APLISENS APIS-100 Electr Opneumatic Positioner Apis
Product Information
Specifications
- Additional errors:
- From supply pressure changes
- From ambient temperature changes
- From vibration in range: 10…60Hz, amplitude < 0,35 mm 60….500Hz, acceleration 5g
- Protection degree of positioner enclosure: IP 65 according to PN-EN 60529:2003
- Operation position: Any
- Weight: 1.8 kg
- Allowable vibrations – 10…60Hz, 60…500Hz
Product Usage Instructions
Operating Conditions
XI/ 2
Ordering Procedure
Intend use:
- For single-operating actuator: 1
- For double-operating actuator: 2
Frequently Asked Questions (FAQ)
What is the IP rating of the positioner enclosure?
The protection degree of the positioner enclosure is IP 65 according to PN-EN 60529:2003.
Electropneumatic positioner APIS
- HART protocol
- ATEX certificate II 2G Exia IIC T5/T6 Gb
- Simple in installation and programming
- Diagnostic functions
- Possibility of remote assembling of positioner
- Low air consumption
- Programmable speed of movement of the actuator’s piston rod
- Position transmitter
- Possibility of manual controlling of position of actuator’s piston rod
Technical data
- Input signal (control) 4…20mA + Hart
- Output signal (position transmitter) 4…20mA
- Supply of position transmitter 10÷36 VDC (Ex 10÷30 VDC)
- Supply pressure 140÷800 kPa
- Pneumatic input signal (control actuator) 0…100% of supply pressure
- Own air consumption ÷ 0,035 kg/h for supply pressure 140 kPa
- ÷ 0,015 kg/h for supply pressure 600 kPa
- Air mass stream on positioner output ÷3,25 kg/h at supply pressure 140 kPa
- ÷13kg/h at supply pressure 800 kPa
- Actuator piston rod displacement range 10÷100 mm (for single-acting linear actuators)
- 80÷900 mm (for double-acting linear actuators)
- 0÷180° (for rotational actuators)
- Actuator operation characteristics linear
- Positioner operation mode normal or reversible
- Positioner transducer mode normal or reversible
- Additional errors
- from supply pressure changes
- from ambient temperature changes
- from vibration in range:
- 10…60Hz, amplitude < 0,35 mm
- 60….500Hz, acceleration 5g
- < 0,05% / 100kPa
- 0,15% / 10°C – for temperature range -30°C÷+60°C
- 0,25% / 10°C – for temperature range -40°C÷-30°C and +60°C÷+85°C
- 0,25%
- Hysteresis < 0,4%
- Insensibility threshold < 0,1%
- Protection degree of positioner enclosure IP 65 according to PN-EN 60529:2003
- Operation position any
- Weight 1,8 kg
Operating conditions
- Working medium air free of dust, oil, aggressive pollutants, solid particles bigger than 1.5 μm, such relative humidity not lower that dew point’s temperature should not be lower than 10°C with respect to ambient temperature (acc. to PN-EN 60654-2:1999).
- Ambient temperature -40÷85°C
- (Ex version) for T5 -25÷60°C; for T6 -25÷45°C (with standard manometers) for T5 -40÷80°C; for T6 -40÷45°C (with stainless steel manometers)
- Executions with manometers in stainless steel
- Humidity of ambient air < 95%
- Allowable vibrations
- 10…60Hz,
- 60…500Hz
- acc. to PN-EN 60654-3: 1997; class VH6
- amplitude < 0,35 mm
- acceleration ≤ 5g
Ordering procedure
- For double-operating linear actuator.
- Not available with ATEX
- For single-operating linear diaphragm actuators and single and double-operating rotational actuators
- The positioner can set reverse of analogue output signal (20…4 mA). The reverse function of the output signal is switched on programmatically by the user.
| Mounting kit | Type of actuator | |
| APIS-A000 | For APIS-100-… | Type P or R, Polna S.A. (mounted on the columns) |
| APIS-A001 | Type 37 or 38, Polna S.A. (yoke) | |
| APIS-A002 | Type P1 or R1, Polna S.A. (diaphragm multi-spring) | |
| APIS-A003 | Actuator acc.PN-EN 60534-6-1:2001 (Samson, Arca Regler) | |
| APIS-A050 | For APIS-X00-… | Actuator acc. EN ISO 5211, DIN 3337, VDI/VDE 38450 Namur, (Air Torque, Ebro-Armaturen, El-O-Matic) |
| APIS-AXXX | For APIS-201-… | Actuator acc. ISO 6431 (CNOMO Prema Kielce) |
| -SS | Material: stainless steel | |
| -SO | Material: zinced steel |
Documents / Resources
 |
APLISENS APIS-100 Electr Opneumatic Positioner Apis [pdf] Owner's Manual APIS-100, APIS-X00, APIS-201, APIS-100 Electr Opneumatic Positioner Apis, APIS-100, Electr Opneumatic Positioner Apis, Opneumatic Positioner Apis, Positioner Apis, Apis |
