BASIO active2 SHG12 Simple Smart Phone 6 Case Instruction Manual

Full Instruction Manual
If you need further details, refer to the Full Instruction Manual available on the au website: Full
Instruction Manual Link

Navigation and Button Operations

In this manual, operations are described using the following format:

[Action]: Description of the action

p (press and hold for at least 2 seconds): Detailed operation instructions
Tapping: Selecting keys or buttons by lightly tapping on the screen

Notes on Illustrations and Screenshots
Keep in mind the following points while referring to illustrations and screenshots:

Based on product with au SIM card installed unless specified otherwise

Descriptions are for portrait orientation; differences may occur in landscape mode
Screenshots may not reflect exact visuals; some portions may be omitted

Descriptions vary based on default Home screen and home application used
Menu items and icons may differ based on functions and conditions

References to microSD memory cards encompass various types of microSD cards

Frequently Asked Questions

Q: Where can I find the detailed instructions for specific functions?
A: You can access the Full Instruction Manual on the au website for comprehensive details on various functions.

Q: How do I switch to the App list screen from the Home screen?
A: Tap [Apps] from the Home screen to switch to the App list screen.

Q: What is the default operating system of the product?
A: The product operates on AndroidTM 14. For updates, refer to the Online Manual or Full Instruction Manual available on the au website.

View Fullscreen

SHG12

Preface
Thank you for buying the “BASIO active2” (called the “SHG12” or the “product” from here on). Before using the product, be sure to read ” (Kantan Manual)” (Japanese) or ” (Full Instruction Manual)” (Japanese) for proper use.
List of Packaged Items
Before using the product, make sure that you have all the following packaged items.

Illustrations and Descriptions in This Manual
Note on Button Illustrations
In this manual, button illustrations are simplified as shown below.

Voice search P
button

Volume UP button
Volume DOWN button ] Power button Q

SHG12
· (Kantan Manual) (Japanese)
The following items are not included in the package. · SIM card · microSD memory card · AC adapter · Earphones · USB Type-CTM cable · Wired LAN adapter · Ethernet cable
· Purchase a specified charger (sold separately).
The battery is built into the product. Illustrations of the product in this manual are only for reference.
They may look different from the actual product.
Operating Instructions
“Basic Manual” (This Manual)
Handles only basic operations for main features.
“Online Manual” (Japanese)
Follow the procedure below to view “Online Manual” (Japanese), which describes details on various functions. Home screen [Apps] [Support] [ (Online Manual)] You can also view “Online Manual” (Japanese) on the au website. h( ttps://www.au.com/online-manual/shg12/) (Japanese)
” (Full Instruction Manual)” (Japanese)
” (Full Instruction Manual)” (Japanese), which describes details on various functions, is available on the au website. h( ttps://www.au.com/support/service/mobile/guide/manual/) (Japanese)

Phone button Home button Mail button

Description of Navigation and Button Operation
In this manual, operation procedures are described as follows.

Description
Home screen [Apps] [Simple Settings] [All settings menu] [About phone] p (press and hold for at least 2 seconds)

Meaning Slide/flick the Home screen, tap* “Apps” to switch to the App list screen. Next, tap ” Simple Settings”, and then tap “All settings menu”, then “About phone”.
Press and hold p for at least 2 seconds.

* Tapping is to select a key or button displayed on the screen by lightly tapping it with your finger.

Notes on Illustrations and Screenshots
Screenshots and operations in this manual are based on the product with an au SIM card installed unless otherwise described. Descriptions in this manual are based on operations in portrait orientation. In landscape orientation, menu items, icons, keys, buttons on the screen, and other user interface items may be different. Illustrations or screenshots may look different from the actual ones. Portions of the screen may be omitted.

In this manual, portions of the screen such as indicators are omitted.

Actual screen

In this manual

In this manual, screenshots for body color “Silver” are provided as examples.
Descriptions in this manual are based on operations for the default Home screen. Operations may be different depending on the home application.
Menu items, layers and icons described in this manual may be different depending on functions being used and conditions.
In this manual, “microSDTM memory card (commercially available),” “microSDHCTM memory card (commercially available)” and “microSDXCTM memory card (commercially available)” are referred to as “microSD memory card” or “microSD.”
Descriptions on this manual are based on AndroidTM 14. For the latest version, refer to “Online Manual” or ” (Full Instruction Manual)” (Japanese) available on the au website. h( ttps://www.au.com/support/service/mobile/guide/manual/) (Japanese)
The company names and product names appearing in this manual are trademarks or registered trademarks of their respective holders. Also, TM and ® marks are sometimes omitted.

Safety Precautions
When Using the Product
Before using the product, be sure to read the “Safety Precautions” for proper use. Before you assume that the product is malfunctioning, refer to “Troubleshooting” to check the symptom. You can also refer to ” (Trouble check)” (Japanese) on the au website shown below. h( ttps://www.au.com/trouble-check/)(Japanese)
· Communication is not possible in places where the signal does not reach (e.g. tunnels and basements), even within the service area. In addition, communication may not be possible in poor reception areas. Communication may be interrupted if you move into a poor reception area during communications.
· Since the product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated. (Yet the 5G/4G LTE/WiMAX 2+/UMTS/GSM system has highly secure confidential communication features.)
· Only au’s VoLTE (LTE network) can be used when connecting to emergency services within Japan.
· The product is compatible with au World Service. Each network service varies depending on the area and service content.
· Since the product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection in accordance with the Radio Law.
· The IMEI information of your cell phone is automatically sent to KDDI CORPORATION for maintenance and monitoring operational status of your cell phone.
· When using the product overseas, check the relevant laws and regulations of the country/region you visit beforehand.
· The Company is not liable for any damages or lost income arising from earthquakes, lightning, storms, floods or other natural disasters, or from fires, actions by third parties, other accidents, your actions, negligence, misuse, or use under other unusual conditions outside the responsibility of the Company.
· The Company is not liable for any incidental damages (change/ disappearance of saved content, loss of business profits, disruption of business, etc.) arising from use of or inability to use the product.
· The Company is not liable for any damages or lost income arising from failure to observe the contents of ” (Full Instruction Manual)” (Japanese) or ” (Kantan Manual)” (Japanese).
· You cannot use information obtained from the measuring sensor or GPS equipped with the product for the purpose which requires high reliability, as the obtained information is just used for a guide. Note that the Company is not liable for any damage or lost income arising from the difference caused by measurement.
· The Company is not liable for any damages or lost income arising from malfunction or other problems caused by any combination of connected devices or software not related to the Company.
· Captured image data or downloaded data may be altered or lost due to malfunctions, repairs, or mishandling of the product. The Company is not liable for any damages or lost profits resulting from recovery of these data.
· It is recommended that you keep a copy of important data on your PC’s hard disk, etc. Whatever the cause of the defect or malfunction may be, the Company assumes no responsibility for alteration or loss of saved data.
· Data such as contacts, still pictures/videos, etc. saved on the product may be altered or lost due to accidents, malfunctions, repairs, or mishandling. Be sure to keep a copy of important contents. Note that the Company is not liable for any damages or lost profits resulting from altered or lost contents.
· Note that content data (whether paid or free) saved on the product cannot be retained when the product is replaced for repair or other reasons.
· The product uses liquid crystal for its display. The display response speed may become slow when the ambient temperature is low. This is due to the property of liquid crystal and not a malfunction. The display response speed will return to normal at room temperature.
· Although the display used on the product employs high-precision technology, some pixels (dots) may remain on/off. This is not a malfunction.
· It is recommended that you store separate copies of data such as still pictures/videos and music saved on the product on your PC or cloud services, etc. Note, however, that you may not be able to make copies of some copyrighted data even by the abovementioned means.
· Do not dispose of the product with regular trash. Please cooperate in the collection of the product and optional accessories when they are no longer needed, to protect the environment and effectively use resources. Old products are collected at au Style/au shops and other places.

* “The Company” as appears in this manual refers to the following companies: Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY Manufactured by: SHARP CORPORATION
Reproduction of the contents of the instruction manual in part or in whole is prohibited.
The contents of the instruction manual are subject to change without notice.
Due to the specification changes of the operating system or termination of the services, some features become unavailable.
Every effort has been made in the preparation of the instruction manual. Should you notice any unclear points, omissions, etc., feel free to contact us.

Safety Precautions (Observe Strictly)

Before using the product, thoroughly read these safety precautions for proper use.

Be sure to observe the instructions described in these precautions to prevent injury self or others, or damage to property.

These labels show degree of risk from improper use.

DANGER

Indicates imminent risk of death or serious injury*1 from improper handling.

WARNING CAUTION

Indicates risk of death or serious injury*1 from improper handling.
Indicates risk of minor injury*2 and property damage*3 from improper handling.

*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term hospital attendance as an outpatient.
*3 Property damage: This refers to extended damage to buildings, furniture, livestock, pets, etc.
Symbols Signifying Prohibited/Compulsory Actions

Indicates an action that is not allowed.
Prohibited

Wet hands prohibited

Indicates that handling with wet hands is not allowed.

Disassembly prohibited

Indicates that disassembly is not allowed.

Indicates an action that must be done.
Instruction

Wetting with water prohibited

Indicates that use in a place where the product is likely to get wet is not allowed.

Disconnect plug from power outlet

Indicates that the power plug must be unplugged from the outlet.

Precautions Common to the Main Unit, Internal Battery, Charger, SIM Card, Peripheral Devices

DANGER

Prohibited Prohibited

Do not use, store or leave in hot places or where heat collects (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight, inside a vehicle in the hot sun). Doing so might cause fire, burns, injury, electric shock, etc.
Do not put in a cooking apparatus such as a microwave oven or induction stove or in a pressure vessel such as a pressure cooker; do not place near such devices. Doing so might cause fire, burns, injury, electric shock, etc.

Prohibited Prohibited Prohibited

Do not subject to or place directly on sand, soil, or mud. Do not touch with dirty hands. Doing so might cause fire, burns, injury, electric shock, etc. For waterproof and dustproof properties, refer to the following. zP.9 “Notes on Waterproof, Dustproof and Shock-resistant Properties”
Do not charge when the product is wet with water (drinking water, perspiration, seawater, urine of pet animals, etc.). Do not use it near water, such as in a bathroom or near a humidifier. Doing so might cause fire, burns, injury, electric shock, etc. For waterproof property, refer to the following. zP.9 “Notes on Waterproof, Dustproof and Shock-resistant Properties”
Do not subject the product to strong pressure or break the product. Especially when bringing the product putting in a pocket of clothes, do not let the product hit against surroundings or being put between the objects. Doing so may cause fire, burns, or injury due to internal battery damage. * Examples to avoid · Sitting or squatting with the product put in a pocket of
trousers or skirt · Putting the product in a pocket of outer wear and
catching them in a door or a door of car · Stepping on the product on a soft object such as a
sofa, bed, or bedding, or on a floor · Putting the product into a seat of train or bus

Disassembly prohibited Prohibited Prohibited
Wetting with water prohibited
Wetting with water prohibited
Instruction

Do not disassemble or modify. Doing so might cause fire, burns, injury, electric shock, etc.
Do not attempt to remove the internal battery from the product. Doing so might cause fire, burns, injury, etc.
The back cover (back part) cannot be removed. Do not attempt to remove it from the product. Also if the product is swelling, such as if the internal battery is swelling, do not attempt to remove or press in the back cover (back part). Doing so might cause fire, burns, injury, etc.
Do not wet with water or other liquids (drinking water, sweat, seawater, pet urine, etc.). Doing so might cause fire, burns, injury, electric shock, etc. For waterproof property, refer to the following. zP.9 “Notes on Waterproof, Dustproof and Shock-resistant Properties”
Do not let water or other liquids (drinking water, sweat, seawater, pet urine, etc.) enter the charging terminals or external connection jack. Doing so might cause fire, burns, injury, electric shock, etc. For waterproof property, refer to the following. zP.9 “Notes on Waterproof, Dustproof and Shock-resistant Properties”
Use the optional products specified by au. Not doing so or using those with unclear manufacturer, distributor, or specifications may cause fire, burns, injuries, or electric shock.

WARNING

Prohibited Prohibited Prohibited

Do not drop, stomp, throw or subject to excessive force or strong impact/vibration. Doing so might cause fire, burns, injury, electric shock, etc.
Do not let conductive materials (metal strip, pencil lead, etc.) come into contact with the charging terminals or external connection jack. Do not let dust enter them. Doing so might cause fire, burns, injury, electric shock, etc.
Do not cover or wrap with bedding, etc. while using or charging. Doing so might cause fire, burns, etc.

