Curtain and Netting Set for Dallas Gazebos
Instruction Manual
HOW TO ASSEMBLE
Curtain and Netting Set for Dallas Gazebos
CURTAIN & NETTING SET FOR DALLAS GAZEBOS
Compatible with Palram – Canopia’s Dallas ™ 12×14 / 3.6×4.3 | 12×16 / 3.6×5 | 12×20 / 3.6×6
IMPORTANT!
Please read these instructions carefully before starting assembly.
Keep these instructions in a safe place for future reference.
AFTER SALES SERVICE
PARTS REQUEST
In the case of missing or damaged parts, do not return product to store.
Go to the link below or scan the QR code for help, it will direct you to a form that will help us assist you as soon as possible.
Contact us on our website: bit.ly/3js7yZi
ASSEMBLY ASSISTANCE
If you need any technical assistance in assembling your product, go to the link below or scan the QR code for help. It will direct you to a form that will help us assist you as soon as possible.
Contact us on our website: bit.ly/3kqqFEc
CUSTOMER SUPPORT
WE ARE HERE TO HELP
For general questions: bit.ly/3kY07dP
SAFETY ADVICE
- Dispose of all plastic bags safely— keep them away from children’s reach.
- Keep children away from the assembly area
- When using a stepladder or power tools, make sure that you are following the manufacturer’s safety advice.
IMPORTANT RECOMMENDATIONS
- These instructions are compatible with Palram Canopia’s Dallas”” 12×14 / 3.6×4.3 112×16 / 3.6×5 112×20 / 3.6×6
- Please carry out the steps in the order set out in these instructions.
- Keep these instructions in a safe place for future reference.
BEFORE ASSEMBLY
- This curtain / netting set includes 4 parts that cover the entire gazebo.
- Please read these instructions carefully before you start to assemble this product.
- Some of the steps may require the assistance of a second person.
DURING ASSEMBLY
This icon indicates that the installer should be inside the product.
This icon indicates that the installer should be outside the product.
- When encountering these icons, you are requested to either keep the screws slightly loose or to fully tighten the screws.
TOOLS G EQUIPMENT
IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly, please refer to the relevant assembly step for important additional comments.
Step 1-4: Do not attach hooks in the area marked with an X (see round view).
Step 7-8: Tighten the nuts when the curtain stretched positioned around the post (see view b).
Step 9: In assembling together curtain and netting, there will be excess strips (unused).
- When closed, the curtain / netting has to be stretched in order to properly maintain them.
- When opened, the curtain / netting should be tied to the poles with the built-in straps.
- In windy weather conditions, curtains need be pulled towards the post, as shown in step 10.
Optional: It is possible to thread a curtain weight chain at the bottom. 
Do not attach hooks in the area marked with an X (see round view).
USA
877-627-8476
hobbyservice®poly-tex.com
UNITED KINGDOM • IRELAND
01302-380775
customer.serviceUl.palram.com
Documents / Resources
 |
CANOPIA Curtain and Netting Set for Dallas Gazebos [pdf] Instruction Manual Curtain and Netting Set for Dallas Gazebos, Curtain and Netting Set, Netting Set |
