BLAUBERG Turbo 150 G Inline Mixed Flow Fan Instruction Manual

Turbo 150 G Inline Mixed Flow Fan

Product Specifications

  • Model: Turbo 150 G
  • Connected air duct size: 150mm
  • Speed: 2
  • Phases: 1
  • Minimum supply voltage: 230V
  • Maximum supply voltage: 230V
  • Power supply frequency: 50/60Hz
  • Rated power: 50W
  • Unit current: 0.22A
  • Maximum airflow: 565m3/h
  • Rotation speed at 50Hz: 32
  • Sound pressure level LpA at 3m: 44 dB
  • Weight: 2.95kg
  • Transported air temperature (max): 60°C
  • Ambient air temperature min: 0°C
  • Ambient air temperature max: 0°C
  • Ingress protection rating: IPX4
  • Ingress protection rating of the drive:
    IPX4

Ecodesign Information

  • Trademark: Blauberg
  • Model: Turbo 150 G
  • Type of ventilation unit: Cold, Average,
    Warm
  • Type of drive installed: Average
  • Type of heat recovery system: Warm
  • Specific energy consumption (SEC): 53.8
    kWh/(m2/a)

Dimensions

  • B: 220mm
  • H: 251mm
  • L: 289mm

Product Usage Instructions

Frequently Asked Questions (FAQ)

Q: What is the maximum airflow of the Turbo 150 G?

A: The maximum airflow of the Turbo 150 G is 565m3/h.


“`

blaubergventilation.com.au
Turbo 150 G
Mixed-flow inline fans · Sound pressure level LpA at 3 m: 44 · Motor type: AC · Control: Speed controller · Impeller type: Mixed-flow · Casing material: Plastik · Installation in any position · Cable with mains plug · Temperature sensor

Connected air duct size Speed Phases Minimum supply voltage Maximum supply voltage Power supply frequency Rated power Unit current Maximum airflow Rotation speed at 50hz Sound pressure level LpA at 3 m Weight Transported air temperature (max) Ambient air temperature min Ambient air temperature max Ingress protection rating Ingress protection rating of the drive

Unit of measurement
mm V V Hz W A
m3/h –
dB(A) kg ° ° ° –

42 0.19 415

Turbo 150 G
150 2 1
230 230 50/60

50 0.22 565

32

44

2.95

60

0

0

IPX4

IPX4

blaubergventilation.com.au

Dimensions
ØD 148

ØD1 187

B

H

L

220

251

289

blaubergventilation.com.au

Ecodesign
Trademark Model
Specific energy consumption (SEC) (kWh/(m2/a))
Type of ventilation unit Type of drive installed Type of heat recovery system Maximum flow rate (m3/h) Electric power input (W) Reference flow rate (m3/s) Reference pressure difference (Pa) Specific power input (SPI) (W/(m3/h)) Control typology Maximum external leakage rates (%) Sound power level (dB(A)) Declared typology
The annual electricity consumption (AEC) (kWh/a)
The annual heating saved (AHS) (kWh/a)

blaubergventilation.com.au

Blauberg

Turbo 150 G

Cold

Average

Warm

53.8

A+

26.7

B

11.2

E

Unidirectional

Variable speed

None

500

50

0.097

50

0.12

Local demand control

2.7

66

RVU UVU

Cold

Average

Warm

64

64

64

Cold

Average

Warm

5536

2830

1280

Documents / Resources

BLAUBERG Turbo 150 G Inline Mixed Flow Fan [pdf] Instruction Manual
Turbo 150 G Inline Mixed Flow Fan, Turbo 150 G, Inline Mixed Flow Fan, Mixed Flow Fan, Flow Fan, Fan

References

Leave a comment

Your email address will not be published. Required fields are marked *