voltage 100-240Vac
Output Voltage 100-240Vac
Max. Load Current
Resistive load: max. 4.3A, Capacitive/Inductive load: max. 1.7A
Standby Power Consumption
<=0.5W
Size(LxWxH) 42x38x16mm
· Casambi in wall smart relay module · Supports resistive loads, capacitive loads or inductive loads · 1 channel relay output, max. load up to 4.3A, 1 channel push button input · Input and Output with Screw Terminals, Safe and Reliable · Enables to control ON/OFF of connected light source · Typical mesh range is over 50 meters line of sight for indoor environment · The relay can be controlled by Casambi app, remotes, wall switches, kinetic switches, the push button input can be configured to control Casambi network wirelessly · Mini Size, Easy to be Installed into a standard size wall box
Safety & Warnings
· DO NOT install with power applied to device. · DO NOT expose the device to moisture.
S
S
Bypass
S
N
N
N
L
L
L
* When using the device without neutral wire, the smart relay requires at least 3W @ 240 VAC of power consumption to operate. If the connected light has a smaller power consumption, then Bypass is needed for the device to work.
Documents / Resources
 |
CASAMBI SR-CS9041A-R Smart Relay Module [pdf] Instruction Manual SR-CS9041A-R Smart Relay Module, SR-CS9041A-R, Smart Relay Module, Relay Module, Module |