AUTOMATE S35-STD Zero Li Ion Q0.7
Product Usage Instructions
- When paired with a remote, the motor will move the shade to indicate battery percentage.
- To recharge the battery, utilize any micro USB cable and charger to renew the battery. A custom motor charger is not required.
- The motor slows down before coming to a complete stop at the limit or target position for a smooth operation.
- The motor head design accommodates a bracket with a 12mm tongue for a more secure fit.
- The motor can be swapped easily without system deductions, or bracket adjustments, and achieves minimal light-gap.
Introduction
- The rechargeable, battery-powered motor for small to medium shades in residential and small commercial projects.
Patented Motor Head Design
Offers the smallest light-gap and antenna cable can be concealed within the motor head.
Quiet Operation
Superior acoustic performance makes this our quietest motor range yet.
Battery Check Action
When paired with a remote, the motor will move the shade to indicate battery percentage.
Secure Hold
The motor head design accommodates a bracket with a 12mm tongue for a more secure fit.
Innovative Motor Cap
Optional, custom-designed accessory for no visible wires.
Elegant Soft Stop
Slows the motor down before coming to a complete stop at the limit or target position.
Micro USB Charging
Custom motor charger not required.- Utilize any micro USB cable and charger to renew the battery.
Simplified RetroFit
A motor can be swapped yet the system retains deductions, bracket adjustments are eliminated and minimal light-gap is achieved.
Warranty
- 5 YEAR WARRANTY
Product Specifications
Part #: MT01-1325-069032 Zero Li-ion 0.7Nm Q Motor [Ø25/5V/20RPM]
| Voltage | 5 | Limit Switch Type | Electronic |
| Torque | 0.7Nm | Current | 0.73 A |
| Max Run Time | 12 min. | Battery Size/Type | 2600mAH |
| Speed | 20 RPM (Adjustable to 24 or 28) | Temp Working Range | 32°F to 140°F (0°C to 60°C) |
| Radio Frequency | 433.92 MHz | Insulation Class | III |
| RF Modulation | FSK | Sound Level | ~35 dB |
| IP Rating | IP20 | Power | 6 W |
Compatible Tubes
Applications
- Roller Shades
- Roman Shades
Dimensions
| DIM X | DIM Y | Ø Head Diameter |
| [18.85“] 479mm | [0.98”] 25mm | [1.87”] 47.5mm |
Compatible Products
Controllers
Charging Options
Motor Cap
Sensors
MT01-1325-069032_Automate Zero Li-ion 0.7Nm Q Motor_v1.3_September 2024 A Division of Rollease Acmeda
ARC™ (Automate Radio Communication) is Rollease Acmeda’s proprietary technology utilizing 433MHz radio communication with bi-directional feedback that brings Automate motorized shading systems together.
FAQ
- Q: Is a custom motor charger required for recharging the battery?
- A: No, you can utilize any micro USB cable and charger to recharge the battery.
- Q: What is the sound level of the motor during operation?
- A: The motor operates at a sound level of approximately 35 dB.
- Q: What is the radio frequency used for communication?
- A: The motor uses 433.92 MHz radio frequency for communication.
Documents / Resources
 |
AUTOMATE S35-STD Zero Li Ion Q0.7 [pdf] Installation Guide S35SS3T5DSTD, S35SH3D5HD, S35-STD, S35-HD, S40-STD, S45-LIGHT, S45-STD, S45-HD, S35-STD Zero Li Ion Q0.7, S35-STD, Zero Li Ion Q0.7, Li Ion Q0.7, Ion Q0.7 |