Wetting with water prohibited
Instruction Instruction
Instruction
Instruction

When cleaning the product, be careful not to allow disinfectant or moisture to come into the gaps of the product, external connection jack, earphone/ microphone jack, earpiece, mouthpiece/ microphone, sub microphone, or speaker. The product is damaged and may cause injuries or electric shock, etc.
If charging is not completed after the specified charging time, stop charging. Failure to do so might cause fire, burns, injury, etc. due to overcharge or for other reasons.
Make sure to turn off or stop charging the product before you get close to places where a flammable gas or dust can be generated. Using the product in places where a flammable gas can be generated may cause an explosion or fire.
Follow the instructions given by the respective institution regarding the use of the product in a gas station. Do not charge the product in a gas station. Be careful not to drop the product in a place like a gas station, especially when you put gas into a vehicle. Using the product in places where a flammable gas can be generated may cause an explosion or fire.
Perform the following operations carefully while using, charging, or keeping the product if there are odors, noise, smoke, overheating, discoloring, deformation, or other abnormalities. · Remove the power plug of the specified charger (sold
separately) from the wall outlet. · Turn the product off. Not doing so may cause fires, burns, bodily injury, electric shock, etc.

CAUTION

Prohibited Prohibited Prohibited
Prohibited Prohibited
Instruction

Do not use if broken. Doing so might cause fire, burns, injury, etc.
Do not place on a wobbly table, sloped surface, or other unstable location. Be especially careful when the product is set to vibrate. Doing so might allow the product or its related products to fall and cause injury, etc.
Do not use or store in places subject to excessive dust, high humidity, or high temperatures. Doing so might cause fire, burns, electric shock, etc. For waterproof and dustproof properties, refer to the following. zP.9 “Notes on Waterproof, Dustproof and Shock-resistant Properties”
For use by a child, explain instructions and supervise use. Doing so may cause accidental swallow, injuries, or electric shock.
Do not store the product within the reach of small children or access of pet animals. Be careful especially when storing small parts such as the SIM card/microSD memory card tray, etc. Doing so may cause accidental swallow, injuries, or electric shock.
Be careful when using the product continuously for a long time or charging as it gets hot. Be careful of contacting with the product continuously by putting the product in a pocket of clothes or falling asleep etc. The product or specified charger (sold separately) may become hot when using for a long time such as applications, calling, data communication, watching videos, or while charging. Depending on your physical predisposition and physical condition, contacting with a high temperature part may cause skin redness, itching, rash, or low-temperature burns.

Main Unit

DANGER

Prohibited Prohibited
Instruction

Do not throw into a fire or apply heat. Doing so might cause fire, burns, injury, etc.
Do not apply excessive force such as sticking a sharp-edged tool (nail, etc.) into the product, hitting it with a hard tool (hammer, etc.), or stepping on it. Doing so might cause fire, burns, injury, etc.
If the substance inside the product comes into contact with your eyes or mouth, immediately rinse the area with clean water, and then see a doctor right away. Not doing so may cause loss of sight or poor physical condition due to the influence of the substance, etc. inside the product.

WARNING

Prohibited Prohibited Prohibited Prohibited
Prohibited Prohibited

Do not shine mobile light close to eyes. Maintain a safe distance, especially from small children. Doing so might cause visual impairment or other problems; might temporarily affect eyesight or startle, leading to injury or other accident.
Do not point the mobile light at drivers. Doing so might hinder driving performance, leading to an accident.
Do not view the screen for a long period when it is flickering. Doing so might cause spasms, loss of consciousness, etc.
Do not let water or other liquids (drinking water, sweat, seawater, pet urine, etc.) or a foreign object (metal strip, flammable material, etc.) enter the SIM card/microSD memory card slot. In addition, insert the SIM card or microSD memory card into correct openings in correct orientation. Doing so might cause fire, burns, injury, electric shock, etc.
Do not expose the camera lens to direct sunlight for an extended period. Doing so might cause fire, burns, injury, etc. due to the light-collecting mechanism of the lens.
Do not stare into the proximity sensor. Doing so might temporarily affect eyesight and lead to an accident.
EN60825-1:2014

CLASS 1 LASER Product

Prohibited

Do not emit a beeping sound at close range. Doing so may cause hearing impairment such as hardness of hearing, etc.

Instruction

Turn off the product or set it to Airplane mode before boarding an airplane. Since use of the product on airplanes is restricted, follow the instructions given by the respective airlines. Failure to do so might adversely affect an airplane’s electronic device. If you engage in a prohibited activity while using the product on an airplane, you might be punished by law.

Instruction

Regarding the use of the product in a hospital, follow the instructions given by the respective medical institution. Turn off the product in areas where the use of cell phones is prohibited. Failure to do so might adversely affect the operation of electronic devices and electronic medical devices due to radio waves.

Instruction

When using the handsfree call, loud ringtone is ringing, or in the standby mode, be sure to keep the product off of the ears. Also, when playing games, video, or music with an earphone microphone connected to the product, adjust the volume to the proper level. When using the handsfree call, note that the speaker may emit loud sound. Ringtone or alarm sound can be heard even in the standby mode. Turning the sound on with the volume set too loud or using the product continuously for a long time may adversely affect your ears. Doing so may prevent surrounding sound from being heard, causing an accident.

Instruction

If you have a weak heart, be careful when setting the ringtone vibration and incoming volume. Sudden ringtone vibration and ringtone surprise you, it may cause harmful effect on heart.

Instruction

To use electronic medical equipment, check with electronic medical equipment manufacturer or vendor to determine how devices are affected by radio waves before using. Radio waves may affect the performance of electronic medical equipment.

Instruction

Turn the product off near high-precision electronic control equipment or electronic equipment using low-power signals. Not doing so may cause the equipment to fail or malfunction due to the product’s signals. * Examples of electronic equipment to avoid: a hearing aid, an implanted pacemaker, an implanted cardioverter-defibrillator, other electronic medical equipment, or other automatic control devices, etc. To use an implanted pacemaker, an implanted cardioverter-defibrillator, or other electronic medical equipment, check with electronic medical equipment manufacturer or vendor to determine how devices are affected by radio waves before using.

Instruction

When the display or camera lens is accidentally broken, be careful of broken parts or exposed internal parts of the product. Not doing so may cause burns, injuries, or electric shock with damaged parts or exposed parts.

Instruction

If the internal battery leaks or there is abnormal odor, discontinue use immediately and keep sources of flame away. Leaked fluid may catch fire, causing the battery to ignite, burst, etc.

Instruction

Do not let your pet bite the product. Doing so might cause the internal battery to ignite, burst, overheat, or leak, leading to fire, burns, injury, etc.

CAUTION

Prohibited Prohibited Prohibited
Prohibited

Do not swing the product around by holding strap, etc. Doing so may cause an accident.
When using the motion sensor and electromagnetic sensor, make sure of the safety around you and hold the product firmly; do not swing with excessive force. Failure to do so might cause injury or other accident.
If the display breaks and internal substances leak, do not let them come into contact with skin (face, hands, etc.) or clothes. Doing so might cause eye or skin damage, etc. If internal substances get in eyes or mouth or if they come into contact with skin or clothes, rinse with clean water immediately. In case of contact with eyes or mouth, consult a doctor immediately after rinsing.
Do not dispose of the product with regular trash. Doing so might cause fire, burns, injury, etc. or might adversely affect the environment. When the product is no longer needed, take it to an au Style/au shop, or follow the local regulations regarding collection of the product.

Prohibited
Instruction Instruction Instruction Instruction

If substances in the internal battery leak, do not let them come into contact with skin (face, hands, etc.) or clothes. Doing so might cause eye or skin damage, etc. If internal substances get in eyes or mouth or if they come into contact with skin or clothes, rinse with clean water immediately. In case of contact with eyes or mouth, consult a doctor immediately after rinsing.
To use the product in car, check with automobile manufacturer or dealer to determine how vehicle devices are affected by radio waves before using. In rare cases, using the phone in some vehicle models can cause the vehicles electronic equipment to malfunction. In that case, stop using the product immediately.
If you feel any skin abnormalities associated with use of the product, discontinue use and consult a doctor immediately. Use of the product might cause itchiness, skin irritation, rashes, etc. depending on your physical condition. For the materials used for parts of the product, refer to “Material List (zP.7)”.
The earpiece, camera, periphery of mouthpiece/ microphone, and the speaker have magnetic parts; make sure that no metal strip (a craft knife blade, staple, etc.) is adhered. Metal strip on the product might cause injury, etc.
See the display in a sufficiently bright place at a reasonable distance. Seeing in a dark place or at a close distance might deteriorate vision or cause other problems.

Charger

WARNING

Prohibited Prohibited Prohibited
Prohibited Prohibited
Prohibited
Prohibited
Wet hands prohibited Instruction

Do not use the specified charger (sold separately) if the cord is damaged. Doing so might cause fire, burns, electric shock, etc.
If you hear thunder, do not touch the specified charger (sold separately). Doing so might cause electric shock, etc.
Do not short-circuit the charging terminals when the charger is plugged into the outlet. In addition, do not let your hand, finger or any other part of your body come into contact with the charging terminals. Doing so might cause fire, burns, electric shock, etc.
Do not place a heavy object on the cord of the specified charger (sold separately); do not apply excessive force by pulling, etc. Doing so might cause fire, burns, electric shock, etc.
When plugging/unplugging the specified charger (sold separately) into/from the outlet, keep metal objects away. Failure to do so might cause fire, burns, electric shock, etc.
Do not connect the voltage converter (such as a travel converter for overseas travel) to the specified charger (sold separately). Doing so may cause ignition, overheating, or electric shock.
When the specified charger (sold separately) is connected to the product, do not apply excessive force to the connection. Doing so might cause fire, burns, injury, electric shock, etc.
Do not touch the cord, charging terminals or power plug of the specified charger (sold separately) with wet hands. Doing so might cause fire, burns, electric shock, etc.
Use at the specified power supply voltage. When charging the battery overseas, use the specified charger (sold separately) designed for overseas use. Use at other power supply voltages might cause fire, burns, electric shock, etc. AC adapter: 100 V AC (connect to a household AC outlet only) AC adapter designed for overseas use: 100 V AC to 240 V AC (connect to a household AC outlet only)

Instruction

Wipe off dust on the power plug of the specified charger (sold separately). Using the charger when dust is on plug might cause fire, burns, electric shock, etc.

Instruction

Plug the specified charger (sold separately) into the outlet firmly. Failure to do so might cause fire, burns, electric shock, etc.

Instruction

When unplugging the power plug of the specified charger (sold separately) from the outlet, hold the charger body and pull, without forcefully pulling the cord. Pulling the cord of the specified charger (sold separately) may damage the cord, causing fire, burns, electric shock, etc.

Instruction

When inserting/removing the specified charger (sold separately) into/from the product, insert/ remove it straight into/from the jack, without forcefully pulling cord. Inserting/removing in an incorrect orientation might cause fire, burns, injury, electric shock, etc.

Instruction

If the charging terminals become bent or deformed, discontinue use immediately. In addition, avoid using the charger by restoring the terminals to their original state. Failure to do so might cause fire, burns, injury, electric shock, etc. due to short-circuiting of the charging terminals.

Disconnect plug from power outlet

Unplug the power plug of the specified charger (sold separately) from the outlet when not in use. Leaving the power plug plugged in might cause fire, burns, injury, electric shock, etc.

Disconnect plug from power outlet

Immediately remove the power plug of the specified charger (sold separately) from the outlet if water or other fluids (drinking water, perspiration, seawater, urine of pet animals, etc.) get on the adapter. Failure to do so might cause fire, burns, electric shock, etc. due to short-circuiting caused by substances above.

Disconnect plug from power outlet

Before cleaning, unplug the power plug of the specified charger (sold separately) from the outlet. Cleaning without unplugging the power plug might cause fire, burns, electric shock, etc.

CAUTION

Prohibited

Do not touch the specified charger (sold separately) continuously when it is plugged into the outlet. Doing so might cause burns, etc.

SIM Card

CAUTION

Instruction

Be careful of the cut surface when handling the SIM card as it may damage a part of your body such as fingers, etc. The cut surface may cause injuries with adhered metal pieces.

Use near Medical Devices and Inside Medical Facilities

WARNING

Instruction Instruction

If you are using an electronic medical device such as an implanted pacemaker or implanted cardioverter-defibrillator, carry or use the product at least 15 cm away from where the device is. Radio waves might adversely affect the operation of the electronic medical device.
Before using an electronic medical device other than an implanted pacemaker or implanted cardioverter-defibrillator outside a medical institution (for home treatment, etc.), check with its manufacturer on radio wave effects. Radio waves might adversely affect the operation of the electronic medical device.

