BoostGro ‎DYGL36BLKS1B LED Seed Starter Grow Light

INTRODUCTION

For those who enjoy indoor gardening, the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light is a strong, energy-efficient lighting option. This 20-watt LED grow light, which costs $44.99, has a color temperature of 5000 Kelvin and produces 2500 lumens of brightness, making it perfect for encouraging robust plant development and healthy seedling growth. This grow lamp’s 3-foot pro size allows it to cover a wider area, giving your plants the best possible light distribution. The DYGL36BLKS1B model, which is made by Boost Lighting, Inc., is built for 120 volts and has an AC power source, guaranteeing consistent, dependable operation for extended use. The light, which was released on August 27, 2024, is an excellent option for gardeners who wish to provide their plants with steady, full-spectrum light, particularly in indoor spaces with little natural sunlight. From seed to maturity, this light encourages quick, healthy growth of flowers, vegetables, or herbs.

SPECIFICATIONS

Brand	BoostGro
Price	$44.99
Light Source Type	LED
Power Source	AC
Wattage	20 watts
Voltage	120 Volts
Brightness	2500 Lumen
Size	3 FT Pro
Color Temperature	5000 Kelvin
Product Dimensions	35.43 x 3.54 x 1.42 inches
Weight	15.52 ounces
Item Model Number	DYGL36BLKS1B
Date First Available	August 27, 2024
Manufacturer	Boost Lighting, Inc.

WHAT’S IN THE BOX

• LED Seed Starter Grow Light
• Manual

FEATURES

• Full Spectrum Light: With 5000K daylight, 660nm red, and 450nm blue LEDs, the BoostGro DYGL36BLKS1B boasts a full spectrum light that offers the ideal amount of light for plant growth, from seedlings to mature plants.
• Optimized Red and Blue Light: Specifically created to focus on red and blue light wavelengths in order to improve plant growth at different phases, particularly during the vegetative growth phase, seedling development, and sprouting.

• Energy Efficient: With only 20W of power consumption and 2500 lumens of strong light, this grow lamp offers exceptional energy efficiency while lowering energy expenses.
• Low Energy Consumption: The lamp consumes very little power, even if it is bright, which makes it perfect for energy-conscious gardeners who wish to have good illumination without paying a lot of money for electricity.
• Adaptable Mounting or Hanging: The lamp comes with screw mount choices and a 2-foot hanging cord, allowing you to place or hang it as you like for the best plant coverage.
• Linkable Design: As your plants grow, it will be simpler to expand your setup thanks to this grow light’s linkable design, which enables you to connect up to four units per circuit.
• Built-in Inline Switch: This feature enables simple operation by enabling you to turn the light on and off without unplugging it.
• FCC-Certified: The lamp is safe to use in your home or indoor garden because it satisfies stringent safety requirements for electromagnetic interference.
• Damp-Rated: It is safe to use in places with mild humidity, like greenhouses, basements, and indoor gardens, thanks to its damp-rated construction.
• Bright Illumination: This light’s 2500 lumens of brightness offer enough light to support your plants’ healthy growth from seeds to fully grown greenery.
• Small Size: Measuring 35.43 x 3.54 x 1.42 inches, the grow lamp has a thin and small profile that fits well in a variety of indoor settings.

• 5000K Daylight Spectrum: By simulating natural daylight, the 5000K color temperature makes sure that your plants get the right amount of light for photosynthesis and general growth.
• Sturdy Construction: Constructed from premium parts, the BoostGro DYGL36BLKS1B is made to endure regular use and offer enduring dependability.
• Lightweight Design: Measuring only 15.52 ounces, the light is lightweight enough to be easily installed without taking up too much room in your growing area.

SETUP GUIDE

• Unpack the Product: Open the BoostGro DYGL36BLKS1B LED light and make sure that the screw mount, hanging cable, and light fixture are all included.
• Select the Installation Location: Pick an area where the plants will receive enough light. You can either hang the lamp freely or arrange it over plants.
• Assemble mounting options: If hanging, fasten the light to the two-foot hanging cable. For a more secure installation, use a screw mount for mounting.
• To secure the cable: Dangle the lamp from a stable surface or hook. Make sure the cable is firmly fastened to avoid unintentional falls.
• Place the Light: Depending on the height and stage of growth of the plants, place the light 6 to 12 inches above them.
• Plug the light into a 120V electrical outlet: Connect it to the power source. Make sure that the power source can sustain the necessary voltage and is safe.
• Turn the Light On: To turn on the light, use the inline switch. Verify that the lamp is operating correctly and supplying steady lighting.
• Modify the Height: For best coverage, modify the light’s height according to the type of plant to make sure it reaches the plant canopy.
• Connect Several Units: Use the linkable design to connect up to four units if you require more lighting. To increase coverage, connect all of the lights to a single power circuit.
• Check Light Spread: Make sure that each plant receives the same amount of light. Make any required adjustments to prevent any areas from being underlit.
• Use a Timer: To effectively control the amount of light your plant receives, think about programming a timer to run on/off cycles automatically.
• Despite the light’s energy efficiency: Keep an eye on its power usage to make sure it stays within your desired range.
• Test Light Intensity: After installation, make sure the light intensity is appropriate for the stage of growth of your plants. If needed, change the distance or brightness.
• Assess Coverage Area: If you are using numerous units, make sure the light coverage area is appropriate for your growth space.
• Verify the light’s safety: Make sure all of the cables are firmly attached and that it is not exposed to any dampness or other dangers while in use.

