belkin F1DN102KVM-UN-4 Series Universal Secure KVM Switch

Specifications

• Supported SW versions: EX_SC_15220623_PP_17150523, SC446_18160622-PP446_13130622
• Compatible models: Various models including Universal 2nd Gen Secure KVM and Modular Secure KVM

FAQ

Q: What should I do if I encounter an error message during login?

A: Follow these steps – Disconnect the USB-A to RJ11 cable from the PC side, power cycle the SKVM, reconnect the USB-A to RJ11 cable, and relaunch the application.

List of supported SW versions for the KVM Terminal Tool setup:
All SKVM with the below firmware and software versions:

1. EX_SC_15220623_PP_17150523
2. SC446_18160622-PP446_13130622

Compatible models include

Universal 2nd Gen – Secure KVM

• F1DN102KVM-UN-4
• F1DN104KVM-UN-4
• F1DN108KVM-UN-4
• F1DN116KVM-UN-4
• F1DN202KVM-UN-4
• F1DN202KVMUNN4M
• F1DN204KVMUNN4M
• F1DN204KVM-UN4M
• F1DN204KVM-UN-4
• F1DN208KVM-UN-4
• F1DN102KVM-UNN4
• F1DN104KVM-UNN4
• F1DN104KVMUNN4Z
• F1DN108KVM-UNN4
• F1DN202KVM-UNN4
• F1DN204KVM-UNN4
• F1DN204KVMUNN4Z

Universal 2nd Gen – Modular Secure KVM

• F1DN102MOD-BA-4
• F1DN104MOD-BA-4
• F1DN108MOD-BA-4
• F1DN202MOD-BA-4
• F1DN204MOD-BA-4
• F1DN208MOD-BA-4
• F1DN102MOD-DD-4
• F1DN102MOD-HH-4
• F1DN102MOD-PP-4
• F1DN104MOD-DD-4
• F1DN104MOD-HH-4
• F1DN104MOD-PP-4
• F1DN202MOD-DD-4
• F1DN202MOD-HH-4
• F1DN202MOD-PP-4
• F1DN204MOD-DD-4
• F1DN204MOD-HH-4
• F1DN204MOD-PP-4

Installation Guide

Hardware Requirements:

1. Belkin Secure KVM M series
2. Windows-compatible PC (Windows 10/11 8GB RAM)
3. USB-to-RJ11 cable (F1DN-RC-USB-CBL)
   1. To create your own cable, please refer to the Belkin Administrator Manual found at: https://www.belkin.com/products/product-resources/cybersecurity-skvm/resources/.

Software Requirements

1. OS: Windows 10/11 8GB RAM
2. Belkin SKVM M series Terminal to RS-232 Software version 1.02

Installation Instructions

Download from Belkin Resource Center at:

https://www.belkin.com/products/product-resources/cybersecurity-skvm/resources/

• a. Install the application: Belkin_RS232Term_setup_1.02.exe
• b. Choose the location to install files and select “Next”
• c. Create a desktop shortcut
• d. Select “Install” to begin and follow the installation wizard to complete the process

Launch the application

• a. A window will open – Click About on the upper right side to verify the version.
  
• b. Connect the Administrator PC and SKVM as follows:
  
• c. Using the USB-A to RJ14/RS-232 cable, connect USB-A to the PC and RJ14/RS-232 to the RCU port on the SKVM.
• d. Connect the AC power cable to the SKVM.
• e. Select an available COM port.
  
• f. Once you have selected the correct COM port, click “Connect”.
  
• g. Look for the two indications of connectivity:
  • “Connect” icon will change to “Disconnect”.
  • On the lower right corner, the status will change to green “Connected”.
    
• h. Enter the Administrator username followed by the password. Wait approximately 10 seconds for the application to connect and collect information from the KVM.
  • If logging into Terminal Mode for the first time, use the following values:
    • Username: admin1234
    • Password: 1234ABCDefg!@#
  • Password must be changed upon initial connection.
    

IMPORTANT: The main admin user account and password cannot be reset or deleted. If the password is mistyped or misplaced, it cannot be recovered. If you misplace the password, your SKVM/SKM will continue to function with the last setting changes made to it.

In the event of an error message during login, follow these steps

1. Disconnect the USB-A to RJ11 cable from the PC side.
2. Power cycle the SKVM.
3. Reconnect the USB-A to RJ11 cable back to the PC.
4. Launch the application.

Documents / Resources

belkin F1DN102KVM-UN-4 Series Universal Secure KVM Switch [pdf] Installation Guide F1DN102KVM-UN-4, F1DN104KVM-UN-4, F1DN108KVM-UN-4, F1DN116KVM-UN-4, F1DN202KVM-UN-4, F1DN202KVMUNN4M, F1DN204KVMUNN4M, F1DN204KVM-UN4M, F1DN204KVM-UN-4, F1DN208KVM-UN-4, F1DN102KVM-UNN4, F1DN104KVM-UNN4, F1DN104KVMUNN4Z, F1DN108KVM-UNN4, F1DN202KVM-UNN4, F1DN204KVM-UNN4, F1DN204KVMUNN, F1DN102KVM-UN-4 Series Universal Secure KVM Switch, F1DN102KVM-UN-4 Series, Universal Secure KVM Switch, Secure KVM Switch, KVM Switch, Switch

References

• User Manual