BRIO 33213 Remote Control Train Set User Guide

Contents hide

1 BRIO 33213 Remote Control Train Set

2 Battery-powered functions

10 FREQUENTLY ASKED QUESTIONS

11 VIDEO – PRODUCT OVERVIEW

12 References

13 Related Posts

BRIO 33213 Remote Control Train Set

Battery-powered functions

Press the “Start” or “Back” button on the locomotive to activate and prepare it for the IR signal from the remote control. The locomotive can now be maneuvered by using either the buttons on the locomotive itself or those on the remote control. The locomotive will switch itself o automatically after five minutes of inactivity.

Note! The engine needs to be driving in the forward direction when driving up an ascending track.

Signal sound

Front lights
Handle in the locked position, the locomotive will move forward fast

Move forwards
Stop

Reverse with warning sound and light
Channels A and B (to control two coupled remote-controlled locomotives)

This infra-red controlled toy works best if you follow these instructions:

Infra-red light works best in normal to subdued lighting.
Avoid leaving the toy or its remote control in direct sunlight or flashing light. This can affect the infrared light. If this happens, wait approx. 10 seconds before reactivating the toy.

Both the remote control and the locomotive have channel selectors (A or B). Check that the channel selector on both units has the same setting. Installing batteries:

Locomotive: Requires 2 x 1.5 V AA batteries. Slacken the screw on the battery cover on the back of the locomotive. Install the batteries according to the illustration (+/-). Close the battery cover, and tighten the screw. Push one of the buttons on top of the locomotive to activate it.

Remote control: Requires 2 x 1.5 V AA batteries. Slacken the screw on the battery cover on the back of the remote control. Install the batteries according to the illustration (+/-). Close battery cover, and tighten the screw.

Important!

An adult should install and change batteries.
Never try to recharge batteries that are not rechargeable.

Remove rechargeable batteries from the product before recharging.
Rechargeable batteries should only be charged under adult supervision.

Never mix battery types. Never mix new batteries with old.
Use only recommended batteries of the same or corresponding type.

Install the batteries with the correct polarity.
When the batteries are flat, remove them from the product.

Do not short-circuit the poles.
Always remove the batteries if the product is not to be used for an extended period.

Discharged batteries and old electrical and electronic products must be disposed of at an approved collection center. Such products must not be treated as domestic refuse.
Do not expose batteries to dampness or water.

WHAT’S IN THE BOX

Remote Control
Battery
Train Set
User Guide

FEATURES

Radio-Controlled Engine: This train set comes with a radio-controlled engine that lets kids move the train around however they want.
Two Different Forward Speeds: The train has two different forward speeds so that kids can change how fast their engine moves.
Reverse Function: The controller has a reverse function that lets the train go backwards.
Sound and Light Effects: Pressing buttons on the controller makes the train sounds and lights more realistic, which makes the game more fun.
Compatible with Other BRIO Sets: This remote control train works with all other BRIO railway toys, so it can be added to a bigger collection.
Magnetic Coupling: The engine has a magnetic coupling that makes it easy for it to connect to other BRIO trains.
Design that lasts: Made with high-quality materials that will last and not break down during play.
Child-Friendly Remote: The remote control is made with little kids in mind, with simple buttons that are easy to press.
Benefits for education: Building the train tracks helps kids learn how to think logically and solve problems.
Safe for Kids: BRIO is very concerned with safety and does over 1,000 tests every year to make sure they meet strict safety standards.
Ideal Gift for Kids Ages 3 and Up: This train set is made for kids ages 3 and up, so it’s a great present for toddlers and preschoolers.

Small Size: The train is small and light, so little kids can easily play with and handle it.
Bright and Interesting Colors: The train is mostly yellow with some other colors added in. This makes it stand out and sparks kids’ imaginations.
Comes with Batteries: The train set comes with two LR44 batteries, which are all you need to play with it right away.

Easy to Set Up: The train and track are very easy to put together, and the set is ready to play with very little work.

SETUP GUIDE

Putting Batteries In To start, put two LR44 batteries into the remote device. Make sure that the batteries are put in so that the right way around.
Place the Train on Tracks: To start playing put the train on any BRIO-compatible track. It is possible for the train to go on straight, curved, or switch lines.

