BAFANG Go APP
Product Specifications
- Manufacturer: Bafang Electric (Suzhou) Co., Ltd
- Model Number: [Insert Model Number]
- Weight: [Insert Weight]
- Dimensions: [Insert Dimensions]
- Power Source: [Insert Power Source]
Unpacking and Setup
When you receive the product, carefully unpack it and ensure all components are included. Follow the provided assembly instructions to set up the product correctly.
Powering On the Product
Before using the product, ensure it is connected to a suitable power source. Power on the device following the instructions in the user manual.
Operating the Product
Once powered on, familiarize yourself with the product controls and features. Refer to the user manual for detailed instructions on operating the product effectively.
Maintenance and Care
Regularly inspect the product for any damage or wear. Keep the product clean and follow maintenance guidelines provided in the user manual to ensure optimal performance.
FAQs
Q: Can I copy or pass on the user manual to third parties?
A: No, all rights are reserved by Bafang Electric (Suzhou) Co., Ltd, including property rights. Copying or passing on the manual is forbidden.
Q: What should I do if the product does not power on?
A: Check the power source and connections. If the issue persists, contact customer support for further assistance.
Q: How often should I perform maintenance on the product?
A: Regular maintenance is recommended as per the guidelines in the user manual. Frequency may vary based on usage and environmental conditions.
All rights reserved by Bafang Electric (Suzhou) Co., Ltd, also in case of property rights. Any disposal such as copying and passing on to third parties is forbidden.
All rights reserved by Bafang Electric (Suzhou) Co., Ltd, also in case of property rights. Any disposal such as copying and passing on to third parties is forbidden.
1 Introduction
1.11
Preface
The manual is prepared for users of Bafang Go, which is independently developed by
Batang.
All the contents of the manual are copyrighted by Bafang Electric (Suzhou) Co., Ltd., and
any company, media, website or individual shall not reproduce, link, repost or publish in any
other ways without the authorization of the agreement of our company. Companies, media and
websites authorized by
our company’s agreement must indicate “Source: Bafang Electric
(Suzhou) Co., Ltd.” when downloading and using contents in the manual. Our company will be
held responsible for any violations according to relevant legal obligations.
Reading advice: Enterprise end users should read the entire manual, and others can use it as
a reference for understanding and using the app. The screenshots in the manual are used for
reference only, and the actual interfaces may vary for improvement without notice.
1.2
Product Function Introduction
Bafang Go integrates the smart cycling protocol and functions developed by Bafang. The
brand-new design and smart cycling development can comprehensively control the smart cycling
components self-developed by our company. It can conveniently and quickly realize the
operations of viewing the eBike status and riding track. In addition, a navigation system is
provided to help users find the riding destination and the optimal route.
Personalized ride modes: To
get a diverse riding experience, the user can set riding
parameters of different ride modes.
Map navigation: Users can realize route guidance through the built-in navigation map of the app.
Virtual HMI: Two modes, vertical screen & horizontal screen. Information display: navigation
route information, ride mode status, headlight status, real-time speed, and so on.
Navigation voice can be set to off or on by the user.
Ride activity record: Includes 3 modules, “Overview”, “Stats”, and “Charts”.
Third-party data synchronization: The app supports Strava platform docking, and will automatically synchronize the ride activity record to the associated Strava account after
riding.
1.3
Outside Mainland China:
Downloading and Installation
2 Login Function
2.1
User Registration
(1) The registration and login functionality currently supports email-based account creation
and authentication.
(2) Before using the app, users must complete the registration and log-in process via email. To
register, tap the “Sign Up” button in the log-in pop-up window.
5
2.2
User Login
(1) To log in, enter the e-mail and password and check the box to agree to the “User Agreement”
and “Privacy Policy”.
1) Enter your e-mail and password.
2)
Check the box marked “I have read and agreed to the User Agreement and
Privacy Policy”.
(1) Turn on the Bluetooth of your phone.
(2) Tap “eBikes” to open your eBike list (Fig. 3-4).
(3) Tap “+” in the upper right corner (Fig. 3-5).
(4) Tap “Connect eBike” to search eBikes nearby (Fig. 3-6).
(5) Select the eBike you want to connect and tap “Connect” (Fig. 3-7).
(6) After successful connection, it will automatically jump to the page shown in Fig. 3-8,
and the name of the connected eBike will appear on the page.
1) Unit setting: Supports switching between metric and imperial units.
2) Time format: Supports switching between 24h and 12h.
3) Auto-off time can be set by the user.
(6) OTA update
When an eBike component’s firmware is updated, the app will automatically push
notifications. To update the firmware, tap “Update”. If the update failed, turn off the eBike, and
restart it. Try to reupdate.
Documents / Resources
 |
BAFANG Go APP [pdf] User Guide Alpha SO, Magician Ebikes, Go APP, APP |