Instruction Instruction

In a situation where you may not be able to maintain a distance of at least 15 cm from other persons, such as when your movement is restricted, disable radio wave emission by setting Airplane mode, turning off the product, etc. There may be persons with an electronic medical device such as an implanted pacemaker or implanted cardioverter-defibrillator nearby. Radio waves might adversely affect the operation of the electronic medical device.
Regarding the use of the product in a medical institution, follow the instructions given by the medical institution. Failure to do so might adversely affect the operation of electronic medical devices due to radio waves.

Material List

Main Unit (SHG12)

Part Display surface Back
Exterior
Voice search button, Volume button (UP/ DOWN), Power button Phone button, Home button, Mail button Periphery of Phone button, Home button, Mail button Screen for earpiece, Mobile light, Camera fringe Camera panel
Periphery of earphone microphone jack (inner side), Periphery of external connection jack (inner side) SIM card/microSD memory card tray (exterior) SIM card/microSD memory card tray Seal on SIM card/ microSD memory card tray Fingerprint sensor Screen for speaker

Material Reinforced glass PC resin PBT resin (containing glass) Aluminum
PMMA PMMA + PC resin
PC resin
Reinforced glass PBT resin (containing glass)
PC resin (containing glass) POM resin Silicon rubber
Epoxy resin Polyester resin

Surface treatment AF coating Coating, print, hard coating Coating, hard coating Anodizing
–
Hard coating
–
AF coating, AR coating Coating, hard coating
Coating, hard coating
–
–
Hard coating –

Handling Precautions
These precautions are provided to prevent product faults and to ensure that performance can be fully demonstrated. Thoroughly read these precautions for proper use.
Precautions Common to the Main Unit, Internal Battery, Charger, SIM Card, Peripheral Devices
Do not apply excessive force to the product during use. Be sure not to put the product into a tightly packed bag or place a heavy object on the product in a bag. Sitting on the product in a pocket might damage the display or internal circuit board resulting in a malfunction. Keeping an external device connected to the external connection jack might damage the connector resulting in a malfunction. Such damage and malfunction are not covered by the warranty, even if there is no external damage.
To ensure waterproof and dustproof properties (equivalent to IPX5, IPX8 and IP6X) of the product, use the product with the SIM card/ microSD memory card tray securely closed. Note that the waterproof and dustproof properties are not guaranteed in all circumstances. Do not let foreign objects such as liquid or dust enter the product or attach foreign objects such as liquid or dust to the charger or optional accessories. Do not open/close the SIM card/microSD memory card tray in the rain or with water drops on the surface of the product. Doing so might cause water ingress resulting in internal corrosion. Malfunctions determined to be caused by water seepage are not covered by the warranty.

Do not use any of the following in extremely hot, cold or humid places. (Use within an ambient temperature range of 5°C to 35°C and humidity range of 35% to 85%.) · Main unit · SIM card (inserted into the main unit) For notes when using the product in a bathroom, refer to “Precautions when using the product in a bathroom (zP.9)”.
Do not use any of the following in extremely hot, cold or humid places. (Use within an ambient temperature range of 5°C to 35°C and humidity range of 35% to 85%.) · Charger · Peripheral devices
Do not use in places subject to lots of dust or vibration. Doing so might cause a malfunction.
Clean the product with a soft dry cloth (such as the type used for eyeglasses). Forceful rubbing with a dry cloth may scratch the display. The display may be stained if splash or smear is left attached to the surface. Wiping the product using alcohol, thinner, benzine, detergent, glass cleaner, etc. might erase the printing on the outer casing or cause a fault.
You can wipe the product with an alcohol disinfection sheet. We had a wiping test to check chemical resistance of the product using cloths applying the chemical (ethanol 70%) to them. We have confirmed that the product is not discolored, faded, or peeled off appreciably after the test assuming that it is wiped with an alcohol disinfection sheet. However, as we confirmed the product performance under the test environment, we do not guarantee that the product is not discolored, faded, peeled off, or deformed.
Be careful of the following when using an alcohol disinfection sheet. · Before wiping the product, turn off the display in advance to avoid false operation. · Wring out the alcohol disinfection sheet until the solution does not drip from the sheet to prevent moisture or liquid from entering the gaps or openings of the product. · Wipe the product surface gently. · Check the precautions of the alcohol disinfection sheet you use in advance. · Note that using alcohol may accelerate the deterioration of the existing scratches or dents on the painted surface.
Use as far away as possible from landline phones, TVs and radios. Use nearby might affect them.
The product may become warm while charging or during operations. This is normal.
Do not place near corrosive chemicals or in places where corrosive gas is generated. Doing so might cause a fault.
Do not use outside when you hear thunder. There is a risk of lightning strikes and electric shock.
Be sure to use only the specified peripheral devices. Use of other peripheral devices might cause a malfunction.
Do not put the product in a cooking apparatus such as microwave oven or a pressure vessel. Doing so might cause a malfunction.
The customer is not allowed to disassemble, modify or repair the product. Doing so might cause a fault. In addition, modification of the product is in violation of the Radio Law and/or the Telecommunications Business Law.
Do not allow a part of your body such as finger or conductive foreign objects (metal fragments, pencil leads, etc.) to come into contact with or to enter the external connection jack or earphone/ microphone jack. Doing so might cause a malfunction.
In the event that the product gets wet while charging, immediately disconnect the plug of the specified charger (sold separately).
Do not use the product while driving a car or riding a motorbike or bicycle or while walking. Use of a cell phone while driving a car or riding a motorbike is prohibited by law. Use of a cell phone while riding a bicycle may be punishable by some regulations.
Using or charging the product in a bag or when it is covered with bedding might cause a malfunction.
When using a charging equipment or an external device, insert/ remove the connector straight to/from the terminal. Make sure the orientation of the connector is correct. Unless it is correct, it might cause a malfunction.
Do not expose the camera lens to direct sunlight for an extended period. Doing so might cause a malfunction.
Do not use, store, and leave the product in places subject to direct sunlight (e.g. in automobiles), places that get hot, places that get extremely cold, and in humid or dusty places. Doing so might cause a malfunction.
Do not place the product on an unstable or inclined platform. Be careful especially while charging or when vibrator is set. The product might fall and cause a malfunction etc.
Do not exceed the rating of outlet or wiring device when charging the product, for example, by starburst connection etc.
When the product becomes warm during use, the screen brightness or some of its functions may be restricted.
Main Unit
The battery is built into the product and it is not user replaceable. For replacing the battery, contact an au Style/au shop or Customer Center.
Do not forcefully press, tap or intentionally subject the display to strong impact. Doing so might cause scratching or damage.
Do not forcefully press sharp objects or hard objects against buttons or display surface. Doing so might cause scratching or damage.
7

Never use the product if it is modified. Use of a modified device violates the Radio Law and/or the Telecommunications Business Law. To view the unique authentication and standard marks (including certification/authentication numbers) for the product, perform the following operations. Home screen [Apps] [Simple Settings] [All settings menu] [About phone] [Regulatory labels] The product has acquired the certification of conformity with technical regulations for the specified radio station based on the Radio Law and certification of conformity with technical regulations for the terminal based on the Telecommunications Business Law, and the “Technical Conformity Mark ” can be found in the product as a certificate. View contents of electrical certificates in the product for information on certification. If any of the internal components of the product is modified, the certification of conformity with technical regulations will become invalid. Never use the product without the valid certification. Doing so violates the Radio Law and/or the Telecommunications Business Law.
Take care not to place magnetized items such as magnetic cards, speakers and TV sets near the product, as it might cause malfunction. Placing strong magnetism close to the product might cause false operation.
Do not bring the product close to magnetized objects such as cash cards, credit cards, and prepaid cards. Doing so might result in loss of saved data.
When putting the product in a pocket or bag, keep the display away from metal objects and other hard objects to prevent scratches and damage.
When suddenly brought into a warm place from a cold place, or when in a humid location, or when used where temperature suddenly changes (e.g. near the air discharge port of an air conditioner), water drops (i.e. condensation) might be formed inside the product. Note that when used under conditions such as this, humidity might cause corrosion or a fault.
Do not forcibly insert or remove a microSD memory card. Doing so might injure your hand or finger.
While writing/reading data to/from a microSD memory card, do not subject the product to vibration or impact or turn off the power. Doing so might cause loss of data or a fault.
Do not cover the brightness sensor with your finger or place a sticker, etc. on it. Doing so may hinder the brightness sensor from detecting the ambient light level and the sensor may not work correctly.
Do not place a sticker, etc. on the proximity sensor. Doing so may cause the sensor to malfunction and the display may remain turned off while making a call or during a call, making it impossible to operate the product.
Covering the earpiece, mouthpiece/microphone, speaker, or air vent (mobile light area) with a sticker, your finger, etc. may hinder the performance of the product.
If you hold the product to talk with your hair covering your ear, the proximity sensor may malfunction. This may cause the display to remain on, allowing the call to be disrupted if the display is accidentally touched.
If the display breaks, discontinue use immediately and contact an au Style/au shop or Repair and Delivery Support Center. Continued use may cause injury.
Placing a sticker, etc. on the display or a button may cause malfunction or shorten the usage time. Doing so may also damage the product.
If you place magnetized objects close to the product, the speaker may emit sounds. This is not a fault.
Note that forcibly pulling or applying excessive force to the SIM card /microSD memory card tray may damage it.
The display may be hard to see in bright places such as under the direct sunlight. This is not a fault.
Normally, use the product with the SIM card /microSD memory card tray closed. If the tray is open, dust or water may get inside causing a fault.
Do not let liquids, metal objects or other foreign objects enter the SIM card tray slot or microSD memory card slot. Doing so might cause a fault.
Do not give strong impact on the product such as dropping, throwing, stomping. Doing so might cause a malfunction.
Do not put the product directly on sand at a beach etc. Sand or other small particles might get inside the earpiece, mouthpiece/ microphone, speaker, or earphone/microphone jack causing the volume to drop. If sand gets inside the product, it might cause a malfunction.
Touch Panel
The touch panel is designed to be lightly touched by fingers. Do not apply strong pressure to the touch panel with your fingers or press sharp-pointed objects (such as ballpoint pens and pins) against it. The touch panel may not respond or may malfunction in the following cases. · Operation with gloved hands · Operation with fingernails · Operation with a foreign object left on the touch panel · Operation with a protective film or sticker on the touch panel · Operation with water drops or condensation on the touch panel · Operation with wet or sweaty fingers · Operation under water
8

Placing a sticker or sheet (e.g. a commercially available protective film, peep prevention sheet) on the display might hinder correct operation of the touch panel.
When carrying the product in a pocket or bag, take care not to put the touch panel close to metals or other conductive materials; doing so might cause the touch panel to malfunction.
Internal Battery
(The internal battery of the product is a lithium-ion battery.) The internal battery is not fully charged at the time of purchase. Charge it before using the product. In addition, charge the battery after a long time of disuse before using the product. Use of the product in very hot or cold environments, for example,
leaving it in a vehicle with the windows closed in summer, will decrease the internal battery capacity and shorten the available battery usage time. This will also shorten the internal battery’s life. Try to use the product at room temperature whenever possible. The internal battery gradually discharges after charging even if the product is not used. The internal battery may discharge completely after a long period of disuse. It is recommended you charge it before using the product. Depending on the usage, the internal battery may swell up near the end of its life. This is due to the properties of lithium-ion batteries, and does not affect safety. The internal battery is a consumable item. If its performance has deteriorated and does not recover, for example, if the usable time is extremely short even after charging, or the internal battery is bulging, the internal battery is at the end of its life; discontinue use. Since the battery is a built-in type, its replacement requires submission of the product to an au Style/au shop, etc. for a paid repair. In addition, you may not be able to use the product for a certain period. Note that the internal battery’s life varies depending on the usage, etc. To avoid decreasing the performance and life of the internal battery, do not store the product in the following conditions: · The battery is fully charged (immediately after charging is
complete) · The battery has run out (too low to turn on the product) · In extremely hot or humid conditions
Charging equipment Do not wrap the power cord of the specified charger (sold
separately) around the adapter itself. Do not bend the joint of the plug or connector and the power cord of the specified charger (sold separately) forcibly. Do not place heavy objects on the cord of the charger, or do not apply unreasonable force such as pulling. Doing so might cause a malfunction. When unplugging the plug of the specified charger (sold separately) from the outlet, hold and pull the power plug. If you pull the cord, the cord might be damaged.
SIM Card Do not forcibly remove or insert the SIM card. Be careful not to
apply excessive force when inserting the card into the product. You are responsible for any damage caused by inserting the SIM
card into other devices such as an IC card reader/writer. Do not place a sticker, etc. on the SIM card. Do not insert your SIM card with a conversion adapter attached.
Doing so might cause a fault. Do not subject the SIM card to actions that can damage it (using in
hot places, throwing in a fire, letting a foreign object come into contact with the metal contacts, subjecting to impact, bending or pressing, wetting, etc.). Doing so might erase data or cause a fault.
Camera If the camera lens breaks, discontinue use immediately and
contact an au Style/au shop or Repair and Delivery Support Center. Continued use may cause injury. Test the camera before shooting special moments. Do not use the camera in places where shooting is prohibited.
Copyrights and Portrait Rights If the data you shot or recorded using the product or the data you
downloaded from the Internet, etc. is in part or in whole protected by the third party’s copyright, you are not allowed to copy, distribute, publicly send, or modify the data without the consent of the copyright holder, except for personal use, under the copyright law. In addition, do not use or modify portraits or names of other individuals without their consent, as it may infringe on portrait rights. Note that shooting and recording may be restricted at some live performances, shows and exhibitions, even for personal use. Be careful about copyrights and portrait rights when posting still pictures you shot, etc. on websites.
Back Up Contents of the Product Back up important contents of the product’s memory. They may
be lost or altered due to unpredictable factors such as static electricity and a fault, or by repair, mishandling, etc.