Power On the Controller: Press the power button on the remote control to make sure it’s on, and make sure the train moves when you tell it to.
Link Magnetic Coupling: To add more train cars, use the locomotive’s magnetic coupling to quickly link them together.
To test forward motion: Press the “forward” button on the remote to make the train move forward. Try both of the speed levels.

Test Reverse Motion: To make sure everything works well, press the “reverse” button on the remote to make the train move backward.
Turn on Lights and Sounds: To turn on the lights and real train sounds, press the light and sound buttons on the remote control.
Make sure the track is properly set up: To keep it from derailing, make sure the track is fully assembled and that all of the pieces are firmly connected.

Speed Up or Slow Down the Train: To change the speed of the train, press the “throttle” button. Try it at different speeds to see how it works.
Check for Obstacles: Before starting the train, make sure there aren’t any things on the tracks that could get in the way.
Use the Buttons on the Engine: There are buttons on top of the engine that let kids control how it moves, so they can play directly with the train.

Switch Tracks: If you’re using a track switch, make sure the tracks are lined up correctly so the train goes in the right way.
Watch Kids Play: Always keep an eye on little ones while they play to make sure they stay safe and make sure the train doesn’t get too rough.
The train should be put away safely after use: Turn off the controller and put the train and lines somewhere safe and dry.

Maintenance for batteries: The LR44 batteries need to be changed when the sounds or lights get dim or when the train stops moving.

CARE & MAINTENANCE

Changing the Batteries Often: If the train stops reacting or the lights and sounds get weak, you should change the LR44 batteries.
Keep the Tracks Clean: Check the train tracks often for dirt or other things that could cause the train to go off track. Use a soft cloth to clean them.

Wipe Down the Train: To keep the engine and remote control clean, wipe them down with a soft, dry cloth.
How to Store It: When not in use, keep the train set in a cool, dry place out of direct sunlight to keep the parts from getting broken.
Do Not Get Wet: Do not put the train or radio control in water; water could damage the electronics.

Check for Damage: Always check the train and track for damage that you can see, like cracks or parts that are coming loose.
Keep Track Connections Tight: To keep the track pieces from coming loose during play, make sure they are securely linked.
Handle with Care: Teach kids to be careful with the train and not drop it or throw it around.

Protect from Too Much Force: To keep the buttons on the remote and the train engine from breaking, don’t press on them with too much force.
Check the Magnetic Coupling: The train’s magnetic coupling should be checked every so often to make sure it’s working right and can connect to other cars.
Avoid Overuse: Limit playing to keep the train and tracks from getting too worn down, which will make them last longer.

Take It Apart After Use: If you want to keep the train and tracks in good shape, take them apart after a long time of use and store them individually.
Use Only Compatible Parts: To make sure they work right and avoid damage, only use tracks and tools that are compatible with BRIO.
Try to keep the train set away from very hot or very cold temperatures: This will protect both the engine and the tracks.

Replace Damaged Parts Right Away: If any parts of the set get broken, you need to replace them right away to keep the play area safe and the set working properly.

TROUBLESHOOTING

Issue	Possible Cause	Solution
The train doesn’t start	The battery is dead or incorrectly installed	Replace the LR44 batteries and check the installation
The train is moving slowly	Low battery charge	Replace with new LR44 batteries
The train is unresponsive to the remote	Remote control battery is weak or missing	Replace the remote control batteries with fresh LR44 batteries
Train derails	The track is not level or properly connected	Ensure the track is aligned and connected securely
Remote control malfunction	Batteries may be drained or the remote may be damaged	Replace batteries and inspect the remote for any damage
The train makes a buzzing noise	The motor may be obstructed or dirty	Check the train’s motor and clear any debris
The train stops moving suddenly	Loose connection between parts or batteries	Tighten connections and ensure battery contacts are clean
The train only moves in one direction	The remote control has malfunctioned	Test the remote control and replace the batteries
Train moves erratically	Track alignment issues or damaged wheels	Check the track and ensure the wheels are functioning properly
The train is too loud	The motor or gears may be under strain	Check if the train’s wheels are obstructed or misaligned
The train operates in reverse unexpectedly	The remote control has been set to reverse mode	Adjust the remote control to forward motion
Train fails to respond to forward command	Remote signal interference or weak battery	Ensure the remote is close to the train and the batteries are fresh
The train battery compartment is stuck	The battery cover may be jammed or broken	Use a small tool to open the compartment carefully
The remote control signal is weak	Interference from other devices or distance is too great	Move closer to the train or turn off nearby electronic devices
The train is vibrating excessively	The motor is misaligned or a wheel is damaged	Inspect motor and wheels for alignment or damage

PROS & CONS

Pros:

Remote control functionality provides interactive play.

