AXAGON PCEM2-XS Solid Internal PCIe Adapter

Instructions for use:

1. Mount the SSD disk.
2. Turn off your computer and unplug the power supply cable.
3. Open the cabinet and insert the adapter into a free PCI-Express position.
4. Close the case, connect the power and turn on the computer.
5. Automatic installation will take place-no drivers are required.
6. SSD disk is ready.
7. Check the successful istallation in Device Manager.
8. Initialize and format the new disk in the disk manager. (fig B)

Internal PCIe Adapter for connection NVMe M.2 SSD

1. UNSCREW THE HEAT SINK
   

   

2. ONLY FOR ONE SIDED M.2 SSD DISK III
   

   

3. INSERT THE M.2 SSD DISK
   

   

4. Fix the M.2 SSD Disk
   

   

5. INSERT THE UPPER THIN COOLING PAD
   

   

6. COMPLETE THE PCIe ADAPTER
   

   

FIGURE A:

FIGURE B:

TECHNICAL SPECIFICATIONS

• INPUT INTERFACE
  NVMe (PCle) M.2 SSD DI SK
  Single and double sided
  All capacities supported
• OUTPUT INTERFACE
  PCI-EXPRESS (All specifications)
  supported x4 I x8 I x16 slot• Theoretical speed up to 8Gbps (Bidirectional)
• LENGHT SUPPORTED
  2230 I 2242 / 2260 I 2280 (22xl0-22x80mm)
• COOLING
  copper holes through the PCB+ thermal pads+ heatsink with ribbed surface for better heat dissipation
• SIZE & NET WEIGHT
  10Sx45x 12 mm&Slg
• POWER SUPPLY
  Powered via PCI-Express bus
• LED INDICATION
  Decent LED indicates disk connection and data transfer
• OTHER FEATURES
  Automatic installation – No driver needed
  BOOT• NVM Exp,ess • Plug and Play
• OS SUPPORTED
  All OS supported
  Note: When ‘Mndows 7 used it is necessary to check OS support and driver availability with the M-2 SSD manufacturer.

Documents / Resources

AXAGON PCEM2-XS Solid Internal PCIe Adapter [pdf] Instructions PCEM2-XS Solid Internal PCIe Adapter, PCEM2-XS, Solid Internal PCIe Adapter, Internal PCIe Adapter, PCIe Adapter, Adapter

References

• User Manual