Notes on Waterproof, Dustproof and Shock-resistant Properties
Thoroughly read the precautions described in “Notes on Waterproof, Dustproof and Shock-resistant Properties” for proper use. Failure to observe the precautions may cause ingress of liquid or dust, resulting in overheating, ignition, electric shock, injury or a fault. Note that proper operations of the product are not guaranteed in all circumstances. Faults determined, after an inspection, to be caused by mishandling by the customer such as using the product without observing the precautions described in “Notes on Waterproof, Dustproof and Shock-resistant Properties” are not covered by the warranty.

Waterproof, Dustproof and Shockresistant Properties of the Product

The product has a protection rating (JIS C 0920) for waterproof property equivalent to IPX5*1 and IPX8*2, as well as dustproof property equivalent to IP6X*3 on the condition that the SIM card/ microSD memory card tray is securely closed (based on the experiments by the Company). And the product has a shockresistant structure that meets the MIL-SPEC*4. *1 IPX5 means that the cell phone continues to function as a phone after
being subjected to a water jet (approximately 12.5 liters/min) discharged from a water pouring nozzle (inner diameter: 6.3 mm), from all directions and approximately 3 meters away from the cell phone for at least 3 minutes. *2 IPX8 means that the cell phone continues to function as a phone after being gently lowered into a tank filled with still tap water (at room temperature) to the depth of 1.5 meter, immersed at the bottom for approximately 30 minutes and then taken out of the tank. *3 IP6X means that the cell phone securely continues to its function of no grit and dust getting inside the main unit even after it has been placed in an apparatus with grit and dust (diameter: 75 m or less) and shaken for 8 hours. *4 MIL-SPEC Testing was conducted in accordance with MIL-STD-810H Method formulated by the U.S. Department of Defense.

Test item

Test detail

Shockproof (drop) Tested by dropping from about 1.22 m in 26

directions onto steel plate

· Performance of the product is confirmed at under the test environment, it does not guarantee all operations of actual use in every situation. Also, it does not guarantee the non-damage and trouble-free.

Examples of Waterproof and Dustproof Properties of the Product
· The product can be used at the poolside. However, do not wet it with water other than tap water such as pool water or submerge it in pool water.
· The product can be washed with a low-pressure flow of tap water (up to 6 liters/min) at room temperature (5°C to 35°C).

Handling the Product
· Close the SIM card/microSD memory card tray securely. The waterproof and dustproof properties are ensured when it is securely closed. Even a small object (hair, sand, tiny fiber, etc.) trapped between contact surfaces may cause ingress of liquid or dust.
· If liquid such as water is splashed onto the product with the SIM card/microSD memory card tray opened, the liquid may enter it, causing electric shock or a fault. Discontinue use and turn off the power and then contact your local au Style/au shop or Repair and Delivery Support Center.
· When the product is wet, wipe it with a dry, clean cloth. · When your hand or the product is wet or a foreign object is
adhered to it, never open/close the SIM card/microSD memory card tray. · The product is only resistant to fresh/tap water at room temperature (5°C to 35°C). If you let the product get wet with or submerged in liquids other than fresh/tap water at room temperature, discontinue use and wash it with fresh/tap water at room temperature. · Do not use the earphone/microphone jack or external connection jack when it is wet or sand or dust is adhered to it. Doing so may impair the waterproof and dustproof properties or cause electric shock, short circuit, etc. resulting in fire, burns, or a fault.

How to Close the SIM card/microSD Memory Card Tray Insert the SIM card/microSD memory card tray into the main unit to the end horizontally. · Press the parts firmly and make sure that there is no gap
between the main unit and the card tray.
Dustproof Property of the Product · The dustproof property of the product only guarantees a protection
rating equivalent to IP6X and does not guarantee its performance under other circumstances such as when the product is directly placed on sand at a beach, etc. · If dust is adhered to the product, immediately wash it away with water or otherwise clear it completely before use.
Notes on Using the Product
· Do not let the product get wet with or submerged in liquids other than tap water (seawater, pool water, spa water, soapy water, detergent solutions, bubble baths, juice, alcohol, condiments, etc.). In addition, do not use the product in places subject to pet urine. If the product gets exposed to such liquids, wash away with tap water immediately.
· Wash away salt water, seawater, drink, condiments, food, mud, soil or any other foreign object immediately. If allowed to dry, it will be difficult to remove the residue and may cause scratching or a fault.
· Wash away sand, mud, etc. completely; any residue may scratch or damage the product, or otherwise cause a fault.
· Do not immerse the product in a bathtub or swimming pool. In addition, do not use it under water (including button operations).
· The product is not designed to resist water pressure. Do not expose the product to a high-pressure flow of tap water, shower, etc. (6 liters/min or more) or submerge it under water.
· Do not expose the product to hot water or hot air from a hair dryer, etc. or use it in saunas. The product is not heat resistant.
· Extreme temperature changes may cause condensation, resulting in a fault. Wait until the product reaches room temperature before you bring it from a cold place into a warm place. If condensation occurs, leave the product in room temperature until the condensation evaporates.
· Do not use or store the product in humid places such as a bathroom or kitchen for an extended period.
· The product does not float on water. · Do not use the product in heavy rain. · Do not leave the product wet. Doing so in cold places might cause
the liquid/moisture to freeze, resulting in a fault. · Ingress of water into the earpiece, mouthpiece/microphone, or
speaker may lower the volume temporarily. Drain water and dry the product well before use. · Do not place the product directly on sand at a beach, sandbox, etc. or on mud. Sand may enter the earpiece, mouthpiece/ microphone, speaker, earphone/microphone jack, etc., causing the volume to drop. Letting sand or other small particles enter the main unit might cause overheating or a fault. · If the SIM card/microSD memory card tray is worn or damaged, the waterproof and dustproof properties cannot be maintained. · Do not drop or subject to impact. In addition, do not poke the earpiece, mouthpiece/microphone, speaker, sub microphone, etc. with a sharp object. Doing so might damage or deform the product, resulting in impairment of the waterproof and dustproof properties.
Precautions when using the product in a bathroom · Do not let the product submerged into or get wet with hot water of
a bathtub or hot spring or water containing soap, detergent or bath powder. Doing so might cause a fault. If liquid other than tap water is attached on the product, you fall the product into the bathtub, etc., immediately rinse the product in the specific procedure and drain water or dry the product naturally. · Use the product within 2 hours continuously in a bathroom with a temperature of 40°C or less and a humidity of 99% or less. After that, be sure to drain water or dry the product naturally in the specific procedure. All function’s continuous operations are not completely guaranteed. · Take care not to get the product wet with high temperature water. · The rapid changes of temperature may cause condensation. Wait until the product reaches room temperature before you bring it from a cold place into a warm bathroom, etc. Also, do not get the warmed product wet with cold water in a bathroom. Doing so might cause water intrusion or a fault.
9

· If condensation occurs inside the camera lens or display, leave it in room temperature until the condensation is removed.
· Do not use the product connected to an earphone/microphone or external device in a bathroom.
· Do not charge the product in a bathroom.
Maintaining the Waterproof and Dustproof Properties
Rubber Seal The rubber seal on the SIM card/microSD memory card tray is important to maintain the waterproof and dustproof properties. Observe the following: · Do not remove or scratch it. · When closing the SIM card/microSD memory card tray, do not get
the rubber seal caught. In addition, do not insert a sharp object into gaps around the SIM card/microSD memory card tray, the earphone/microphone jack or external connection jack. Doing so may damage the rubber seal, causing ingress of liquid or dust. · To maintain the waterproof and dustproof properties, it is recommended that you replace the parts once every two years regardless of their condition (paid service). For information on part replacement, contact your local au Style/au shop.
Precautions on Charging
The specified charger (sold separately) and optional accessories are not waterproof/dustproof. Be sure to check the following before and after charging. · Check that there is no water drop or foreign object on the product.
If a foreign object is adhered to the product, wash it away immediately. In addition, if the product is wet, drain water well and wipe it with a dry, clean cloth, etc. before inserting the USB Type-C plug into the external connection jack. · Never connect the USB Type-C plug when the product or specified charger (sold separately) is wet or a foreign object is adhered to it. Although the product is waterproof and dustproof, the specified charger (sold separately) is not waterproof or dustproof. If the USB Type-C plug is inserted while the product or charger is wet or dirty, water or a foreign object on the product or USB Type-C plug might cause electric shock, short circuit or corrosion, resulting in abnormal overheating, burnout, fire, burns or a fault. · Do not touch the specified charger (sold separately) with wet hands. Doing so might cause electric shock. · Do not expose the specified charger (sold separately) or optional accessories to water. Do not use them in places where water is regularly used, such as a bathroom, shower room, kitchen and washroom. Doing so might cause fire, burns, electric shock, a fault, etc. In addition, do not bring them into such places even if you are not using them for charging. Doing so might cause fire, burns, electric shock, a fault, etc.
Washing the Product
If stain, dust, sand, soft drink, etc. is adhered to the surface of the product, gently wipe it off with a cloth and wash the product under a low-pressure flow of tap water (up to 6 liters/min) at room temperature (5°C to 35°C) approximately 10 cm away from the faucet or shower head. Holding the SIM card/microSD memory card tray closed, wash the product with your hands without using a brush or sponge. After washing the product, drain water and then use the product. · Make sure that the SIM card/microSD memory card tray is securely
closed before washing the product. · Do not wash the product in a washing machine or ultrasound bath. · The earphone/microphone jack and external connection jack are
especially susceptible to dust, sand and other particles. Wash it away thoroughly. After washing it away, make sure the jacks are dried off before using the product. Any residue in the jacks may cause a fault. · When cleaning the earphone/microphone jack or external connection jack, do not use tools such as a cotton swab or push a cloth into the jack. Doing so might cause impairment of the waterproof and dustproof properties, resulting in fire, burns, or a fault. · Never put the product in a microwave oven for drying it. Doing so might cause the internal battery to leak, overheat, burst or ignite. In addition, it might cause the product to overheat, emit smoke or ignite, or destroy its circuit components. · Do not expose the product to hot air from a hair dryer or leave it in a high temperature environment for drying it. Doing so might cause the product to deform, discolor, malfunction, etc.

