TL7002-WF WIFI Module
“
Product Specifications
- Transmission Frequency (GHz): WiFi 2.412~2.462, Bluetooth
2.402~2.480 - Max Transmission Power: 802.11b: +11.5dBm(@1Mbps), 802.11g:
+13.7dBm(@6Mbps), 802.11n: +12.7dBm(@HT20,MCS0) - Power Supply Voltage: DC12V
- Peak Supply Current: 260mA
- Average Supply Current:
- STA, networked standby: 24mA(DTIM1)
- STA, 1KB/s: 54mA
- AP: 85mA
- Working Temperature: -40°C to 85°C
- Storage Temperature: -40°C to 125°C
Product Usage Instructions
Disposal Instructions
Dispose of the old appliance marked with the symbol
appropriately. Consult local authority for organized disposal
methods.
Installation
Install the WIFI module indoors or outdoors, avoiding direct
sunlight. Scan the provided QR code to download the APP.
Functional Description
State Indicator: The state indicator shows
different colors based on the current state of the device.
Account Login: Use email address and password
for registration, login, or password reset.
Account Registration:
- To register an account, click 1 to jump to the Account
Registration interface. - Fill in relevant information and click 2 to receive
verification code. - Read the Privacy Policy by clicking 3, agree by clicking 4, and
complete registration by clicking 5.
Log in:
Enter registered email address and password and click 6 to
access the device list.
Forgot Password:
If you forget your password, click 7 and follow the instructions
on the Forgot Password interface (Fig.3).
Frequently Asked Questions (FAQ)
Q: Can the WIFI module be used outdoors?
A: Yes, the WIFI module can be installed both indoors and
outdoors.
Q: What is the power supply voltage required for the
module?
A: The module requires a DC12V power supply voltage.
“`
WIFI Module
USER’S MANUAL
Please read this user’s manual carefully before use Please keep this user’s manual properly. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Basic Parameters
Form Transmission frequency
(GHz)
WiFi 2.412~2.462 802.11b: +11.5dBm(@1Mbps)
Bluetooth 2.402~2.480
Max transmission power 802.11g: +13.7dBm(@6Mbps)
1.64dBm
Power Supply Voltage (V)
802.11n: +12.7dBm(@HT20,MCS0) DC12V
Peak (continuous transmission): 260mA
Supply Current
Average (STA, networked standby): 24mA(DTIM1) Average (STA, 1KB/s): 54mA
Average (AP): 85mA
Working Temp() Storage Temp()
-40~85 -40~125
Disposal instructions
Disposal of the old appliance
Appliance marked with the symbol shown here must not be disposed of in the domestic refuse. You are obliged to dispose of such old electronic appliances separately. Please consult your local authority about the possibilities of organised disposal. With this environment-friendly form of disposal, old appliances are recycled or used in other forms.
Installation
There is a magnet on the back of the WIFI module, it can be installed indoors or outdoors, and avoid direct sunlight; Please scan the following QR code to download APP;
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Functional Description
State indicator
Configuration button Short press: Available to enter into AP Link con guration mode.
The starte indicator status is as follows
Color
State
Red
Configuring Network
Purple
Connecting the router
Blue
Connecting to the server
Green Flicker
Normal communicate with server Abnormal communication with main board
Account Login
Use email address and password to register, login or reset the password.
Username Enter Email Enter PassWord Confirm password
Enter Email verificatio… Privacy Policy
Enter Email Enter PassWord
2
1
3 4 5
Enter Email
8
Enter Email verification code
Enter PassWord
Confirm password
7 6
9
Fig.2 Account Registration interface
Fig.1 Login interface
Fig.3 Forgot Password interface
1. Account Registration: To register an account, click 1 (Fig.1) to jump to the Account Registration interface, fill in the relevant information and click 2 to receive verification code, while completed the application information, click 3 to read the details of the Privacy Policy, then click 4 to agree, and click 5 , registration is done. Please note, the valid time of one verification code is 15min, please fill in the verification code within 15min, otherwise you need to ask for a new one.
2. Log in: Follow the instructions on the page(Fig.1 ), enter your registered email address and password, click 6 and jump to device list;
3. Forgot Password: While forget your password, click 7 (Fig.1 ), jump to the Forgot Password interface (Fig.3 ). Follow the instructions on the page, fill in the relevant informations, click 8 to receive verification code from your mailbox, click 9 to comfirm and password reset is done.
Add Device
After log in, displays My Device interface (Fig. 4) , follow the instruction to add WIFI or DTU.
1
2
1
2
Fig.5 The left-hand menu
Fig.4 My Device interface
Fig.6 Add Device interface
WIFI Configure Network
Enter PassWord
Fig.7 Enable user permission
Fig.8 WIFI Module On interface
Fig.9 Enter password interface
1. Follow the instructions on the page (Fig.8), press button on module and hold for 1s till two lights on, then AP connection is activated;
2. Click “Next” to enter the wifi password for the current connection(Fig 9), the APP automatically searches for wifi module (Fig 11
Fig.10 Searching device interface
Fig.11 Bond device interface
WIFI Configure Network
3. Click “Bond device” Fig.11to allow the App to use the camera for scanning the serial number/wifi code on the heat pump(Fig.12.1), or click “Manual input” to enter the serial number/wifi code(Fig.12.2); 4.Click “Confirmed”, device bond is done (Fig.13); 5. After WIFI bonding is done, and jump back to My Device(Fig. 14).
Fig.12.2 Manual input interface
Fig.12 Scanning interface
Fig.12.1 WF/SN barcode
delete
Fig.13 Bond device done interface
Fig.14 Device management interface
Fig.15 Device Main interface
Device Management
Device management operations are as below :
back Warning
1 Display the current operating mode
Click to adjust the target temp. Display the latest 3-day weather
1
back
2 Fig.39 Device Main interface
2 3
Fig.40 The right-hand menu interface back
Click to adjust the timing settings Click to adjust the timing mute settings
4 Click to switch on/ o on: green o : grey
5
Display the error
4
3
5
Click to read the solution
Fig.42 Timing Settings interface
Fig.41 Device Main interface
Fig.43 Troubleshooting interface
ICON
NAME
ON/ OFF Silent Mode Off Silent Mode On
Mode shift Cooling Heating Auto
Timming settings Troubleshooting
Menu
FUNCTIONS Click it to turn on/ off the unit Display silent mode off, click it to activate the silent mode Display silent mode on, click it to turn off the silent mode Mode changing: Cooling–Heating–Auto Display Cooling mode, click it to change operating mode Display Heating mode, click it to change operating mode Display Auto mode, click it to change operating mode Click it to jump to the timer on/ off and mute timer setting interface Click it to jump to the troubleshooting interface Click to unfold or collapse the menu
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Code: 20241105-01
Documents / Resources
 |
Aquatemp TL7002-WF WIFI Module [pdf] User Manual TL7002-WF WIFI Module, TL7002-WF, WIFI Module, Module |