CANARM 09-102-16 Override Kit for Actuators
Specifications
| Item No. | Part Number | Quantity |
|---|---|---|
| 1 | 09-302-16 | 1 |
| 2 | BZHCS122G5 | 1 |
| 3 | NUT1/2LSS | 1 |
| 4 | 09-302-17 | 2 |
| 5 | NUT1/4LSS | 8 |
| 6 | BOL1/4×1 H | 8 |
| 7 | ACTUATOR | 1 |
| 8 | WALL | 1 |
| 9 | Actuator Wall Lags | 8 |
Installation Steps
Step 1
Attach wall brackets to the actuator with 1/4″ bolts x 1″ long. Require 4 bolts and 4 nuts per bracket.
Step 2
Attach the actuator with spacers to the wall in the desired location with the supplied wall anchors.
Step 3
Bolt on 09-302-16 winch with override mount for actuator with 1/2″ x 2″ full thread bolt and 1/2″ stainless lock nut.
Diagrams
Diagrams are provided to illustrate the installation process, showing the positioning of parts and their connections.
Details
- Detail A: Scale 2:5
- Detail C: Scale 1:3
- Detail D: Scale 1:2
- Detail E: Scale 2:5
- Detail F: Scale 2:5
Measurements
- Off the wall: 1/2 inch
- 5/8 inch spacing
- 9/16 inch spacing
- 2-1/16 inch spacing
- 1 inch spacing
Contact Information
For further assistance, please contact Canarm AgSystems
FAQS
- What is the purpose of the override kit?
The override kit is used for manual operation of the actuator in case of power failure. - How many bolts and nuts are required for each wall bracket?
Each wall bracket requires 4 bolts and 4 nuts. - What are the dimensions of the bolts used in this installation?
The bolts used are 1/4″ x 1″ long for the wall brackets and 1/2″ x 2″ for the actuator mount.
Documents / Resources
 |
CANARM 09-102-16 Override Kit for Actuators [pdf] Installation Guide 09-102-16, 09-102-16 Override Kit for Actuators, 09-102-16, Override Kit for Actuators, Kit for Actuators, Actuators |