Washing the Product with Hand Soap
· You can wash the product using a form type hand soap for home use which is manufactured by a domestic manufacturer (surveyed by SHARP CORPORATION)*. Do not use other types of detergent, such as an alkaline hand soap, detergent for the tableware, bar soap, powdered soap, etc. * Performance of the product is confirmed under the test environment, therefore, it does not guarantee that all foam type hand soaps can be used for washing.
· Before washing the product, turn the power off completely. · When washing the product, put off your watch, ring, or other
decoration such as artificial nail. Doing so may scratch the product.
How to Wash with Hand Soap
When washing the product, confirm “Washing the Product with Hand Soap (zP.10)” and perform in the following procedure. · Remove the commercially available accessories (terminal cover,
case, strap, etc.). For handling commercially available accessories, refer to the notes of each product.
A Put a foam type hand soap in your hands Put the product on your palm, and then rub the front surface and the back surface with the foam

B Completely rinse off the foam on the front surface, back surface, buttons, etc. of the product

· Rinse off the foam in a position where the distance is approximately 10 cm from the faucet or shower head, with somewhat weak water flow (6 L/min. or less, normal temperature (5°C to 35°C) tap water).
C Rinse the earpiece, speaker, external connection jack, mouthpiece/microphone, earphone/ microphone jack, and sub microphone

Earpiece

Speaker, External connection jack, Mouthpiece/microphone

Earphone/microphone jack, Sub microphone

· If substance of foam hand soap is remained on the earpiece, speaker, mouthpiece/microphone, or sub microphone, may cause deterioration of the sound quality of ringtone or during a call due to clogging. Also, those on the external connection jack or earphone/ microphone jack may cause malfunction such as charging failure. Thoroughly rinse it away.
D Drain water
· For draining water, refer to “Draining Water (zP.11)”. · Dry well and then confirm that there is no water drop remained.

Draining Water
If the product is wet, be sure to drain water from the earpiece, mouthpiece/microphone, speaker, sub microphone, earphone/ microphone jack, external connection jack, Power button, Volume UP/DOWN button, Phone button, Home button, Mail button, Voice search button, Air vent (mobile light area), etc.
A Wipe off water on the surface of the product thoroughly with a dry, clean cloth, etc.

D Leave the product on a dry cloth, etc. for approximately 2 to 3 hours at room temperature to dry it
After wiping off the water, water remaining in the product may seep out, if any. Do not wipe off water trapped in the grooves directly with a cotton swab, etc.
Precautions to be Taken after Water Draining Do not use the product with water drops left on it. · Doing so might cause call failure or wet clothes, bags, etc. · Doing so might cause the earphone/microphone jack, external
connection jack, etc. to short-circuit, causing fire or a fault. · Doing so in cold places might cause the water drops to freeze,
resulting in a fault.

B Hold the product securely and shake it approximately 20 times until there is no more water splashing
Check the safety of your surroundings; while shaking the product, hold it securely so as not to drop it.
Earpiece

Speaker

Mouthpiece/ microphone

External

connection jack

Volume UP/DOWN button

Earphone/ Sub microphone microphone jack

Power button Air vent (mobile light area)

Voice search button
C Pat the product against a dry, clean cloth, etc. to remove moisture from the grooves
Water may be trapped in the openings; put a cloth against them and pat the product to remove the water. Make sure that there is no water or foreign object left in the openings.

Notes on Using Bluetooth®/ Wireless LAN (Wi-Fi®) Functions
Precautions for Bluetooth®
· The Bluetooth® function of the product conforms to the domestic standards of Japan, FCC standards and EC directives, and has been certified.
· In some countries/regions, the use of the Bluetooth® functions may be restricted. If you are using the product overseas, check the relevant laws and regulations of the country/region you visit.
· The 2.4 GHz band used by wireless LAN (Wi-Fi®) and Bluetooth® devices is shared by various other devices. For this reason, Bluetooth® devices use technologies for minimizing effects from other devices using the same radio frequency band. In some cases, however, the communication speed and connectable range may be decreased, or disconnection may occur, due to interference by other devices.
· The communication speed and connectable range vary depending on the distance between communication devices, obstacles and the connected devices used.
Precautions for Wireless LAN (Wi-Fi®)
· The wireless LAN (Wi-Fi®) function of the product conforms to the domestic standards of Japan, FCC standards and EC directives, and has been certified.
· In some countries/regions, the use of the wireless LAN (Wi-Fi®) functions may be restricted. If you are using the product overseas, check the relevant laws and regulations of the country/region you visit.
· Do not use the product in places where electromagnetic waves are generated or near electric products, AV and OA equipment, or other magnetized devices.
· Subjecting the product to magnetic or electrical noise might increase noise or prevent it from performing communications. (The product is particularly susceptible to noise when it is used near a microwave oven.)
· Using the product near a TV, radio or similar appliance might cause reception interference or disrupt TV images.
· Search for access points might not be successful if there are multiple wireless LAN (Wi-Fi®) access points near the product and the same channel is being used.
· The communication speed and connectable range vary depending on the distance between communication devices, obstacles and the connected devices used.
Frequency Band
Bluetooth® and wireless LAN (Wi-Fi®) functions (2.4 GHz band) of the product use frequencies in the 2.4 GHz band ranging from 2.402 GHz to 2.480 GHz. To view information on frequency band and important notices, perform the following operations. Home screen [Apps] [Simple Settings] [All settings menu] [About phone] [Regulatory labels] · Bluetooth® function: 2.4FH/XX8
The product uses the 2.4 GHz band. FH uses FH-SS as the modulation scheme. The interference distance is about 80 m or less. XX8 uses other schemes. The interference distance is about 80 m or less. Bands of mobile unit identification devices cannot be avoided. · Wireless LAN (Wi-Fi®) function: 2.4DS/OF4
The product uses the 2.4 GHz band. DS-SS and OFDM are used as the modulation schemes. The interference distance is about 40 m or less. Bands of mobile unit identification devices can be avoided. Channels available with the 2.4 GHz band wireless LAN (Wi-Fi®) of the product are between 1 and 13. Available channels differ depending on the country. For use on airplanes, check with the respective airlines in advance.

Precautions for Use of Bluetooth® Function The frequencies used by the Bluetooth® function of the product are in the 2.4 GHz band. In this frequency band, in addition to home electrical appliances such as microwave ovens and industrial, scientific and medical devices, other similar wireless stations, in-plant wireless stations for mobile unit identification that require a license for use such as factory production lines, specific small power wireless stations that do not require licenses, and amateur wireless stations (collectively called “other wireless stations” from here on) are operated. 1. Before using the product, make sure that “other wireless stations”
are not in operation nearby. 2. In the event that instances of radio wave interference have
occurred between the product and “other wireless stations,” immediately either relocate the product or stop operation of the device (stop the emission of radio waves). 3. If you are unclear on any points or are troubled by anything, contact an au Style/au shop or Customer Center.
Precautions for Use of 2.4 GHz Band Wireless LAN (Wi-Fi®)
The frequencies used by the wireless LAN (Wi-Fi®) function of the product are in the 2.4 GHz band and 5 GHz band. In the 2.4 GHz frequency band, in addition to home electrical appliances such as microwave ovens and industrial, scientific and medical devices, other similar wireless stations, in-plant wireless stations for mobile unit identification that require a license for use such as factory production lines, specific small power wireless stations that do not require licenses, and amateur wireless stations (collectively called “other wireless stations” from here on) are operated. 1. Before using the product, make sure that “other wireless stations”
are not in operation nearby. 2. In the event that instances of radio wave interference have
occurred between the product and “other wireless stations,” immediately either relocate the product or stop operation of the device (stop the emission of radio waves). 3. If you are unclear on any points or are troubled by anything, contact an au Style/au shop or Customer Center.
Precautions for Use of 5 GHz Band Wireless LAN (Wi-Fi®)
In the 5 GHz band, three types of channels can be used; 5.2 GHz/5.3 GHz/5.6 GHz band (W52/W53/W56). · W52 (5.2 GHz band/36, 40, 44, 48 ch) · W53 (5.3 GHz band/52, 56, 60, 64 ch) · W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132,
136, 140, 144 ch) Using wireless LAN in 5.2 GHz/5.3 GHz outdoors is prohibited by law (except when communicating with a base station of data communication system for 5.2 GHz high power frequency band or relay station).
The connections between this product and all other Bluetooth® and wireless LAN (Wi-Fi®) devices have not been confirmed. Therefore, connections with all Bluetooth® and wireless LAN (Wi-Fi®) devices are not guaranteed.
This product supports security features for wireless communications that are compliant with the Bluetooth® and wireless LAN (Wi-Fi®) standard specifications, but the security may not be sufficient depending on the usage environment and configuration. Be careful when making data communication using Bluetooth® or wireless LAN (Wi-Fi®) function.
Wireless LAN (Wi-Fi®) has the advantage that it can be freely connected anywhere within the radio wave range, as it uses radio waves for exchanging information. At the same time, there is a risk that a malicious third party may obtain unauthorized access if security settings have not been configured. You are recommended to configure security settings before use at your decision and responsibility.
The Company assumes no responsibility for leakage of data or information that may occur during Bluetooth®/wireless LAN (Wi-Fi®) communication.
Since Bluetooth® and wireless LAN (Wi-Fi®) functions use the same frequency band, using the both functions at the same may cause radio wave interference resulting in decreased communication speed or disconnection from the network. If connection fails, stop using either of the Bluetooth® and Wireless LAN (Wi-Fi®) functions.

Osaifu-Keitai® and NFC Reader/
Writer
· The product’s Osaifu-Keitai® and NFC reader/writer function use low-power signals and do not require wireless station licenses.
· It uses 13.56 MHz frequency band. When another Osaifu-Keitai® or NFC reader/writer function is used in the surroundings, keep the product away sufficiently from it. Before using, confirm that there are no radio stations using the same frequency band nearby.
· To use in an airplane, confirm with airline company in advance. Use is limited in some countries. Confirm regulations of the country/region to use it.

Notes on Voluntary Control of Radio Interference
The product conforms to technical regulations pursuant to the Rules for Voluntary Control Measures of VCCI; the corresponding conformity mark is shown on the electronic rating plate on the product. To view the electronic rating plate, perform the following operations. Home screen [Apps] [Simple Settings] [All settings menu] [About phone] [Regulatory labels]

Security Codes/PIN

Security Codes

Various security codes are available on the product. See below for the available security codes. Do not forget them as they are necessary for various operations and contracts. Be sure to change the default values to your own.

Security Code

Usage example
Default value

A To use voicemail service remotely from a landline phone
B To use Customer Center or to make inquiries, subscribe to services, or change your subscription details on the au website
A four-digit number you wrote in the application form

PIN
PIN Code
To prevent unauthorized use of the SIM card by third parties, set the product to require PIN code entry every time the power is turned on. You also need to enter the PIN code when setting whether PIN code entry is required. The PIN code is locked after three consecutive failed entry attempts. Unlock the PIN code using PUK code. · At the time of purchase, the PIN code is “1234,” and PIN code
entry is not required. Change the PIN code to any four- to eight-digit number and set the product to require PIN code entry if necessary. If you set the product to require PIN code entry, be sure to change the PIN code to your own. · PIN code is not reset by initializing the product.
PIN Unlock Key (PUK) Code
Use to unlock the PIN code. · PUK code is an eight-digit number given at the time of purchase. It
is printed on the back of the plastic card on which the SIM card is attached. For details on using an eSIM, refer to the au website. https://www.au.com/support/service/mobile/procedure/id/ pin-code/ (Japanese) · After entering the PUK code, you need to set a new PIN code. · If you enter the wrong PUK code ten times consecutively, you will need to contact an au Style/au shop, Toyota store, or Customer Center.
If the PIN code gets locked, the product may restart for security reasons.

