F A01467M4A
10/2021
Instructions
FA01467M4A Fixed Support For Boom
General precautions for installers
Read the instructions carefully before beginning the installation and carry out the procedures as specified by the manufacturer.
- Only use this product for its intended purpose. Any other use is hazardous. • The manufacturer cannot be held liable for any damage caused by improper, unreasonable or erroneous use.
Dismantling and disposal
Dispose of the packaging and the device responsibly at the end of its life cycle, in compliance with the laws in force in the country where the product is used. The recyclable components are marked with a symbol and the material ID marker.
THE DATA AND INFORMATION IN THIS MANUAL MAY BE CHANGED AT ANY TIME AND WITHOUT NOTICE.
THE MEASUREMENTS, UNLESS OTHERWISE STATED, ARE IN MILLIMETRES.
Description
Fixed support.
Description of parts A
| 1 Post | 6 Self-threading screws 6.3×19 |
| 2 Boom support brackets | 7 Cap nuts |
| 3 Anchoring plate for support brackets | 8 Washers |
| 4 Post base | 9 Self-threading screws 6.3×25 |
| 5 Anchoring plate | 10 Hex-head screws M8x16 |
Size B
(*) The measurement is specified in the installation manual for the relevant barrier.
CAME S.p.A.
Via Martiri Della Libertà, 15
31030 – Dosson di Casier
Treviso – Italy
CAME.COM
FA01467M4A – 10/2021
Documents / Resources
 |
CAME FA01467M4A Fixed Support For Boom [pdf] Instructions FA01467M4A Fixed Support For Boom, FA01467M4A, Fixed Support For Boom, Support For Boom, Boom |