BenQ HT1070A Digital Projector User Guide
WARNING INSTRUCTION
PAKCAGE CONTENT
Remote control
- Bright Boost is not supported by this model.
Projector dimensions
The above numbers are approximate and may be slightly different from the actual measurements. Only the recommended screen sizes are listed. If your screen size is not in the table above, please contact your dealer for assistance.
Ceiling mount screw: M4
(Max L = 25 mm; Min L=20 mm)
Unit: mm
DIMENSION
INSTALLATION INSTRUCTION
Specifications
Optical | Input terminals |
Resolution 1920 x 1080 1080p |
Computer input RGB input |
Display system | D-Sub 15-pin (female) x 1 |
1-CHIP DMD | Video signal input |
F = 2.42 to 2.62 | Digital signal inp |
f = 19.0 to 22.65 mm | HDMI x 2 |
Offset | Audio signal input |
107±5% | Audio in |
Zoom ratio | PC audio jack x 1 |
1.2X | Environmental Requirements |
Lamp | Temperature |
210 W lamp | Operating: 0°C-40°C at sea level |
Electrical | Storage: -20°C-60°C at sea level |
Power supply | Power supply |
AC100–240V, 2.60 A, 50-60 Hz (Automatic) | Operating: 10%-90% (without condensation) |
Power consumption 260 W (Max); < 0.5 W (Standby) | Storage: 10%-90% (without condensation) |
Output terminals | Mode on) |
Speaker | Storage: 0-12200 m at 30°C |
(Stereo) 2 watt x 1 | Transporting |
Audio signal output | Original packing or equivalent is recommended |
Control | Repairing |
RS-232 serial control | Please visit below website and choose |
9 pin x 1 | your country to find your service contact |
IR receiver x 1 | IR receiver x 1 |
USB mini-B x 1 | http://www.benq.com/welcome |
Lamp life results will vary depending on environmental conditions and usage.
For further information, please refer to the enclosed user manual.
- Arsenic-free optical glass
© 2017 BenQ Corporation.
All rights reserved. Rights of modification reserved.
PKJ39-4000-02
P/N: 4J.JH101.003
Documents / Resources
![]() |
BenQ HT1070A Digital Projector [pdf] User Guide HT1070A Digital Projector, HT1070A, Digital Projector, Projector |