Notes on Data Communication Charge
· Since a constant Internet connection is possible with the product, data communication may be performed automatically by some applications, resulting in high data communication charges. Therefore, subscription to the flat-rate/discount service for data communication charges is recommended.
· To browse websites, download applications, communicate using applications, send/receive e-mails or configure various settings, connection to the Internet is required, to which data communication charge applies.
· To accurately determine current location, smartphones have functionality for automatically obtaining assist data, such as satellite orbital information (data is sent to the service providers of this functionality), and data communication charges may be incurred for obtaining assist data.
Notes on Call Charges
· When you end a call, make sure to disconnect the call. If you forget to disconnect, the call charges may be higher.
Notes on Applications
· Be sure to check the security of the application, then install it at your own risk. Some applications might affect operation of other applications or of the entire product. They might cause virus infection, damage various data, and send out your location information, usage history or personal information stored in your product via the Internet.
· The Company assumes no responsibility for any problems caused by applications you have installed. In such cases, you may be charged a repair fee even during the warranty period.
· The Company assumes no responsibility for any loss or damage suffered by you or any third party as a result of using applications you have installed.
· Some applications may not be used unless a microSD memory card is inserted into the product.
· Some applications keep the display turned on while they are active, or rapidly drain the battery while running in the background.
· Operation procedures and screen appearances of the applications preinstalled in the product and those installed by you are subject to change without notice as a result of version upgrade. In addition, operation procedures described in ” (Kantan Manual)” (Japanese) or ” (Full Instruction Manual)” (Japanese) and on the product may differ from the actual procedures.
Cell Phone Etiquette
Use of Cell Phones is Not Allowed in the Following Places!
· Do not listen to music or watch videos while driving a car or riding a motorbike or bicycle. Use of a cell phone while driving a car or riding a motorbike is prohibited by law. (Use of a cell phone while riding a bicycle may be punishable by some regulations.) Be attentive to traffic around you while walking. Not being able to hear surroundings or looking only at the screen may cause a traffic accident. Be especially careful at railroad crossings, on station platforms, and at crosswalks.
· Use of cell phones on airplanes is restricted. Follow the instructions of each airline.
Be Considerate of People Around You
· Do not make calls in theaters, museums, libraries, or other similar places. Turn power off or turn on manner mode so as not to disturb others around you with your ringtones.
· Do not use the cell phone in places where you might hinder other pedestrians.
· Viewing a cell phone screen while walking is a serious hazard. Do not talk on/operate the cell phone while walking or suddenly stop walking to do so.
· Move to areas where you will not inconvenience others when you talk on the cell phone on bullet trains, in hotel lobbies, etc.
· Refrain from talking on the cell phone in a loud voice. · Check whether sound from earphones, etc. is audible only to
yourself when there are other people around you on a train or in other closed spaces. · Ask for permission before taking photos of other people with the cell phone’s camera. · When using the camera, follow common rules of etiquette regarding camera use. · Some people near you in crowded places such as packed trains may be using a cardiac pacemaker. Turn on “Airplane mode” or turn the cell phone off in such places. · When a medical institution has designated areas where cell phones are not allowed to be used or brought in, abide by the rules.
13

Getting Ready
Names and Functions of Parts
Front/Top/Bottom/Left Side/Right Side

Back

A SIM card/microSD memory card tray
B oVoice search button Use for Google assistantTM.
C Strap eyelet
D Display (touch panel)
E In camera
F Earpiece*1 Hear the other party’s voice during a call or play back absence memos, etc. through this.
G Proximity sensor/Brightness sensor Proximity sensor prevents misoperation of the touch panel during a call. Brightness sensor adjusts the brightness of display according to the ambient light level.
H Notification lamp Illuminates/flashes while charging, etc.
I cPhone button Make/receive calls. Flashes when there is a missed call.
J hHome button Return to the Home screen. Illuminates when surroundings are dark.
K mMail button Send/check mails. Flashes when there is a new mail. · au users can use au-mail (zP.23) and UQ mobile users can use Gmail (zP.23).
L +Volume UP button/|Volume DOWN button Adjust the volume. Set/disable the manner mode or start the emergency buzzer. · For details on the manner mode, refer to “Setting the Manner Mode (zP.21)”.
M pPower button Turn the power on/off, or turn the display on/off. · With the power turned on, press and hold to start the specified application while the Home screen/App list is displayed. For details, refer to “Turning the Power On/Off (zP.17)”.
N Fingerprint sensor Unlock the screen, etc. by fingerprint recognition. · Press and hold to start the specified application while the Home screen/App list is displayed.
O Earphone/microphone jack
P Sub microphone*1 Talk to the other party through this during a handsfree call. Also use while recording videos.
Q Mouthpiece/Microphone*1 Talk to the other party through this during a call. Also use while recording videos or for voice recognition.
R External connection jack Connect peripheral devices such as Type-C common AC adapter 02 (sold separately), USB Type-C cable (commercially available), etc. When Type-C common AC adapter 02 (sold separately), USB Type-C cable (commercially available), etc. is connected, its magnetism may affect the product’s geomagnetic sensor, causing some applications to malfunction. In such cases, remove the connected device.
S Speaker*1 Hear ringtones and alarm sounds.
14

T Out camera U Mobile light
The surrounding gap is an air vent for maintaining product performance*1. V FeliCa mark Place this mark on the reader/writer when using the Osaifu-Keitai® or NFC function. W 5G antenna*2 X Wi-Fi®/Bluetooth® antenna*2 Y 5G/4G/UMTS antenna*2 Z 5G/GPS antenna*2
*1 Covering with a sticker, your finger, etc. may hinder the performance of the product.
*2 Antennas are built into the product. Do not cover the antenna areas with your hand during calls or data communication. Doing so may affect the call/communication quality.
The back cover (back part) cannot be removed. Do not try to remove it forcibly; doing so might cause damage or a fault.
The battery is built into the product and not user removable. To force the power off such as when the display freezes, refer to “Forcing the Power Off (zP.17)”.
SIM Card/microSD Memory Card Tray Note that forcibly pulling or applying excessive force to the SIM
card/microSD memory card tray may damage it. Proximity Sensor/Brightness Sensor Do not place a sticker, etc. on the proximity sensor/brightness
sensor. Doing so might cause the sensor to malfunction. Earphone/Microphone Jack Some types of earphone/microphones or those with a switch
may not be compatible with the product.
Using the SIM Card
SIM
This product supports an eSIM (download-type SIM) and a nanoSIM card. You can select which SIM to use when using mobile data communication, making voice calls, sending SMS, etc.
eSIM
This product supports an eSIM, to which you can register your phone number and other information. Use of an eSIM requires certain settings to be made. · Inquire with the provider of the eSIM for details on making settings
for adding an eSIM. · For details on using an eSIM with au, refer to the au website.
https://www.au.com/support/service/mobile/procedure/sim/ esim/ (Japanese)
SIM Card
The SIM card contains your phone number and other information. SIM lock is disabled for the product.
au Nano IC Card 05
IC (metal) part

Front

Back

Inserting/Removing the SIM Card
Inserting the SIM Card
Be sure to turn the product off before inserting the SIM card. In addition, insert it with the display side facing up.
A Put your fingertip into the groove to pull out the SIM card/microSD memory card tray
B With the IC (metal) side of the SIM card facing down, press the SIM card against the projection of the SIM card/microSD memory card tray to install it
Confirm the orientation of the SIM card and install it on the card tray securely. Install the SIM card so that it does not shift from the card tray; otherwise, it may damage the SIM card or card tray.
Notches
IC (metal)
Projection
C Insert the SIM card/microSD memory card tray into the slot straight against the main unit to the end
Press the parts firmly and make sure that there is no gap between the main unit and the card tray.
Removing the SIM Card
Be sure to turn the product off before removing the SIM card. In addition, remove it with the display side facing up. · For details on removing the SIM card/microSD memory card tray,
refer to “Inserting the SIM Card (zP.15)”.
A Put your fingertip into the groove to pull out the SIM card/microSD memory card tray
When pulling out the tray, be careful not to let the SIM card come off from the card tray and lose it.
B Remove the SIM card from the SIM card/microSD memory card tray
C Insert the SIM card/microSD memory card tray into the slot straight against the main unit to the end

Inserting/Removing a microSD Memory Card
Inserting a microSD Memory Card
Be sure to turn the product off before inserting a microSD memory card. In addition, insert it with the display side facing up. · For details on removing the SIM card/microSD memory card tray,
refer to “Inserting the SIM Card (zP.15)”.
A Put your fingertip into the groove to pull out the SIM card/microSD memory card tray
B With the IC (metal) side of the microSD memory card facing down, press the microSD memory card against the projection of the SIM card/ microSD memory card tray to install it
Confirm the orientation of the microSD memory card and install it on the card tray securely. Install the microSD memory card so that it does not shift from the card tray; otherwise, it may damage the SIM card or card tray.
Projection
C Insert the SIM card/microSD memory card tray into the slot straight against the main unit to the end
Make sure that the top/bottom and front/rear of the microSD memory card are facing correctly. Trying to attach it forcibly may cause damage.
Do not touch the terminal of the microSD memory card.
Removing a microSD Memory Card
Be sure to turn the product off before removing a microSD memory card. In addition, remove it with the display side facing up. · For details on inserting/removing the SIM card/microSD memory
card tray, refer to “Inserting the SIM Card (zP.15)”.
A Put your fingertip into the groove to pull out the SIM card/microSD memory card tray
When pulling out the tray, be careful not to let the microSD memory card come off from the card tray and lose it.
B Remove the microSD memory card from the SIM card/microSD memory card tray
C Insert the SIM card/microSD memory card tray into the slot straight against the main unit to the end
The microSD memory card may become warm after a long period of use. This is not a malfunction.
Unmounting the microSD Memory Card
A Storage screen [This device] [SD card] B [Menu] [Eject] To mount the microSD memory card again: Storage screen [This device] [SD card] [Menu] [Mount].

Charging
Notes on Charging
The internal battery is not fully charged at the time of purchase. Be sure to charge it before using the product. · If the performance of the internal battery does not recover, for
example, if the usable time is extremely short even after charging, the battery may be at the end of its life. To check the charging performance of the internal battery: Home screen [Apps] [Simple Settings] [All settings menu] [About phone] [Battery status] · While charging, appears in the battery indicator. If the product remains connected to the AC 100 V outlet or PC, keeps displayed even after the charge is full (charge is 100%).
The product may become warm while charging. This is normal. The internal temperature of the product may increase depending
on the operation or usage environment, causing the product to become hot. In such cases, charging may stop for safety. Charging may take longer if the product is in use (for the camera or other functions). If you use the product while charging with the specified charger (sold separately), the internal battery may charge and discharge repeatedly in a short time. Frequent charging shortens the life of the battery. If the notification lamp is flashing red, force the power off (zP.17) and turn it back on. If the notification lamp still keeps flashing, stop charging and contact an au Style/au shop or Customer Center. The continuous talk time and continuous standby time (zP.27) are average measurements obtained in strong signal conditions at rest. The actual usable time may be less than half depending on the charge on the battery, usage environment such as temperature or signal reception, function settings, etc. See below for the examples. · Frequent use of the product in places where (out of service
area) appears on the display. · Use of the Wi-Fi® function, Bluetooth® function, mail functions,
camera, location information, etc. · The display is set to remain turned on in applications, etc. · Applications are running in the background.
Charging with the Specified AC Adapter (Sold Separately)
Charge by connecting the Type-C common AC adapter 02 (sold separately). For details on the specified AC adapter (sold separately), refer to “Introduction of Peripheral Devices (zP.27)”.
A Plug the power plug of the Type-C common AC adapter 02 (sold separately) into a 100 V AC outlet
B Insert the USB Type-C plug of the Type-C common AC adapter 02 (sold separately) into the external connection jack of the product in the direction of the arrow
Type-C common AC adapter 02 (sold separately)
AC 100 V outlet

Charging with a PC
Charge by connecting the product to a PC’s USB port that is capable of charging.
A Make sure that the PC is running, and then connect the USB Type-C cable (commercially available) to a USB port of the PC
B Connect the USB Type-C cable (commercially available) to the product
USB Type-C plug External connection jack
USB plug
Charging by USB may take longer than by the specified AC adapter (sold separately).
If you charge the internal battery after it runs out, charge it with the specified AC adapter (sold separately).
If the connected device is compatible with the role swap function If both connected devices are compatible with the role swap function, the role to supply/receive power can be swapped with each other. If you select ON for “Charge connected device” on the USB
Preferences screen which appears when the USB Type-C cable (commercially available) is connected to the product, the product supplies power to charge the other connected device.

External connection jack
USB Type-C plug
C When charging is complete, pull the Type-C plug of the Type-C common AC adapter 02 (sold separately) straight out from the external connection jack of the product
D Unplug the power plug of the Type-C common AC adapter 02 (sold separately) from the outlet
Although charging is possible even while the product is turned on, charging takes longer.
16

Turning the Power On/Off
Turning the Power On
A While the product is turned off, p (press and hold for at least 2 seconds)
After turning the power on, do not touch the display while “SHARP” is displayed (setting up the touch panel). Failure to do so might cause the touch panel to malfunction.
When you turn the power on for the first time you purchase the product, the initial settings screen appears automatically. For details, refer to “Making Initial Settings (zP.18)”.
Turning the Power Off
A p (press and hold for at least 2 seconds) B [Power off] Restarting the Product
The product turns off and then turns back on.
A p (press and hold for at least 2 seconds) B [Restart] Functions (menus regarding power) appearing when you press and hold p for at least 2 seconds Tap “Think if it might be a malfunction” to select an item and
diagnosis the product status. “Lockdown” appears when “Screen lock” is set to
“Pattern”/”Lock No.”/”Password”.
Forcing the Power Off
If the screen is frozen or the product cannot be turned off, force the power off.
A p (press and hold for at least 8 seconds)
If the power is forced off, unsaved data will be lost. Do not force the power off unless the product is inoperable.
Starting the Product in Safe Mode
The product turns off and then turns back on in a state similar to its state at the time of purchase. If operation of the product is unstable, an application installed after purchasing the product may be the cause. If the symptoms improve in safe mode, uninstalling the application may remedy the symptoms.
A p (press and hold for at least 2 seconds) B Touch and hold “Power off” or “Restart” [OK] While in safe mode, “Safe mode” is displayed at the bottom left of the screen. To exit safe mode, restart the product.
To start the product in safe mode when it is turned off, turn it on with p (press and hold for at least 2 seconds), and then press and hold | until the lock screen appears after the SHARP logo.
It is recommended that you back up data on the product before starting it in safe mode.
Widgets you created may be deleted by starting the product in safe mode.
Safe mode is not a normal state for the product to be started in. Exit safe mode for normal use.

