CUSTOM DOOR PANEL SPECIFICATIONS
FOR BUILT-IN REFRIGERATOR COLUMN MODEL REF24RCBPNV
Panel to be manufactured and fitted by cabinet maker and installer
- DOOR PANEL
- CABINET
NOTE: The refrigerator comes with a 4″ (100 mm) stainless steel toe kick installed to fit a standard 84″ (2134 mm) tall cabinet niche. For flush installation in a standard 25″ (635 mm) deep cabinet niche, maximum door panel thickness is 15/16″ (24 mm).
| DIMENSIONS – INCHES (MILLIMETERS) | ||
| (A) | Height of door panel | 79 15/16” (2030) |
| (B) | Width of door panel | 23 3/4” (603) |
| (C) | Gap between door panel and cabinet | 1/8” (3) |
| (D) | Toe kick height | min 3 3/4” (96) – max 5 3/8” (136) |
| (E) | Cabinet height | min 83 13/16” (2129) – max 85 3/8” (2169) |
| (F) | Cabinet width | 24” (609) |
| Thickness of custom panel | min 3/4” (19) – max 1 1/2” (38) | |
| WEIGHT – POUNDS (KILOGRAMS) | |
| Maximum weight of door panel | 66 lbs (30 kg) |
Disclaimer: while every effort has been made to insure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change any part of the information at any time without notice. For detailed installation specifications consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa.
STAINLESS STEEL DOOR PANEL SPECIFICATIONS
FOR BUILT-IN REFRIGERATOR COLUMN MODEL REF24RCBPNV
SP24CX accessory panel to be fitted by installer
- DOOR PANEL
- CABINET
NOTE: The refrigerator comes with a 4″ (100 mm) stainless steel toe kick installed to fit a standard 84″ (2134 mm) tall cabinet niche.
| DIMENSIONS – INCHES (MILLIMETERS) | ||
| (A) | Height of stainless steel panel | 79 15/16” (2030) |
| (B) | Width of stainless steel panel | 23 3/4” (603) |
| (C) | Gap between steel panel and cabinet | 1/8” (3) |
| (D) | Toe kick height | min 3 3/4” (96) – max 5 3/8” (136) |
| (E) | Cabinet height | min 83 13/16” (2129) – max 85 3/8” (2169) |
| (F) | Cabinet width | 24” (609) |
| Thickness of stainless steel panel | 3/4” (19) | |
| WEIGHT – POUNDS (KILOGRAMS) | |
| Weight of stainless steel panel | 49 lbs (22 kg) |
Disclaimer: while every effort has been made to insure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change any part of the information at any time without notice. For detailed installation specifications consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa.
Documents / Resources
 |
Bertazzoni REF24RCBPNV Built-in Refrigerator Column [pdf] Owner's Manual REF24RCBPNV, SP24CX, REF24RCBPNV Built-in Refrigerator Column, REF24RCBPNV, Built-in Refrigerator Column, Refrigerator Column, Column |
