AQFORM Multitrack High Surface System Installation Guide
INSTALLATION INSTRUCTION
REQUIRED
straight microtrack line requirement
screw
end cup
power supply
mounting element
end cup
power supply
mounting element
power supply dimensions
| DRIVER | 60W | 100W | 200W |
| L [mm] | 163 | 300 | 390 |
| M [mm] | 43 | 30 | 30 |
| H [mm] | 32 | 17 | 23 |
- optional element
- optional element
mechanical connection
| „L” – connection | |
1 |
2 |
| straight – connection | |
1 |
2 |
electrical connection
| „L” – connection | |
1 |
2 |
| straight – connection | |
1 |
2 |
on / off (+ optional DALI)
Double circuit on / off 
DALI example
(for double on/off circuit connection – replace DALI by 2nd 48V power line)
Documents / Resources
 |
AQFORM Multitrack High Surface System [pdf] Installation Guide Multitrack High Surface System, High Surface System, Surface System, System |