Switching the Display Language to English

Show function names and other user interface items in English.

A Home screen [] (Apps) [] (Simple Settings)

B [] (All settings menu) [] (System) [] (Languages)

C [] (System Languages) [] (Add a language) [English]

D Drag layer

of [English (United States)] to the top

Locking/Unlocking the Screen
Locking the Screen
Prevent malfunction of buttons or touch panel when the display is turned off.
A While the display is turned on, p
The display also turns off after the time specified on “Screen timeout (Sleep)” has elapsed. When putting the product in a pocket or bag, turn off the display. Leaving the display turned on in a pocket or bag may cause the product to malfunction.
Unlocking the Screen
The lock screen appears when you turn on the display.
A While the display is turned off, p B Slide up the lock screen
If you set a screen unlocking method on “Screen lock”, unlock the screen with your specified method. If you set it to “None”, the lock screen does not appear.
With the fingerprint recognition function, you have only to touch the fingerprint sensor to unlock the screen.
Turn Screen On by Holding
If “Turn screen on by holding” is enabled, pick up the product and stop turns on the display. (This function is enabled at the time of purchase.) The display may not turn on in the following cases.
· when you are moving (walking or on board, etc.) while holding the product
· when you keep moving the product before and after you pick it up
· when you pick up the product vertically or horizontally
Lock Screen
Lock Screen
A Clock Display the current date, time, etc.
B Wallpaper Change the wallpaper on “Wallpaper” in the settings menu.
C Weather and step count Display the current weather and step count.
D Screen lock Slide ” ” up to unlock the screen.
If “Add text on lock screen” on “Lock screen” is enabled, the specified text is displayed on the lock screen.

Making Initial Settings
When you turn the power on for the first time you purchase the product, the initial settings screen appears automatically. Follow the on-screen instructions to set each function. Functions to set may vary depending on the operation conditions.
A Select the language
Tap “Vision settings” to use accessibility functionality for vision.
B [Start] C Set up Wi-Fi® connection D Select the setup method
You can transfer the data from your previous smartphone. Tap [Next] and follow the on-screen instructions.
E Set up a GoogleTM account F Confirm the contents of Google services, etc.
and set them up G Set up terminal lock H Confirm Google assistant and Google PayTM and
set them up I Check measures available for nuisance calls J Confirm software update K Confirm other items and set them up
If the confirmation screen to suspend the setup procedure, follow the on-screen instruction.
Setting Up a Google Account
The setup screen for a Google account appears when you start an application, etc. which needs a Google account though you have not set it up.
A Setup screen for a Google account enter your E-mail address or phone number/[Create account] If you already have your Google account, enter your GmailTM address or phone number [Next] Enter the password [Next] and follow the on-screen instructions. If you do not have your Google account, tap “Create account” and register the account following the on-screen instructions.
Though you can use the product without setting up a Google account, you cannot use Google services such as Gmail, Google PlayTM, etc.
You can also set up your Google account from the Home screen [Apps] [Simple Settings] [All settings menu] [Passwords & accounts] [Add account] [Google].
Making Initial Settings for au-mail
A m B Confirm the contents [Agree] C [] (Close) [SKIP] [OK]

Setting Permissions for Applications
When you first activate an application/function that accesses the product’s functions and information, First things first confirmation screen appears. · The type or contents of displayed confirmation screen varies
depending on the application/function.
Example: When activating +Message
A Confirmation screen to request permission to access [Allow]/[Don’t allow] Normally, allow use of the function. Repeat step 1 for other functions, if any.
Other Methods for Setting Permissions for Applications
Permissions for applications can also be set as follows.
Setting Functions to Use by Application
A Home screen [Apps] [Simple Settings] [All settings menu] [Apps] B [See all XX apps] Select the application [Permissions] C Select the function
D Select whether to allow
Setting Applications to Allow Use by Function
A Home screen [Apps] [Simple Settings] [All settings menu] [Security & privacy] [Privacy] [Permission manager] B Select the function
C Select the application
D Select whether to allow
If you do not allow an application/function to use the related functions, the application/function may not be activated or use of functions may be restricted.
A screen that explains the permissions may appear for some applications/functions. In addition, multiple confirmation screens may appear in a row or the contents may differ between applications/functions. Read the contents carefully, and then follow the on-screen instructions.
In this manual, descriptions about confirmation screens may be omitted.

Basic Operations
Using Touch Panel
The product’s display is a touch panel; operate with your fingers on the display. · The touch panel may not respond or may malfunction in the
following cases. Operation with gloved hands Operation with fingernails Operation with a foreign object left on the touch panel Operation with a protective film or sticker on the touch panel Operation with water drops or condensation on the touch panel Operation with wet or sweaty fingers Operation under water
Tap/Double-tap
Tap: Touch the screen lightly and briefly. Double-tap: Tap the same position twice quickly on the screen. · Select an item or icon displayed on the
screen. Double-tap on a still picture, etc. to enlarge/reduce it.
Touch and Hold
Keep touching an item, etc. · Available menu appears depending on the
item.

Slide/Swipe/Drag
Slide: Place your finger on the screen and move your finger in the desired direction. Swipe: Quickly slide a finger for a short distance. Drag: Touch an item on the screen and slide your finger across the screen. · Slide/swipe: Scroll the screen or toggle
pages. Operate the volume bar and brightness bar for adjustment. · Drag: Move an item or icon to the desired position.
Flick
Quickly brush the screen up/down or left/ right. · Toggle pages, enter characters using flick
input, etc.
Pinch
Touch the screen with two fingers and move them away from each other (pinch out) or toward each other (pinch in). · Enlarge/reduce a web page, etc.

Navigation bar

The following icons appear in the “navigation bar” at the bottom of the screen. Tap to use them.

Icon Back button Recent apps button

Description Return to the previous screen.
Open the recent apps screen.

Using the Home Screen
Home Screen
Most operations start from the “Home screen” or “Apps List screen”, which lists apps. Main operations are done on the Home screen. On the Home screen, main applications and “Rakutomo Link”, by which you can make a call or send an E-mail to registered contacts easily, are displayed.
Home Screen Layout
Tap “Apps” on the Home screen to display the Apps List screen. Tap “Back” on the Apps List screen to return to the Home screen.

Home Screen

App List Screen

A Status bar
B Google search bar You can use GoogleTM search or Google LensTM.
C Widget The weather widget displays date and time, as well as weather for the set region.
D Apps
E Rakutomo Link Register contacts you use frequently or those you use in trouble to call them quickly.
F Apps List Display the Apps List screen.
G Folder Tap the folder Tap the folder name to change the folder name. If you have not specified the folder name, tap “Edit Name” to specify it. If the indicator appears when tapping the folder, flick left or right to switch the page.
H Navigation bar Use the Back button to go back to the previous screen, and use the Recent apps button to open the recent apps screen.

Using Topic Screen
Slide up the Home screen to display the topic screen. The topic screen is a service which enables you to check optimum information based on your au ID information. * For UQ mobile users: some functions/services may be unavailable or
differ. · When you start it for the first time, tap [ (Agree and
use)].
A Slide up the Home screen
B Tap information you want to check

Registering Contacts to Rakutomo Links

the bottom of the Home screen) to make calls or create E-mail/SMS

easily.

· Save the contact with a phone number and E-mail address to

Address Book beforehand.

· The name of the registered contact appears under the Rakutomo

Link.

A Home screen / / [Yes] Select the contact to register [Next]

B Select an icon for the contact
The contact is registered to the Rakutomo Link. To select a preset icon: [Select from presets] Select an icon [Yes].

Returning to the Previous Screen or the Home Screen

If you have a wrong operation or cancel the operation, tap

on the lower left of the screen to return to the previous screen. In

addition, press h to return to the Home screen directly.

· If

is not displayed such as when you display a full-screen

photo, tap the screen to show

Using the Status Bar

Indicators

Notification indicators (missed calls, new mail, running operations, etc.) appear on the left side of the status bar, while status indicators appear on the right side to show the status of the product. · appears on the status bar if multiple notification/status
indicators cannot be displayed on the status bar.

Main Notification Indicators

Indicator

Description Time Remaining battery level is approx. 20 % or less. Missed call New au mail New +Message/SMS New Gmail Alarm information Calendar event Call (dialing, arriving, in progress) Call on hold Absence memo information Low free space in the internal memory Bluetooth® file reception request Data (upload/download, transmission/reception, etc.)
: Data upload/transmission : Data download/reception Update available Software update available

Main Status Indicators

Indicator –
–

Description
Battery level – : Charge remaining : Approx. 20 % or less
· While charging, appears in the battery indicator. If the product remains connected to the AC 100 V outlet or PC, keeps displayed even after the charge is full (charge is 100%).
· The remaining battery level can be displayed by “%” on the right of the battery indicator.
Airplane mode set
Signal strength (receiving electric field) – : Signal level : Out of service area
· A symbol indicating the network type*1 appears in the upper left corner. : 5G available : 4G available*2
· During communication, appears in the indicator. · If using both a SIM card/eSIM, an indicator is
displayed for each. The left indicator is for the SIM card, and the right indicator is for the eSIM.
Voice service unavailable
Roaming
“Do Not Disturb” set to ON
Handsfree call in progress
Microphone set to “Mute ON” during a call Wi-Fi® signal strength
– : Signal level · During communication, appears in the indicator. Bluetooth® in use
Determining location using GPS Wi-Fi® tethering in use

*1 If you are in a “4G” area, the “4G” network is available even outside the “5G” area.
*2 “LTE” and “WiMAX 2+” networks are available. “4G” appears for both networks. The product connects to the network deemed less congested by the Company based on the network traffic.

Using the Notification/Status Panel
In the notification/status panel, check the notification/status icon or activate applications corresponding to the notifications. In addition, set manner mode, auto rotate, etc.
Displaying the Notification Panel A Slide the status bar down

Displaying the Status Panel A Slide the status bar down with two fingers
Notification/Status Panel Layout

Notification Panel

Status Panel

A Brightness bar Slide the bar left or right to adjust brightness.
B Function buttons Change the settings of frequently used functions. Operations are different depending on the function.
C Notifications Check the status of the product and notifications. Tap a notification to activate the corresponding application. · Flick a notification to the left or right to delete it. Some notifications may not be deleted. · Slide the notification area up for hidden notifications. · Tap ” “/” ” to switch between detailed/simple display. On the detailed display, you can reply to the message directly, etc. from the displayed menu. · Touch and hold the notification to make settings for an application notification.
D Clear all notifications Delete all notifications. Some notifications may not be deleted.
E Power menu Display the Power menu. · For details, refer to “Turning the Power On/Off” (zP.17).
F Settings Make settings for the product.

Slide the screen up or down to switch between the notification panel and status panel.

Setting the Manner Mode

Avoid disturbing others around you in public. Available options are as follows.

Viberation

Ringtones and notification sounds are muted; the product vibrates.

Mute

Ringtones and notification sounds are muted; the product does not vibrate.

Manner OFF

Ringtones and notification sounds are not muted; the product vibrates according to its setting.

A Display the status panel [Manner mode]

Setting Airplane Mode
When Airplane mode is set, wireless functions such as Phone features, data communication, and wireless LAN (Wi-Fi®) are disabled.
A Home screen [Apps] [Simple Settings] [All settings menu] [Network & internet] B Tap “Airplane mode” to switch to ON
When using the product in Airplane mode on an airplane or in a hospital, etc., follow the instructions of the airline/facility.
When Airplane mode is set, calls cannot be made except to 110 (Police), 119 (Fire and Ambulance), or 118 (Regional Coast Guard Headquarters). Note that Airplane mode will be disabled automatically after the call.
When Airplane mode is enabled, calling and sending/receiving mail are not available. In addition, setting Airplane mode disables wireless LAN (Wi-Fi®). To use wireless LAN (Wi-Fi®) while Airplane mode is set, enable it after setting Airplane mode.

