ModMi
Build Freely To Inspire Creativity
STEAM PARENT-CHILD INTERACTION AI COMBINATION

Programming Methods

Teach and playPlay interesting robot actions easily
Graphical programmingQuick start of the world of programming
Code programmingCompatible with advanced programming language, exploring more applications

Robot+Programming+AI

Basic module

T module	Joint Module
	Range of motion: ±90°
	Weight: 100g
I module	Joint Module
	Position mode: 0-320° Velocity mode: Unlimited rotation
	Weight: 105g
G module	Clamp Module
	Position mode: 0-90° Constant force mode
	Weight: 123g

Control module

F module	IO Port：2
	Input voltage: 7.4V
	Battery capacity: 1500mAH
	Communication : wifi and serial port
	Weight: 100g
P module	IO Port：7
	Input voltage: 7.4V
	Battery capacity: 2500mAH
	Communication : wifi and serial port
	Weight: 420g

Auxiliary module

Orthogonal module	90 ° installation between different modules
Bionic foot module	Simulate animal support legs to realize bionic robot walking
External sensor	Equipped with a variety of sensors, including gesture recognition, ultrasonic sensors and infrared sensors.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Foshan Biowin Robot Automation Technology Co., Ltd
: 400-994-0579
: www.biowinedu.com

Documents / Resources

	Biowin ModMi Robot System with App [pdf] User Guide 2BB5J-BW003MD02, 2BB5JBW003MD02, bw003md02, ModMi, Robot System with App, ModMi Robot System with App
	Biowin ModMi Robot System with App [pdf] User Guide 2BB5J-BW003MD03, 2BB5JBW003MD03, bw003md03, ModMi, Robot System with App, ModMi Robot System with App, ModMi Robot System

References

• User Manual