BUILTBRIGHT BB20EZ1 EZ Programmer
Specifications
- Model: #BB20EZ1
- Product Name: EZ Programmer
- Quantity: 1
Product Usage Instructions
Step 1 – Connect the Perimeter Strobe Lights:
- Connect the BLACK, YELLOW, and RED wires together. Do not connect the GREY and WHITE wire.
- Plug the perimeter strobe lights into the 1 to 4 adapter.
Step 2 – Program the Perimeter Strobe Lights
Note: Make sure the YELLOW wires of the programmer and 1 to 4 adapter are connected before the programmer is powered on.
- Power on the programmer by applying power to the RED and BLACK wire to turn it on.
- Press the single/dual color button to select the color mode you want. The programmer halo will show the color mode you select.
- Press the GREY/RED/WHITE wire button to program each wire.
- Select the strobe pattern:
- Press the strobe pattern select button to change the strobe pattern.
- Press the MODE 1/MODE 2/MODE 3 button to select your preset favorite strobe pattern.
- Long press the mode button for 2 seconds to memorize the strobe pattern.
Note: More information and videos are available online at BUILTBRIGHT website www.built-bright.com
FAQ
Q: Where can I find more information about programming options?
A: Additional information and videos can be accessed on the BUILTBRIGHT website at www.built-bright.com
PARTS LIST
- A: Programmer Panel
- B: 1 to 4 Adapter
DIMENSIONS
STEP 1 – CONNECT the Perimeter Strobe Lights
- Connect the BLACK , YELLOW , and RED wires together. Do not connect the GREY and WHITE wire. (Fig. 1)
- Plug the perimeter strobe lights into the 1 to 4 adapter. (Fig. 2)
Programmer PANEL
STEP 2 – Program the Perimeter Strobe Lights
Note: Make sure the YELLOW wires of the programmer and 1 to 4 adapter are connected before the programer is powered on.
- Power on the programmer by appling power to the RED and BLACK wire to turn it on.
- Press the single/dual color button to select the color mode you want. The programmer halo will show the color mode you select.
- Press the GREY/RED/WHITE wire button to program each wire.
- Select the strobe pattern:
- Press the strobe pattern select button to change the strobe pattern.
- Press the MODE 1/MODE 2/MODE 3 button to select your preset favorites strobe pattern.
- Long press the mode button for 2s to memorize the strobe pattern.
Note:
More information and videos are available online at BUILTBRIGHT website：www.built-bright.com
Documents / Resources
 |
BUILTBRIGHT BB20EZ1 EZ Programmer [pdf] Owner's Manual BB20EZ1 EZ Programmer, BB20EZ1, EZ Programmer, Programmer |