Character Entry
Switching Software Keyboards
Use a software keyboard to enter characters. The software keyboard appears when an entry field is selected on a character entry screen to save a contact, create a mail, etc.
Using GboardTM
This section describes basic operations of “12 keys keyboard” and “QWERTY keyboard”. Operations described in this manual are subject to change due to update of Gboard.

12 keys

QWERTY

* Each key display will be switched depending on the settings or status.

A Toolbar Use a clipboard or perform settings regarding character entry.
B Reverse toggle key/Undo key Enter characters in the reverse order of those you have entered or undo the confirmation of the entered characters.
C Cursor key Move the cursor or change the section of character to convert.
D Emoji key Display emoji or symbols.
E Input mode switching key Change the input mode.
F Delete key Delete characters.
G Space key Enter a space.
H Enter key/Line feed key Confirm the entered characters or insert a line feed at the cursor position.
I Keyboard switching key Switch keyboards.
J Shift key Toggle the character case.

Using Call Functions
Making Calls
Making a Call by Entering a Phone Number
A c B Enter a phone number
Include the area code for landline phone numbers even if they are in the same area code.
C [Call] Call connects
To adjust the call volume of the other party’s voice, press + or | during a call.
D [End call] Call ends.
Making a Call Using Call History
A c [History] B Select the record you want to use C [Call] Receiving Calls
Answering a Call
A When a call arrives, c Call connects B [End call] Call ends.
Answering a Call Using Absence Memo
A When a call arrives, [Menu] [Absence Memo] Playing Back Answer Phone/Voice Memos
A c [Menu] [Settings] [Calling accounts] [Answer phone] B [Answer phone list]/[Voice Memo List] C Select the answering memo/voice memo to play
back
The answering memo/voice memo is played back.
Functions for Nuisance Calls
Rejecting Calls with the Nuisance-Call Stop Button
The Nuisance Call Measures can only be used with the phone application preinstalled at the time of purchase.
A When call arrives/during a call, from a number not saved in Address Book or an unknown number, [] (Nuisance-Call Stop) red button [] (Nuisance-Call Stop) red button
The following voice guidance plays for the caller 3 times, and the call hangs up: “Kono denwa wa, ouke-suru koto ga dekimasen (This call cannot be accepted)”.
After a call ends, a screen may be displayed to allow you to block the phone number of the call you received. Tap “Block this number” to block the number. To not block the number, tap “Close”.
If the “” (Nuisance-Call Stop) red button is not displayed, Home screen [Apps] [Simple Settings] [Nuisance Call Measures], and set “Nuisance Alert Display” to ON.

Checking Your Own Phone Number
A Home screen [Apps] [Your number] Your own phone number is displayed on the bottom of “Own phone number”.
Saving Contacts to Address Book
A Home screen [Apps] [Address Book] B [Add new] C Enter information in the fields as needed D [Save] [Yes] Contacts saved in Address Book may be altered or lost due to accidents or malfunctions. It is recommended that you keep a copy of important phone numbers, etc. Note that the Company is not liable for any damages or lost profits resulting from alteration or loss of contacts due to accidents or malfunctions.

Using au Mail
* For UQ mobile users: use Gmail.
Sending au-mails
A m B [Create] Create mail screen appears.
C [ ] Select the recipient Tap the address
Alternatively, tap “To” to enter an address directly.
D Enter the subject [ ] E Enter the body text [ ] F [Send] [OK] Receiving au-mails
When an e-mail arrives, the mail ringtone sounds and m flashes. · When an e-mail arrives while the display is turned on (except in the
lock screen), a new e-mail notification appears and then appears in the status bar. A m
B Select [Inbox] or a created folder C Select the e-mail

Gmail

Using Gmail
E-mail service provided by Google. You can check and exchange Gmail and PC mail on the product. * UQ mobile users can use Rakutomo Link and the Mail key (m) together
with Gmail to send e-mail easily instead of au-mail. · Use of Gmail requires that you have your Google account. For
details, refer to “Making Initial Settings (zP.18) “. · You can synchronize your Gmail contacts with Address Book in the
internal memory. · For details on using Gmail, see the Google website, or read a help
file by navigating the main screen [ ] [Help & feedback]. · To use PC mail, set up a PC mail account in the Gmail screen.
A Home screen [Google] [Gmail] The main screen appears if an account is set up. If an application description appears the first time you start the application, confirm the contents and follow the on-screen instructions.

Sending Gmail
A Home screen [Google] [Gmail] B [Compose] Enter an address
After entering an address or the name of a contact in the address field, Gmail searches addresses in the Address Book, etc. and displays candidates. Select a candidate to set it as an address. After setting an address, you can continue entering addresses to add.
C Enter the subject D Enter the body text E[ ]

Receiving Gmail

A Receive Gmail
When Gmail is received, mail ringtone sounds.

appears on the status bar, and the

B Slide the status bar down

C Tap the received Gmail notification

Using Camera
Shooting Still Pictures
A Home screen [Camera] B Aim the out camera at the subject C [ ]/+/|
Recording Videos
A Home screen [Camera] B [Video] C Aim the out camera at the subject D[ ] E[ ] 24

Appendix
Updating Software
You can update the product to the most recent software for optimal performance and security improvement, and to get the latest enhancements.
A Home screen [Apps] [Simple Settings] [Software update] [Check for update] If there is an update, you can download and install it as needed. Then follow the on-screen instructions.
If is displayed on the status bar, slide the status bar down, tap the notification, and then follow the on-screen instructions.
You can use other functions while software update is in progress. However, installation will be suspended temporarily for 10 days after software update is notified if you are using other functions while software update is in progress. Tap “Resume” to restart installation and you can use other functions.
Notes on Software Update
· Large-volume data communication occurs for operating system updates. If you have a Wi-Fi® environment in your home, it is recommended that you connect to the Wi-Fi® network to update the software.
· Whenever a software update is available, the information will be announced on the au website, etc. for you. For details, contact an au Style/au shop or Customer Center (call toll-free 157). In addition, users of the product may receive a notice from au when software update is necessary to improve the functionality of the product.
· It is recommended that you back up data before updating the software.
· You need to restart the product to finish the software update. · If the software update has failed or stopped, perform it again. · A software update failure may disable the product. If this happens,
call Repair and Delivery Support Center. · Charge the battery adequately before performing the update. If the
battery level is low or if the battery runs low during the update, the software update will fail. · Check the signal reception. The software update may fail in poor reception areas. · The software update will not change data stored on the product (contacts, mails, still pictures, music files, etc.) or the settings. However, data may be affected by the update depending on the condition of the product (malfunctioning, damaged, water seepage, etc.). · While using the product overseas, a software update may not be available. What not to do during the software update: · Do not change locations.

Troubleshooting
Before you assume that the product is malfunctioning, check (Simple diagnosis) of ” (Usage support)” app. * For UQ mobile users: download the “(Usage support)” app
from Google PlayTM.
You can use (Simple diagnosis) on ” (Usage support)” app for free.
· You can also check the solution according to the diagnostic result. · Download ” (Usage support)” app from:
h( ttps://play.google.com/store/apps/details?id=com.kddi. newsupport&hl=ja) (Japanese)

* Tap [ (Diagnosis)] [ (Simple diagnosis)] of ” (Usage support)” app.

Problem

Suggestion/possible cause

Battery runs out · Avoid using the product in places where

fast

(out of service area) appears (zP.20).

· The internal battery has reached the end of

its life. Check the battery status (zP.16).

· The battery is not adequately charged

(zP.16).

· Disable functions you are not using (zP.20).

Cannot make calls · A proper SIM card is not inserted (zP.14).

· Setting is required before using an eSIM.

Inquire with the provider of an eSIM for

making settings for adding an eSIM.

· The phone number is incorrect or the area

code is missing (zP.22).

· Airplane mode is set (zP.21).

· The product is turned off (zP.17).

· Tap “Call” after entering the phone number

(zP.22).

Cannot receive · Reception is poor (zP.20).

calls

· You are outside the service area (zP.20).

· Airplane mode is set (zP.21).

· The product is turned off (zP.17).

· A proper SIM card is not inserted (zP.14).

· Setting is required before using an eSIM.

Inquire with the provider of an eSIM for

making settings for adding an eSIM.

· Turn the product back on.

The display is dim · If the temperature of the product becomes

high, the display will be dim automatically. If

the temperature becomes low, the display

will return to the normal brightness.

Cannot hear the · The call volume is too low (zP.22).

other party

· The earpiece is blocked with your ear.

Place the earpiece over your earhole.

microSD memory · The microSD memory card is not inserted

card is not

correctly (zP.15).

recognized /

· The microSD memory card is unmounted

Cannot find target (zP.15).

data

· The data is saved in the internal memory.

Data can be saved in the internal memory

besides microSD memory cards.

Cannot operate · Turn off the product and then turn it back on.

the buttons or

· The product is turned off (zP.17).

touch panel

Cannot charge · The power plug of the specified charger (sold

the battery

separately) is not securely plugged into the

outlet (zP.16).

· Do not use an unspecified AC adapter (sold

separately). Be sure to use a specified one;

otherwise, the product cannot be charged or

may result in deterioration of the internal

battery.

· The USB Type-C plug of the AC adapter (sold

separately) or the external connection jack of

the product may be stained. Clean the jack

with a dry and clean cloth and charge the

product again.

· If the notification lamp is flashing red,

charging is suspended. Use a specified

charger to charge the product.

· If the temperature of the product becomes

high, charging stops automatically. If the

temperature becomes low, charging will

resume.

Problem

Suggestion/possible cause

Cannot turn on · The internal battery is not adequately

the product

charged (zP.16).

· Make sure that you press and hold p

(zP.17).

· The product cannot be turned on shortly

after it turns off due to continued use with

the temperature of the product left high. Turn

it on after the temperature of the product

becomes low.

Cannot operate / · To force power off, press and hold p for at

Screen is frozen / least 8 seconds, and then release the key

Cannot turn off

after the screen turns off. Turn the product

the product

back on after a while (zP.17).

Cannot operate · Do not operate with gloved hands.

the touch panel as · Do not operate with fingernails or with a

intended

foreign object between the display and your

finger.

· Check the correct operation methods for the

touch panel (zP.19).

· Restart the product (zP.17).

· Press p on the side of the product to turn the display off, press p again to turn the

display on, and then make an operation.

Response to

· A large amount of data is stored in the

touch input or

product or large data is being exchanged

button operation between the internal memory and microSD

is slow

memory card.

A SIM card-related · A proper SIM card is not inserted (zP.14).

error message or · Setting is required before using an eSIM.

a message

Inquire with the provider of an eSIM for

indicating that the making settings for adding an eSIM.

card is not

inserted appears

Cannot use Osaifu-Keitai®

· The battery has run out (zP.16).

The product turns · The battery has run out (zP.16).

off unintentionally · If you continue to use the product with the

internal temperature of the product left high,

the product turns off automatically. Turn it on

after the temperature of the product

becomes low.

The product turns · The battery has run out (zP.16).

off after the

power-on logo

appears

(out of service · Reception is poor (zP.20).

area) is displayed · You are outside the service area (zP.20).

· Your hand is on the 5G/4G/UMTS antenna

area (zP.14).

· A proper SIM card is not inserted (zP.14).

The display

· Manner mode is set (zP.21).

illuminates but the

ringtone does not

sound

Low-battery

· The battery is almost empty (zP.16).

related message

is displayed

The product

· Manner mode is set (zP.21).

answers a call

unintentionally

Call does not

· Reception is poor (zP.20).

connect and a

· You are outside the service area (zP.20).

beep is heard

· The network or number is busy. Try again

from the earpiece later.

Operations

· The application installed newly may cause

become unstable unstable operations. Turn the product on in

after an

safe mode and uninstall the application

application is

(zP.17).

newly installed

A balloon appears · On some applications, touching and holding

after touching and the icon displays a menu. Menu details vary

holding an icon

depending on the application.

· If you do not use the menu, press h or tap

any part of the display other than the menu

item to return to the normal screen.

After-Sales Service

When Requesting a Repair
For repair, contact Repair and Delivery Support Center.

Documents / Resources

BASIO active2 SHG12 Simple Smart Phone 6 Case [pdf] Instruction Manual
SHG12 Simple Smart Phone 6 Case, SHG12, Simple Smart Phone 6 Case, Smart Phone 6 Case, Phone 6 Case, 6 Case, Case

References

User Manual

BASIO active2 SHG12 Simple Smart Phone 6 Case

Specifications

Basic Operations

Online Manual Access

Navigation and Button Operations

Frequently Asked Questions

Documents / Resources

References

Leave a comment

Cancel reply