AXXESS AXDI-P04 Installation Guide
Porsche(with M.O.S.T. 25 amplifier)
Data Interface 2004-2009
INTERFACE FEATURES
- Provides accessory power
- Retains R.A.P. (retained accessory power)
- Designed for amplified models
- Provides NAV outputs (parking brake, reverse, speed sense)
- Retains balance
- Micro-B USB updatable
INTERFACE COMPONENTS
- AXDI-PO4 interface
- AXDI-PO4 amplifier interface
- AXDI-PO4 harness
TOOLS REQUIRED
- Wire cutter
- Crimp tool
- Solder gun
- Tape
- Connectors (example: butt-connectors, bell caps, etc.)
Product Info
CONNECTIONS
From the after market radio to the AXDI-PO4 harness:
- Connect the Black wire to the ground wire.
- Connect the Yellow wire to the battery wire.
- Connect the Red wire to the accessory wire.
- If the aftermarket radio has an illumination wire, connect the Orange wire to it.
- Connect the Blue/White wire to the amp turn-on wire.
The following (3) wires are only for multimedia/navigation radios that require these wires.
- Connect the Blue/Pink wire to the VSS/speed sense wire.
- Connect the Green/Purple wire to the reverse wire.
- Connect the Light Green wire to the parking brake wire.
- Tape off and disregard the following (8) wires, they will not be used in this application: Gray, Gray/Black, Green, Green/Black, Purple, Purple/Black, White, White/Black
- Connect the Red and White RCA jacks to the front amplifier output jacks of the aftermarket radio.
INSTALLATION
With the key in the off position:
- Connect the AXDI-PO4 harness to the AXDI-PO4 interface.
- Connect the AXDI-PO4 harness to the AXDI-PO4 amplifier interface.
- Remove the dust cover from fiber optic port in the AXDI-PO4 amplifier interface.
- Connect the factory fiber optic cable into the AXDI-PO4 amplifier interface.
- Connect the AXDI-PO4 harness to the wiring harness in the vehicle.
Having difficulties? We’re here to help.
Contact our Tech Support line at:
1-800-253-TECH
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected
mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP
certified technicians
Documents / Resources
 |
AXXESS AXDI-P04 [pdf] Installation Guide AXDI-P04 |
