BENWIS IDSKC3 Split Keyboard Case for ipad

Product Information

The product is a split keyboard case designed for iPad. It has a working range of 33 feet (10m) and operates on a voltage range of 3.0V to 4.2V. The working current ranges from 0.88mA to 3.85mA, and the sleep current is low. The case is equipped with a Type-C port for charging.

Product Usage Instructions

1. To turn on the keyboard case, slide the ON/OFF switch to the ON position.
2. Pair the keyboard case with your iPad by going to iPadOS settings, selecting “Bluetooth & devices”, and then selecting “Keyboard case” from the list of connected devices.
3. Ensure that the iPad battery level is above 50% for optimal usage.
4. Insert your iPad into the keyboard case, ensuring a secure fit.
5. For protection when the iPad case is removed from the keyboard, use the stylus pen to remove the shaft sleeve located in the upper right corner of the protective case (refer to Figure 1). Place the shaft sleeve on the exposed shaft to prevent any harm (refer to Figure 2).
6. If you want to assemble the iPad case with the keyboard, remove the shaft sleeve from the protective case and place it back into its original position (refer to Figure 4).
   Please note that any modifications not approved by the responsible party may void the user’s authority to operate the equipment. For more detailed instructions and troubleshooting tips, refer to the user manual.

parameter

• Working range：33 feet(10m)
• Working voltage：3.0V~4.2V
• Working current：0.88mA~3.85mA
• Sleep current：<125μA
• Battery：450mAh
• Charging time：<2 hours
• Charging voltage：5V
• Charging current：300mA
• Working temperature：-10℃~+55℃
• Key life：>5million times

INSTALL & UNINSTALL

1. Install iPad
   Align the left side of the iPad with the lower edge of the upper cover protective shell, and then press the iPad into the protective shell along the two sides to the upper edge.

   
2. Uninstall iPad
   Push two corners of the protective case upper edge to release iPad’s two upper corners, and turn the iPad forward to detach the entire upper edge of the iPad from the protective case, then pull out the iPad upward.

   

3. Split keyboard and assemble
   When the iPad case is perpendicular to the keyboard, press the keyboard in the red circle with one hand, then pull the iPad case up with the other hand to separate from keyboard. Reinstall the case to keyboard, pls align the case hole with rotalting shaft and insert back onto keyboard.

   

COMPATIBILITY

This Bluetooth keyboard is compatible with iPadOS 13.4.1 (or higher). We strongly recommend that you upgrade your iPadOS to 13.4.1 (or higher) for optimal performance.

• To view your iPadOS version:
  1. Settings >General>About>Software Version;
  2. Upgrade your version to the latest version for optimal performance.

     
• To upgrade iPadOS to the latest version:
  1. Settings >General>Software Update;
  2. Click “Download and Install”

     
     *If you see “Resume Download”, please click this option.

PAIRING & CHARGING

To connect to your iPad device:

1. Turn the ON/OFF switch to the ON position first
2.  The connection indicator starts flashing blue (if the indicator does not start flashing, press and hold the “pair” key for 5 seconds),
3. Turn on the Bluetooth switch in the “Settings” app.
4. Click “Settings” app >Bluetooth, check “DEVICES” at the right side, click ”Keyboard case”，
5. Click ”Pair” if pop-up window appears. The connection indicator turns off after the connection is successful.
   *Repeat steps 1-3 when connect to new devices.

   
   

Indicators

1. Caps Lock Indicator
2. Connection Indicator
3. Power level Indicator
   • When power level > 50%, blue light turn on 3 seconds; when power level 20%~50%, yellow light turn on 3 seconds.
   • When red light is flashing, power level is lower than 20%, in order not to affect your using, please charge in time.

     

KEYBOARD

Common shortcut keys:

• CMD+Tab= Switch apps
• CMD+A= Select All
• CMD+C= Copy
• CMD+V= Paste
• CMD+X= Cut
• CMD+Z= Undo
• CMD+shift+3= Screen shot
• alt+Del= Screen lock/unlock
• option+shift+2= €
• option+3= ₤
• alt+ = touch pad on/off

TOUCH PAD OPERATION

1. Single finger
   • Left-click (customizable): Tap with one finger to click

     

   • Slide the pointer: Move with single finger

     
   • Drag items: Tap twice with single finger, then hold and drag around

     

   • Slide over switcher: Slide single finger down from the top edge of screen to see all avtive apps

     

   • To see the Dock while you’re using an app: Slide single finger up from the bottom edge of screen until the Dock appears, then release

     
2. Two fingers
   • Right-click (customizable): Tap with two fingers to right-click

     
   • Pay attention to: Slide two fingers from right to left

     

   • Switch window to left: Swipe from left to right with two fingers

     

   • Roller scroll: Swipe with two fingers to the left/right or scroll up/down

     
   • Zoom in

     

   • Zoom out

     

3. Three fingers
   • Open recently used window (Switch back to previous app): Three fingers moving down at the same time

     

   • Return to Home page: Three fingers moving up at the same time

     
   • Active window (left/right slide switch): Three fingers slide left and right together

     
4. Four fingers
   • Screen shot: Tap with four fingers

     

Notice:

• alt+ to turn on/off touch tap function.
• Custom settings (when connection is successful):
  Settings >Accessibility>Touch>Assistive Touch>Devices>Connected devices>Customize Additional Buttons>Set the action on the trackpad>Select instruction

TIPS

The upper right corner of our protective case is equipped with a shaft sleeve as shown in Figure 1 below. When the iPad case is removed from keyboard, in order to prevent the exposed shaft from harming you, please take out the shaft sleeve with stylus pen and put it on the shaft, as shown in Figure 2. If you need to assemble the iPad case with keyboard, remove the shaft sleeve and put it back into the case as  shown in Figure 4.

FCC NOTE

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Documents / Resources

BENWIS IDSKC3 Split Keyboard Case for ipad [pdf] User Guide 2BC4B-IDSKC3, 2BC4BIDSKC3, IDSKC3, IDSKC3 Split Keyboard Case for ipad, Split Keyboard Case for ipad, Keyboard Case for ipad, Case for ipad, ipad

References

• User Manual