CARE & MAINTENANCE

• Turn Off and Unplug: To avoid electrical dangers, make sure the light is turned off and unplugged before doing any repair.
• Dust the Surface Frequently: To preserve light intensity, dust the grow light’s LED surface with a gentle cloth. Steer clear of harsh cleaning agents.
• Examine for Wear and Tear: Frequently check the light for any obvious wear or damage, paying particular attention to the areas surrounding the wires and mounting hardware.
• Examine Electrical Components: Make sure the connections and power cable are secure and free of exposed wires or wear.
• Clean the Reflector: To preserve optimal light efficiency and avoid dust buildup, clean the reflector’s surface.
• Prevent Wetness Exposure: Although the lamp has a damp rating, make sure it stays away from excessive wetness as this could harm its parts.
• Test Light Functionality: Examine all connections and see if any LED bulbs need to be replaced if the light flickers or stops working.
• Modify Light Distance: To guarantee adequate light intensity and avoid light burn, modify the distance between the light and the plant canopy as the plants become larger.
• Track Plant Development: Pay attention to how your plants react to the light. Increase the light if they are expanding excessively. Lower it if there are indications of light burn.
• Replace Faulty Bulbs: If an LED bulb isn’t working properly, replace it or get a replacement under warranty from the manufacturer.
• Reposition the Light: To keep your plants from growing too far toward the light source, move the light as they get higher.
• Check for Overheating: Although this light generates very little heat, keep an eye on the surrounding temperature to make sure plants don’t become overheated.
• Use Surge Protection: To avoid electrical damage from power surges, always plug the grow light into a surge protector.
• Store the Light Correctly: To prevent exposure to dust, moisture, or extremes in temperature, store the light in a cool, dry location if you must.

TROUBLESHOOTING

Issue	Solution
Light does not turn on	Check the power connection and ensure the light is plugged into a working outlet.
Light flickers or dims	Inspect the power source for consistency or try using a different outlet.
Light is too dim for plant growth	Ensure the light is positioned close enough to the plants, or use more lights for larger setups.
Light is overheating	Make sure the light has proper ventilation to prevent heat buildup.
Light turns off unexpectedly	Inspect the cord for damage or try plugging the light into a different power source.
The light’s color temperature appears off	Verify the model number and ensure you purchased the correct light with a 5000K rating.
Light does not cover enough space	Consider adding additional lights for larger plant areas or move the light closer to the plants.
The light is producing unusual noises	Ensure that the light is free from any obstructions or dirt and check for electrical issues.
The in-line switch isn’t working	Ensure the switch is correctly installed or try using a different power outlet.
Light’s brightness reduces over time	Clean the light to remove dust and dirt; check for wear and tear.

PROS & CONS

Pros:

1. Energy-efficient LED technology saves on electricity while providing ample light for plant growth.
2. 2500 lumens brightness ensures sufficient light for all stages of seedling growth.
3. 5000 Kelvin color temperature mimics natural sunlight, promoting photosynthesis.
4. 3 FT Pro size offers extended coverage, making it ideal for larger plant setups.
5. Affordable price for a high-performance LED grow light, offering great value.

Cons:

1. AC power source may limit flexibility in positioning compared to battery-operated options.
2. The 20-watt power may not be sufficient for large-scale commercial setups.
3. Brightness may not be adjustable, which could limit customization for specific plants.
4. Requires a stable electrical outlet, limiting placement options in some setups.
5. The length of the cord may not be long enough for certain arrangements.

WARRANTY

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light comes with a 1-year limited warranty from Boost Lighting, Inc. This warranty covers defects in material and workmanship under normal use. If you experience any issues with the light during the warranty period, the company will repair or replace it at no extra cost. Make sure to retain your proof of purchase to ensure eligibility for warranty claims. The warranty offers peace of mind for your indoor gardening needs, ensuring the light performs optimally throughout its lifespan.

FREQUENTLY ASKED QUESTIONS

What are the dimensions of the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light measures 35.43 x 3.54 x 1.42 inches, offering ample coverage for larger seed trays or plant setups indoors.

How much does the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light weigh?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light weighs 15.52 ounces, making it lightweight and easy to install over plant containers or seed trays.

What is the power source for the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light is powered by AC, providing a consistent power supply to ensure long-lasting performance for seed starting.

What is the wattage of the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light has a wattage of 20 watts, offering efficient energy use while providing sufficient light for seedling growth.

What is the brightness of the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light offers a brightness of 2500 lumens, ensuring bright and intense lighting that supports plant photosynthesis and seedling development.

What is the color temperature of the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light has a 5000 Kelvin color temperature, providing cool white light that closely mimics natural daylight, ideal for indoor plant growth.

What is the voltage required for the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light operates at 120 volts, which is compatible with standard household electrical outlets in North America.

What size is the BoostGro DYGL36BLKS1B LED Seed Starter Grow Light?

The BoostGro DYGL36BLKS1B LED Seed Starter Grow Light is available in a 3 FT Pro size, offering extended length to cover a larger area for more seed trays or plants.

References

• User Manual