G600 Series on Mac OS Via WiFi Connection
“
Specifications:
- Product Name: PIXMA G670
- Operating System: Mac OS
- Connection: WiFi
Product Usage Instructions:
Download and Installation Procedure:
- Go to the Canon webpage
and download the printer driver. - Choose and download the G600 series Setup package (Mac).
- Click [Download] on the webpage, then execute the downloaded
file. - Click [Setup].
- Click [Open].
- Press [Next].
- Type in the password of your computer account, then click
[Install Helper]. - Press [Start Setup].
- Click [Next] and wait for the process to complete.
- Click [Yes] and choose to [Agree] or [Do not agree] after
reading.
Wi-Fi Connection:
- Choose [Wi-Fi Connection], then click [Next].
- Click [Next] and wait for the process to complete.
- Click [Next] and then click [Next] again.
- Click [Alternative Methods].
USB Wi-Fi Connection:
- Choose [Set up Wi-Fi connection using a USB cable], then click
[Next]. - Connect the printer and computer with a USB cable and
wait. - Choose the network name from the list, then click [Next].
- Type in the wireless network password, then click [Next].
- Click [Next] and wait for the process to complete.
- Unplug the USB cable, then click [Next] and wait.
- Click [Add Printer].
- Choose [Canon G600 series], then click [Add].
- Click [Next] and then click [Next] again.
- Driver installation is completed, click [Continue online].
FAQ:
Q: What should I do if I encounter an error during
installation?
A: If you encounter an error during installation, please refer
to the troubleshooting section of the user manual or contact Canon
customer support for assistance.
“`
Mac OS PIXMA G670 Installing PIXMA G670 on Mac OS via WiFi connection
The following steps and screens are for reference only, and the actual operation screens may vary depending on the device model, system, or software version. Download and Installation procedure 1.
Go to below Canon webpage and download the printer driver https://hk.canon/en/support/pixma%20g670/model 2. Choose and download below file G600 series Setup package (Mac) 3. Click [Download] in the webpage, and then execute the file after download was completed 4. Setup Click [Setup]
1
5. Click [Open] 6. Press [Next] 2
7. Please type in the password of computer account, then click [Install Helper] 8. Press [Start Setup] 3
9. Click [Next]
10. Please wait
4
11. Click [Yes]
12. Click [Agree] or [Do not agree] after reading
5
13. Please wait
14. Wi-Fi Choose [Wi-Fi Connection], then click [Next]
6
15. Click [Next]
16. Please wait
7
17. Click [Next] 18. Click [Next] 8
19. Click [Alternative Methods] 20. USB Wi-Fi Choose [Set up Wi-Fi connection using a USB cable], then click [Next] 9
21. USB Connect printer and computer with USB cable
22. Please wait
10
23. Choose the network name from the list, then click [Next] 24. Type in wireless network password, then click [Next] 11
25. Please wait
26. Click [Next]
12
27. USB Unplug the USB cable, then click [Next]
28. Please wait
13
29. Click [Add Printer] 30. Canon G600 series Choose [Canon G600 series], then click [Add] 14
31. Please wait
32. Click [Next]
15
33. Click [Next]
34. Driver installation was completed, click [Continue online]
–End-
16
Documents / Resources
 |
Canon G600 Series on Mac OS Via WiFi Connection [pdf] Installation Guide G600 Series on Mac OS Via WiFi Connection, G600 Series, on Mac OS Via WiFi Connection, OS Via WiFi Connection, Via WiFi Connection, WiFi Connection |