CSAZ-1002 Cube Plus
“
Specifications:
- Type: Cube Plus
- Model Name: Cube Plus CSAZ-1002
- Side Panel Window: Tempered glass
- Max CPU Cooler Height: Up to 200 mm
- Max Video Card Length: Up to 400 mm
- Power Supply: Not included
- Motherboard Compatibility: ATX (Back-connect
supported), Micro ATX, ITX - Expansion:
- External 5.25 Drive Bays: 0
- Internal 2.5 Drive Bays: Up to 1
- Internal 3.5 Drive Bays: Up to 1
- Expansion Slots: 7
- I/O Ports: Power button, LED button, HD Audio
Combo, USB 3.0 x 2, Type C x1 - Physical Specifications:
- Dimensions (HxWxD): 689 x 626 x 723 mm / 27.1
x 24.6 x 28.4 inches - Weight: 12.7 Kg /28 lbs
- Dimensions (HxWxD): 689 x 626 x 723 mm / 27.1
Product Usage Instructions:
Glass Panel Installation:
To install the glass panel, carefully align it with the
designated slots and gently slide it into place until securely
attached.
All Panels Removal View:
To remove all panels for access or maintenance, start by
unscrewing the panel screws and then gently lift each panel off the
case.
Fans Installation:
To install fans, locate the fan ports and align the fans
accordingly. Secure them in place using the provided screws or
clips.
Storage Drive Installation:
To install storage drives, position the drive in the designated
bay and secure it using screws. Ensure proper alignment for a
secure fit.
Power Installation:
Mount the power supply unit from the side with the fan facing
down for efficient cooling and proper cable management.
Panel Installation:
To install panels, align them correctly with the case and gently
slide or press them into place until securely attached.
FAQ:
How do I control the Addressable RGB lighting?
The Addressable RGB devices connected to the AZZA HUB can be
controlled using the LED button on the case or through compatible
motherboard lighting software.
What size fans can I install in this case?
The case supports up to three 120mm fans in the front, three on
the motherboard side, and one in the rear for optimal cooling
performance.
What type of cooling solutions does the Cube Plus support?
The Cube Plus supports water cooling solutions with radiators up
to 360mm in both the rear and motherboard side locations for
efficient heat dissipation.
“`
Cube plus
Model Model Name Model Number Specifications Type Side Panel Window: Max CPU Cooler Height Max Video Card Length Power Supply Motherboard Compatibility Expansion External 5.25″ Drive Bays Internal 2.5″ Drive Bays Internal 3.5″ Drive Bays Expansion Slots I/O Ports Physical Specifications Dimensions (HxWxD) Weight Features
Addressable RGB Light
Available Fan Port
Water Cooling
Power Supply Support Included Accessories
Cube Plus CSAZ-1002
NCT Left side panel: Tempered glass UP to 200 mm Up to 400 mm long video card Not included ATX(Back-connect supported)eMicro ATXeITX
0 Up to 1 Up to 1 7 Power button, LED button, HD Audio Combo, USB 3.0 x 2,Type C x1
689 x 626 x 723 mm / 27.1 x 24.6 x 28.4 inches 12.7 Kg /28 lbs
Addressable RGB devices connected to the AZZA HUB can be controlled with the LED button or motherboard lighting software.
3x120mm fan ports in the front (Included FNAZ-12DRGB3/HURRICANE III x 3) 3x120mm fan ports on the mb side 3x120mm fan port in the rear (Included FNAZ-12DRGB3/HURRICANE III x 3)
Supports radiators up to 360mm in the rear Supports radiators up to 360mm in the mb side
Bottom mounted ATX Power Supply AZZA Hub(ARGB+PWM controller)
Front I/O
Power button, LED button HD Audio Combo, USB 3.0 x 2,Type C x1
Glass Panel Installation
All Panels Removal View
Fans Installation
Supports up to 120 mm x 3
or 360 mm water cooling
MB Support ATX M-ATX Mini-ITX
GPU Support GPU (up to 400mm)
Storage Drive Installation
Supports up to 1 x 3.5″ HDD or 1x 2.5″ SSD
3.5″
2.5″
x1
x1
Power Installation
Mounted from the side, with the fan facing down
Panel Installation
Documents / Resources
 |
AZZA CSAZ-1002 Cube Plus [pdf] Owner's Manual CSAZ-1002 Cube Plus, CSAZ-1002, Cube Plus, Plus |