The compact size makes it ideal for small children.
Encourages hand-eye coordination and problem-solving skills.
Durable construction ensures long-lasting use.

Reasonably priced at $38.19 for a remote-controlled toy.

Cons:

Requires LR44 batteries that need frequent replacement.

The remote control may be challenging for younger children to master.
Limited to a single train with no additional cars.
Battery compartments may be hard to access for some users.

Suitable only for children 3 and up, limiting age range.

WARRANTY

The BRIO 33213 Remote Control Train Set comes with a one-year limited warranty. This warranty covers defects in materials and workmanship under normal use. If the train set malfunctions or parts become defective within this period, BRIO will offer a repair or replacement. To claim the warranty, keep your proof of purchase handy and follow the manufacturer’s guidelines. The warranty is valid only when the product is used as intended and under typical conditions..

BRIO AB, Box 305, SE-201 23 Malmö, Sweden. Tel: +46 40 619 40 00.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FREQUENTLY ASKED QUESTIONS

What is the price of the BRIO 33213 Remote Control Train Set?

The BRIO 33213 Remote Control Train Set is priced at $38.19, providing an interactive play experience for young children.

What is the recommended age for the BRIO 33213 Remote Control Train Set?

The BRIO 33213 Remote Control Train Set is suitable for children aged 36 months (3 years) and above, making it ideal for toddlers and young kids.

What type of batteries does the BRIO 33213 Remote Control Train Set require?

The BRIO 33213 Remote Control Train Set requires 2 LR44 batteries to operate, ensuring it runs smoothly for extended periods.

What are the dimensions of the BRIO 33213 Remote Control Train Set?

The BRIO 33213 Remote Control Train Set has compact dimensions of 3.94 x 1.18 x 1.97 inches, making it easy for children to handle and store.

How much does the BRIO 33213 Remote Control Train Set weigh?

The BRIO 33213 Remote Control Train Set weighs 0.41 kilograms (approximately 0.9 pounds), which makes it lightweight for young children to carry and control.

How is the BRIO 33213 Remote Control Train Set operated?

The BRIO 33213 Remote Control Train Set is operated by a push mechanism, making it simple for young children to start and stop the train.

How many pieces are included in the BRIO 33213 Remote Control Train Set?

The BRIO 33213 Remote Control Train Set includes 1 piece, which is the train itself, designed to provide children with an easy-to-use remote control toy.

Does the BRIO 33213 Remote Control Train Set require assembly?

The BRIO 33213 Remote Control Train Set requires minimal assembly, with easy-to-follow instructions for quick setup.

What kind of control method does the BRIO 33213 Remote Control Train Set use?

The BRIO 33213 Remote Control Train Set uses a remote control system for easy and convenient operation, giving children complete control over the train.

Can the BRIO 33213 Remote Control Train Set be used by younger children?

The BRIO 33213 Remote Control Train Set is suitable for children aged 36 months and up, offering a safe and engaging experience for toddlers.

What materials are used in the BRIO 33213 Remote Control Train Set?

The BRIO 33213 Remote Control Train Set is made from high-quality, durable materials, ensuring long-lasting play for young children.

What are the key features of the BRIO 33213 Remote Control Train Set?

The BRIO 33213 Remote Control Train Set features remote control operation, compact size, and high compatibility with other BRIO toys, making it ideal for creative play.

Does the BRIO 33213 Remote Control Train Set require additional accessories?

The BRIO 33213 Remote Control Train Set requires 2 LR44 batteries for operation. Other than that, no additional accessories are needed.

How long do the LR44 batteries last in the BRIO 33213 Remote Control Train Set?

The battery life of the LR44 batteries depends on usage but should last a good amount of time with regular play.

What educational benefits does the BRIO 33213 Remote Control Train Set provide?

The BRIO 33213 Remote Control Train Set helps children develop hand-eye coordination, spatial awareness, and motor skills through remote-controlled play.